Pins No. 1 without Edent needle 100pcs.
Brass pins for the dental laboratory, made of the highest quality brass. Without needle No. 1 small.
- Length 21mm
Packaging :
- 100pcs
Retention of split models 500 pieces
Retentions of split models.
- Elements connecting plaster layers in split models.
- They provide a very good connection.
- They don't drown.
- They can be easily cut without damaging the saw blades.
Packaging :
- 500 pcs.
BI-Pin without needle 13.5 mm 100pcs
13.5mm BI-Pins. A nickel-plated double-guided pin for secure and non-rotating mounting of the post. Precise fit with slight friction between pin and sleeve. It does not oxidize even after a long time.
Renfert catalog number 3261000
Technical data:
- Pin length - 13.5mm.
- Head length - 5.5mm.
- Head diameter - 2.0mm.
- Max. width of the sleeve - 3.6mm.
Packaging:
- 100 pcs pin+100 pcs tee
Bi-Pin 1.98mm x 2.35mm micromotor drill bit
Bi-Pin and Bi-V-Pin drill for micromotor.
- Appropriate drilling depth thanks to the use of a stop on the drill bit.
- Drill shaft diameter 2.35 mm (for micromotor).
Packaging:
- 1 piece.
17.5mm Bi-Pin without a needle
Nickel plated pin with double guiding for secure and non-rotational seating of the post. Precise fit with light friction between pin and sleeve. It does not oxidize even after a long time.
Technical data:
- pin length - 17.5mm
- head length - 5.5mm
- head diameter - 2.0mm
- max width of the T-shirt - 3.6mm
Package:
100 pins + 100 sleeves
Bi-Pin erasers 500 pcs
Rubber caps that can be fitted to all Renfert Bi-Pin pins. They prevent damage to the pins during basic grinding of the models. Thanks to this, high precision of the model is ensured.
Package:
10op
Smart-Pin Pin drill bit 1.59 mm x 3.0mm
Order No. 3670159
Description:
- Smart-Pin and Profix drill bit for pin saw.
- For all pins with a head diameter of 1.6mm
- Drill shank diameter 3,0mm (for pin saw)
- Drilling depth 10.5 mm
Packaging:
- 1 piece.
Bi-Pin Drill 2.0mmx3.0mm for pinch
Order No. 50100200
Description:
- Stepped drill bit for pin saw, for Bi-Pin and Bi-V-Pin pins
- For all pins with a head diameter of 2.0mm
- Drill shank diameter 3,0mm (for pin saw)
- Drilling depth 5.8mm
Package :
- 1 piece.
Bi-V-Pin with a plastic sleeve 100 pcs Promotion IDS 2023
Bi-V-Pin with a plastic sleeve. Thanks to the V-profile, it is possible to use these pins even in the case of teeth standing close to each other. By using Bi-V-Pin you can make very flat and neat primary bases. This leaves plenty of room for the secondary base to be made and fixed in the articulator.
Technical data:
- pin length - 12.5mm
- head length - 5.5mm
- head diameter - 2.0mm
- max. width of the sleeve - 3.8mm
Packaging:
- Pins 100 pcs.
- T-shirts 100 pcs.
Smart-pin with a plastic sleeve 100 pcs
Smart-pin pins with a plastic sleeve.
Pin features:
- plastic sheath reduces the resistance to setting
- perfect fixation in the plaster base
Technical data:
- pin length 16.2 mm
- head diameter 1.6mm
Package:
100 pcs
PFO-FIX pins, pack / 100 pcs - precise pins
Pro-Fix - Precise pins with a plastic sleeve
Features:
- gentle, stress-free removal of the pins by smoothly releasing them from the base
- removing from the model without major stresses
- short friction path approx. 1 mm
- resistant to moisture, temperature and abrasion
- wide contact area of the pins
Technical data:
- pin length - 11.6mm
- head length - 5.5mm
- head diameter - 1.6mm
- pin length + shirt - 12.0mm
- T-shirt diameter - 3.0mm
- max pin diameter - 2.5mm
Package:
100 pcs
K-snap Picodent pins 100 pcs
1.6mm K-snap pins This pin system, consisting of cylindrical stepped pins and a plastic sleeve, combines the advantages of tapered systems with parallel systems for the first time.
Package:
100 pcs of pins and 100 pcs of sleeves
Pro-Fix pins with a plastic sleeve 1000pcs Promotion
Pro-Fix - Precise pins with a plastic sleeve
Features:
- gentle, stress-free removal of the pins by smoothly releasing them from the base
- removing from the model without major stresses
- short friction path approx. 1 mm
- resistant to moisture, temperature and abrasion
- wide contact area of the pins
Technical data:
- pin length - 11.6mm
- head length - 5.5mm
- head diameter - 1.6mm
- pin length + shirt - 12.0mm
- T-shirt diameter - 3.0mm
- max pin diameter - 2.5mm
Package:
1000 pcs of pins + 1000 pcs of sleeves
Bi-Pins without needle short 13.5mm 1000pcs Promotion IDS 2023
13.5mm BI-Pins. A nickel-plated double-guided pin for secure and non-rotating mounting of the post. Precise fit with slight friction between pin and sleeve. It does not oxidize even after a long time.
Renfert catalog number 3262000
Technical data:
- pin length - 13.5mm
- head length - 5.5mm
- head diameter - 2.0mm
- max. width of the sleeve - 3.6mm
Packaging:
- 1000pcs pins+1000pcs shirt
DIVARIO pins 14 mm 1000 pcs
Pins for making models compatible with DIVARIO, Zeiser, Giroform.
Package:
- 1000 pcs
Smart-Pin 1000 pcs - Renfert
Attention:
- T-shirts can be purchased separately code mikran 10268
Smart pins - a narrow and short pin with optimal guidance in a metal jacket.
Advantages:
- extremely narrow pin / jersey combination
- ideal for very confined spaces
- the height of the pin adapted to the very low base of the model allows you to save plaster.
Technical data:
- pin length - 12.5mm
- head length - 5.5mm
- head diameter - 1.6mm
- T-shirt diameter - 2.5mm
- max. pin diameter - 2.0mm
Package:
1000 pcs
Smart - Pin T-shirt 1000 pcs Renfert
Smart -Pin sleeve for Renfert smart pins, micran pin code 10267
Package:
1000 pcs
Bi-V-Pin with a metal sleeve1000pcs/pack IDS 2023 promotion
Bi-V-Pin with metal jacket. Thanks to the V-profile, it is possible to use these pins even in the case of teeth standing close to each other. By using Bi-V-Pin you can make very flat and neat primary bases. This leaves plenty of room for the secondary base to be made and fixed in the articulator.
Technical data:
- pin length - 12.5mm
- head length - 5.5mm
- head diameter - 2.0mm
- max. width of the sleeve - 3.6mm
Packaging:
- Pins 1000 pcs.
- T-shirts 1000 pcs.
Bi-V-Pins with plastic sleeve / 1000 pcs
Bi-V-Pin with a plastic sleeve. Thanks to the V-profile, it is possible to use these pins even in the case of teeth standing close to each other. By using Bi-V-Pin you can make very flat and neat primary bases. This leaves plenty of room for the secondary base to be made and fixed in the articulator.
Renfert catalog number 3292000
Technical data:
- pin length - 12.5mm
- head length - 5.5mm
- head diameter - 2.0mm
- max. width of the sleeve - 3.8mm
Packaging:
- Pins 1000 pcs.
- T-shirts 1000 pcs.
Bi V Pin with metal sleeve 100 pcs
Bi-V-Pin with metal jacket. Thanks to the V-profile, it is possible to use these pins even in the case of teeth standing close to each other. By using Bi-V-Pin you can make very flat and neat primary bases. This leaves plenty of room for the secondary base to be made and fixed in the articulator.
Technical data:
- pin length - 12.5mm
- head length - 5.5mm
- head diameter - 2.0mm
- max. width of the sleeve - 3.6mm
Packaging:
- Pins 100 pcs.
- T-shirts 100 pcs.
Bi-Pin 17.5 mm with a needle 100 pcs.
Pin with two guide pins and needle for positioning in impressions.
Advantages:
- does not require drilling the model
- the long setting pin helps to position the pin correctly in the impression
- the conical shape of the pins allows their easy removal
Technical data:
- pin length - 17.5mm
- head length - 4.0mm
- head diameter - 1.9mm
- needle length - 8.0mm
- max pin width - 2.9mm
Package:
Pins 100 pcs. T-shirts 100 pcs.
AUTOspin pins 1000 pcs.
AUTOspin pins.
14mm conical pins for AUTOspin, Giroform, Zeiser or other split model systems.
Package:
1000 pcs
Pins for the system of split models 14mm / 1000 pcs Promotion
Pins for 1.4mm split model system. Suitable for Zeiser, AG, Auto-Spin systems
Package :
1000 pcs.
Bi-Pin 17.5 mm without a needle 1000 pcs
Nickel plated pin with double guiding for secure and non-rotational seating of the post. Precise fit with light friction between pin and sleeve. It does not oxidize even after a long time.
Technical data:
- pin length - 17.5mm
- head length - 5.5mm
- head diameter - 2.0mm
- max width of the T-shirt - 3.6mm
Package:
1000pcs pins + 1000pcs sleeves.