What are plaster settlers for?
Generally, clarifiers are also called sedimentation tanks and are used to precipitate gypsum or investment masses from the water during model treatment. Thanks to the tight and closed casing and the chamber cleaning system, the settling tank prevents clogging of the sewage system and the release of unpleasant odors.
EU regulations oblige all renovated and newly established dental technology laboratories to install filtering devices for heavy waste, such as gypsum and investment materials.
Plaster sedimentation tank with compartments.
- Partitions enable any connection of the settling tank to the sewage system.
- It is only necessary to remember about the cascade principle (water overflowing into successive and lower chambers) for the device to fulfill its function.
After the partitions are properly set, the settling tank should be tightly closed.
Effectively protects the sewage system against all waste heavier than water, such as gypsum, investment compounds, etc.
Necessary. EU regulations oblige all renovated and newly built dental technology laboratories to install devices that filter heavy waste, such as gypsum, investment materials, etc. We attach a certificate of compliance needed for Sanepid.
- four overflow chambers
- tight closure
- standard '50 connections
- full freedom of setting the inlet and outlet pipes
- operation and assembly instructions
- soft plastic dividers for easy cleaning
- CE certificate for Sanepid
- very easy to clean
- resistant to low and high temperatures
- 5 years warranty
- height 32 cm
- height of the filling pipe connection 38 cm
- diameter 32 cm
- height of the spout pipe 18 cm from the base
- 20l bucket.
Gypsum decanter (gypsum settling tank), preventing gypsum from entering the sewage system. Made of stainless steel. With a plastic lid to prevent odors.
- height 290mm
- width 450mm
- length 230mm
- Weight 6.5 kg
- Capacity: 18 liters
Clogging tank 26 l It is used to precipitate gypsum or protective masses from water during model processing, thanks to a sealed, closed, four-chamber cleaning system, it prevents clogging of the sewage system and the release of unpleasant odors. Four-stage sequential settler with a handle. Due to the EU regulations and requirements, it is mandatory to install such devices in all renovated and newly established prosthetic laboratories. The clarifier has an assembly and operating manual and a full certificate of compliance required by Sanepid.
dimensions (diameter x height): 330x400mm max. dimensions with installed hydraulic couplings (horizontal x vertical): 550x480mm height of water drain from the base: 250 mm