Castorit Super C, weight 150g, 1 pc
Precision investment material for NiCr and CoCr alloys in crown and bridge technology containing phosphate for high-shrinkability alloys.
Characteristics:
- Contains no carbon or graphite.
- Very good consistency of the mixture.
- Smooth castings.
- Exact fit.
- Controlled expansion.
- Easy release of castings from casting rings.
- Thermal stability.
- Application time 4 min.
Packaging:
- 150g.
Castorit Super C 1000ml - The liquid is sensitive to low temperature - shipping in winter at the customer's risk.
Castorit super C mass liquid.
Attention:
The liquid is sensitive to frost!
Shipment of goods in winter at the customer's risk.
Packaging:
- 1000ml.
Wirovest investment material 400g 1 pc
Phosphate bonded investment material for framework dentures. The smooth surfaces of the models facilitate modeling and ensure equally smooth surfaces of castings. Very high expansion and hardness of the models are obtained thanks to the use of the BegoSol mixing liquid.
Product Details:
- Onset of clotting (Vicat time) approx. 5 minutes
- Compressive strength [MPa] 15 MPa
- Linear thermal expansion [%] 1.15%
- Working time at 20 °C approx. 3 minutes.
- Shelf life in unopened packaging 24 months
Packaging:
- 400g
Bellavest T investment material 160g 1pc
Graphite-free investment material for precision casting of crowns and bridges for precious and non-precious metals.
Characteristics:
- High edge strength and easy release.
- Mixing time at 20 °C - approx. 5 min.
- Mixing time at 27 °C - approx. 3 min.
- Total ring expansion with 100% BegoSol solution - 3%.
- Recommended fluid: BegoSol He and BegoSol.
Packaging:
- 160g.
BegoSol 1000ml - The liquid is sensitive to low temperature - shipping in winter at the customer's risk.
Begosol is a liquid intended for mixing BEGO, Wirovest, Wirovest Plus, Wirofine, Belavest T investment materials.
Packaging:
- 1000ml.
Note: The liquid is sensitive to frost - shipping at the customer's risk.
Rema Exact investment material 400g
Rema Exakt. Quick-setting investment material for partial dentures, for making models and casting rings. The obtained castings adhere precisely to the working models.
**Physical data at room temperature and with 100% mixing and mixing liquid:*
- Processing time 3 min 45 sec.
- Flow properties: 110-120 mm.
- Thermal expansion: 1.00%.
- Compressive strength: 12-15 MPa.
- Preheating temperature: 950-1000 °C.
Packaging:
- 400g.
Rema Exakt 1000ml - The liquid is sensitive to low temperature - shipping in winter at the risk of the customer.
Rema Exakt mass liquid.
Attention:
- The fluid is frost sensitive.
Packaging :
- 1000 ml.
Rema Dynamic S 1000ml
Rema Dynamic S mixing liquid.
Attention:
- The fluid is sensitive to frost.
- Shipment of goods in winter at the customer's risk.
Packaging :
- 1000ml.
Rema Dynamic S investment material 500g
Rema Dynamic investment material in the technique of skeletal dentures.
Characteristics:
- Safe, fast and universal.
- Fast annealing of the rings.
- The rings are placed in an oven heated to 600 °C.
- Heats up to 850-900 °C within 40 minutes.
- It is perfect for combined and whole castings.
- Can be duplicated with agar and silicone.
Packaging:
- 500g.
Wirovest PLUS 400g BEGO
An investment material for skeletal dentures, which is an improved version of Wirovest. A characteristic feature of this mass is the extended time to start setting. Suitable for duplicating in agar and silicone. It is recommended to heat the Wirovest Plus mass using the conventional system. Regardless of the method of duplication and the way it is mixed, it guarantees perfect accuracy of fitting. It gives a very smooth surface of the models. To dissolve it, use Begosol liquid.
Technical data:
- Liquid: Begosol.
- processing time 3 min 15 sec;
- Linear thermal expansion 1.15% at 40% BegoSol;
- Total linear expansion approx. 2.3% at 40% BegoSol;
- Compressive strength approx. 15 N/mm²;
Packaging:
- Bag: 400g
Deguvest liquid 1350ml - Promotion of the Hits of the Month
Deguvest Impact mass liquid for the traditional mold heating process.
Attention:
- The fluid is sensitive to frost.
- Shipment of goods in winter at the customer's risk.
Package:
- 1350 ml.
Deguvest Impact 150g
Deguvest Impact - The universal investment for the technique of making crowns and bridges.
Characteristics; - Designed to work on all types of dental alloys. - Possibility to use a quick or traditional process of heating the mold. - High precision and surface quality of the cast object. - Easy casting release. - Free of gypsum and carbon.
Package:
- 150g.
Deguvest Specjal liquid 1350ml - Promotion
Deguvest Specjal liquid. Deguvest Impact mass liquid for a quick heating-up process.
Attention:
The fluid is sensitive to frost. Shipment of goods in winter at the customer's risk.
Package:
- 1350 ml.
Gilvest MG 400g
Gilvest MG investment material. Phosphate investment material for chromium-cobalt alloy castings for skeletal dentures.
Package:
400g.
Gilvest Liquid for investment material 1000ml - The liquid is sensitive to low temperature - shipping in winter at the risk of the customer.
Gilvest investment fluid for Gilvest MG, MG Speed, Gilvest HS and Gilvest ME investment.
Attention:
- The fluid is sensitive to frost.
Package:
- 1000 ml.
Gilvest HS 160g
Fast-setting investment for crowns and bridges. Use with GILVEST LIQUID.
Package:
- 160g
BegoForm weight 15x90g
BegoForm refractory post material for inlays, veneers and onlays. High edge strength posts, smooth and precise. Special ceramic masses of known manufacturers can be used for them.
Package:
- Set of 15 x 90g bags.
Ips PressVEST Premium Powder 100g
Product description:
- IPS PressVest Premium is a universal phosphate investment (type 1, class 1 and 2) that can be used with ceramic stamping materials in Ivoclar Vivadent furnaces.
- It can be used both in the speed heating procedure and in the conventional procedure.
"Speed" heat-up procedure:
- The ring is placed in a furnace heated to its final temperature and then transferred to a pressing furnace after a certain time.
Conventional annealing procedure:
- The ring is placed in a non-heated oven (room temperature) and heated to its final temperature as recommended. After the specified time, the ring is transferred to a pressing furnace.
Indications:
IPS Press VEST Premium can be used with the following pressing ceramics for the Ivoclar Vivadent furnaces
IPS e.max Press
- IPS e.max ZirPress
- IPS InLine PoM (Press- on Metal)
Storage:
- Store at 12-28 ° C
- Store the powder in a dry place
- Do not store the liquid at temperatures below +5 ° C (because of its sensitivity to low temperatures!). If the fluid freezes over, it becomes unusable due to crystallization.
Temperature at which the material can be used:
- Ambient temperature 18 ° C - max. 23 ° C.
- Temperature significantly deviating from this range may significantly affect the setting process.
- Lower ambient temperature slows down the chemical process.
- Higher ambient temperature accelerates the chemical process (from 23 - 28 ° C, the liquid with water can be cooled down to 12 ° C.
Mixing ratio:
By diluting the liquid, it is possible to control the expansion of the investment material, which influences the fit of the pressed restoration. The concentration of the liquid is expressed in%. Important: The ratio of the amount of mixed liquid (liquid to investment material + distilled water) depends on the amount of powder and must be strictly adhered to.
100 g of powder: 26 ml of liquid (investment liquid + distilled water)
- 200 g powder: 52 ml liquid (investment liquid + distilled water)
- 300 g of powder: 78 ml of liquid (investment fluid + distilled water)
The following information on fluid concentrations is only a guide and may be adjusted according to the work size and mixing conditions. Do not dilute the fluid below 50%!
Package:
-100g.
Ips PressVEST Premium Liquid 500 ml - The liquid is sensitive to low temperatures - shipping in winter at the customer's risk.
Fluid for IPS PressVest Premium investment.
Package:
- 500ml.
BegoSol K 1l- The fluid is sensitive to low temperatures - shipping in winter at the risk of the customer.
Liquid for mixing investment materials, WiroFine, BellaStar XL and BellaCer.
Package:
- 1 l.
Attention:
- The liquid is sensitive to frost - shipping in winter is at the customer's risk.
BegoSol HE 1l - The fluid is sensitive to low temperatures - shipping in winter at the risk of the customer.
BegoSol HE mixing fluid for the investment materials Bellavest SH and Belavest T.
Attention:
- The liquid is sensitive to frost - shipping in winter at the risk of the customer.
Package:
- 1l.
Bellavest SH 160g
Belavest SH quick or traditionally heated investment for precision casting of crowns and bridges. Also for pressed ceramics, precious and non-precious metals.
Characteristics:
- Very smooth casting surfaces.
- Does not contain graphite, bound with phosphorus.
- Cures with significant edge strength and releases easily.
Packaging:
- 160g
Gilvest MG Speed 400g
Phosphate investment material for castings of chromium-cobalt alloys for skeletal dentures - fast setting.
Packaging:
- 400g
WiroFine 400g
WiroFine universal, rapid investment for all denture and composite applications, for duplication in agar and silicone.
Characteristics:
- Conventional or rapid heating up to 1050 °C with ideal expansion
- Fast heating up to 1000 °C insertion temperature = final temperature.
- Accurate model surfaces, even when duplicating with agar, no curing is required when duplicating with silicone.
Packaging:
- 400g bag
IPS PressVEST Premium Liquid 1l. - The liquid is sensitive to low temperature - shipping in winter at the risk of the customer.
Fluid for IPS PressVest Premium investment
Package:
- 1l
SheraCast 2000 400g investment material
SHERACAST 2000
Investment material for frames:
- excellent quality
- for quick and slow heating
- for doubling with silicone
- high casting accuracy
- smooth surface of castings
- oxides bind to the mass when the casting is released
Packaging:
- 400g
SheraCast 400g investment material
SHERACAST
Investment material for frames:
- for quick and slow heating
- for doubling with silicone and agar
- high accuracy of castings
- smooth surface of castings
- the oxides bind to the mass as the casting is released
Package:
400 g
SheraFina 2000 160g investment material
SHERAFINA 2000
Refractory mass for crowns and bridges:
- perfect quality
- for injection porcelain
- for alloys of precious and non-precious metals
- easy expansion control
- for quick and slow heating
- very fine-grained and compact consistency
- smooth surface of castings
- very high accuracy of castings
Package:
- 160 g
SheraFina Rapid 160g investment material
SHERAFINA-RAPID
Investment material for crowns and bridges:
- for alloys of precious and non-precious metals
- easy expansion control
- for quick and slow heating
- very fine-grained and compact consistency
- smooth surface of castings
- very high accuracy of castings
Package:
160 g
Shera Liquid 1l investment material - The liquid is sensitive to low temperature - shipping in winter at the risk of the customer.
SHERALIQUID
Fluid for all SHERA investment materials
Package:
- 1l
Castorit Super C 40x150g weight + 1 l Liquid
Precision investment material for NiCr and CoCr alloys in the crown and bridge technique with phosphate for high shrinkage alloys.
Characteristics:
- Free of carbon and graphite.
- Very good consistency of the mixture.
- Smooth castings.
- Exact match.
- Controlled extension.
- Easy release of castings from casting rings.
- Thermal stability.
- Application time 4 min.
Package:
- 40 pcs x 150g + 1l liquid
Siladent Liquid for investment material type 100 1L
TYPE 100 - liquid for the investment materials from Siladent.
Package:
- 1000 ml
Gilvest HS 40x160g + Free Liquid - Hits of the Month Promotion
Quick-setting investment for crowns and bridges. Use with GILVEST LIQUID.
Packaging:
- 160g x 40 pcs + liquid
Gilvest MG 400g x 50sz + Free Liquid - Hits of the Month Promotion
Gilvest MG investment material. Phosphate investment material for chromium-cobalt alloy castings for skeletal dentures.
Package:
- 400g x 50pcs + 1l of liquid
WiroFine investment material 45x400g
WiroFine is a universal, fast investment material for all applications in partial dentures and combination work, for agar and silicone duplications.
Features:
- Conventional or fast heating up to 1050 ° C with perfect expansion
- Rapid heating up to 1000 ° C. Insertion temperature = final temperature.
- Exact model surfaces, even with agar duplication, no curing is required when duplicating with silicone.
Package:
- 400gx 45pcs (Carton)
Wirovest investment material 45x400 g
Phosphate bonded investment material for framework dentures. The smooth surfaces of the models facilitate modeling and ensure equally smooth surfaces of castings. Very high expansion and hardness of the models are obtained thanks to the use of the BegoSol mixing liquid.
Product Details:
- Onset of clotting (Vicat time) approx. 5 minutes
- Compressive strength 15 MPa
- Linear thermal expansion [%] 1.15%
- Working time at 20 °C approx. 3 minutes.
- Shelf life in unopened packaging 24 months
Packaging:
- 45 x 400g (Carton)
Bellavest SH investment material 80x160g
Belavest SH quick or traditionally heated investment for precision casting of crowns and bridges. Also for pressed ceramics, precious and non-precious metals.
Characteristics:
- Very smooth casting surfaces.
- Does not contain graphite, bound with phosphorus.
- Cures with significant edge strength and releases easily.
Packaging:
80x160g
Deguvest Impact 50x150g - cardboard box. PROMOTION Hits of the month
Deguvest Impact - The universal investment for the technique of making crowns and bridges.
Characteristics:
- Designed to work on all types of dental alloys.
- The possibility of using a quick or traditional process of heating the mold.
- High precision and surface quality of the cast object.
- Easy casting release.
- Free of gypsum and carbon.
Package:
- 50x150g
Castorit Super C 40x150g
Precision investment material for NiCr and CoCr alloys in crown and bridge technology containing phosphate for high-shrinkability alloys.
Characteristics:
- Contains no carbon or graphite.
- Very good consistency of the mixture.
- Smooth castings.
- Exact fit.
- Controlled expansion.
- Easy release of castings from casting rings.
- Thermal stability.
- Application time 4 min.
Packaging:
- 40x150g (cardboard)
Rema Exakt weight 50x400 g
Rema Exakt. Quick-setting investment material for partial dentures, for making models and casting rings. The obtained castings adhere precisely to the working models.
**Physical data at room temperature and with 100% mixing and mixing liquid:*
- Processing time 3 min 45 sec.
- Flow properties: 110-120 mm.
- Thermal expansion: 1.00%.
- Compressive strength: 12-15 MPa.
- Preheating temperature: 950-1000 °C.
Packaging:
- 40x500g (Carton)
Bellavest DR 160g
BEGO Bellavest DR - new, precise shock-heat investment with reduced dusting for crowns and bridges.
Investment material with reduced dusting for fast and conventional heating in the fabrication of crowns and bridges:
- reduced by about 80% dust formation during work has a positive effect on the improvement of health protection,
- shock-heating up to 900 ° C or conventional heating means flexibility in a modern dental laboratory,
- very good flow parameters and extended working time up to 5 minutes improve the comfort of work for the user,
- creamy consistency leads to very smooth surfaces of cast objects with perfect reproduction of the smallest details,
- constant, high quality and optimal expansion control lead to high precision and accuracy in all indications,
- after setting, it offers high edge strength and leads to the correct casting of the smallest details,
- good technical parameters of the mass emphasize its universal character and save time and material.
Fine dust reduction:
- Bellavest DR is the perfect material for the fabrication of crowns and bridges for those dental technicians who place great emphasis on health care in their laboratory. Contrary to conventional phosphate mixes, Bellavest DR produces approximately 80% less harmful quartz dust!
Fast or conventional heating:
- Bellavest DR is intended for technicians who use both methods - conventional or quick heating method. It also does not matter whether the work will be made of precious or non-precious metal alloys.
Easy processing and high security:
Bellavest DR is extremely fine-grained and has excellent flow properties. Despite its high marginal strength, it allows easy release of cast objects. The mass is prepared together with the BegoSol HE liquid in a mixer using a vacuum. At an ambient temperature of 20 ° C, the technician has approximately 5 minutes to freely fill even several rings in one cycle with the mass.
Very smooth and extremely accurate
Bellavest DR is a phosphate paste, free of graphite, which due to its excellent parameters and high accuracy is recommended for a variety of applications:
- safe application thanks to maintaining constant quality in production batches,
- free choice of working method - fast or conventional - affects the necessary freedom of work in the laboratory,
- precise fit thanks to very smooth surfaces and expansion control,
- ergonomic thanks to the wide applicability and the use of only one liquid for the preparation of the mass.
Package:
- 160 g
Gilvest MG Speed 50x400g + 1 liter of liquid for free! - Hits of the Month Promotion
Phosphate investment material for chromium-cobalt alloy castings for skeletal dentures - fast setting.
Package:
- 50x400g + 1l liquid
Silavest Press 100g
Phosphate-bound, graphite-free, precision investment for all ceramic systems and high-speed pressed ceramics. Silavest Press can be used with ceramics pressed against metal and zircons.
Benefits:
- perfect match
- very smooth surface
- a fine-grained mass with a creamy consistency
- for all press ceramics systems
- easy released
- should be used with SILADENT type 100 expansion fluid.
Package:
- 100g
Hinrivest RP investment material for 3D printing 400g Promotion
Extremely precise phosphate investment, without graphite, Hinrivest RP was specially developed for casting printed skeletal dentures (rapid prototyping) and milled wax and resin parts in other printed works.
Benefits:
- Super fine structure.
- Creamy texture.
- Perfect match.
- Very smooth casting surface.
the manual for the product can be found under the photo of the product - click the PDF icon
Packaging: - 400 g
Hinrivest RP liquid for investment material 3D 1L Promotion
- Hinrivest RP liquid for 3D investment
Package:
- 1 l
Hinrivest RP (50x400g) investment mass + liquid for mass 1L. Promotion
Extremely precise phosphate investment, without graphite, Hinrivest RP was specially developed for casting printed skeletal dentures (rapid prototyping) and milled wax and resin parts in other printed works.
Benefits:
- super fine structure,
- creamy texture
- perfect match,
- very smooth casting surface
the instructions for the product can be found under the product photo - click the PDF icon Packaging:
50x400 g + 1000 ml liquid
GC LiSi PRESS VEST liquid 900 ml - Liquid sensitive to low temperature - shipping in winter at the customer's risk.
GC LiSi PressVest - liquid. Low temperature sensitive liquid - shipping in winter at the customer's risk.
Package:
- 900 ml.
GC LiSi PRESS VEST POWDER 60x100g
Phosphate investment material used in the press ceramics technique. For the quick heating process.
Package:
60x100 g
GC Stellavest 8kg (4x2kg) phosphate investment
Graphite-free phosphate investment for a fast and controlled heating process for non-precious metals. Especially recommended for a quick heating process without rings.
Package:
2x4kg