A set of drills and erasers for milling 0 degrees

Package:

1 set contains 12 cutters and 6 rubbers

1.95mmx 3.0mm pin drill bit

Package:

1 piece

Separate liquid for acrylic-gypsum and gypsum-gypsum insulation. Preparation for technical and dental works. It is designed to isolate the surface of plaster molds from acrylic dough for dentures, veneers for crowns, crowns and other prosthetic works. Creates the appropriate thickness of an insulating membrane depending on the type. The individual types differ in color.

Features:

• The pink separate can be used universally.
• Slow-drying blue separate absorbed by gypsum recommended in pressure techniques, holds well, does not come off.

Package:

1000 ml.

Ceramic palette for dyes 12 holes.

Package:

1 piece

Brush-cloth for polishing

Features:

• Diameter 125x10mm.
• Soft.
• The hub is made of plastic.

Package:

• 1 piece.

A cloth for a polisher for high-gloss polishing of metal, acrylic. Diameter 155mm.

Package:

1 piece.

Nickel plated pin with double guiding for secure and non-rotational seating of the post. Precise fit with light friction between pin and sleeve. It does not oxidize even after a long time.

Technical data:

• pin length - 17.5mm
• head length - 5.5mm
• head diameter - 2.0mm
• max width of the T-shirt - 3.6mm

Package:

100 pins + 100 sleeves

Medium-hard green wax wire for foundry channels 2.5mm thick.

Features:

• Easy to form, does not bend and burns without residue.
• High resistance to deformation and compression during forming.

Package :

Roll of 250g (about 50m).

Steel wire brush 0.08 mm, mounted on the mandrel, diameter 21 mm.

Package:

• 1 piece.

Leather brush, diameter 25mm. On the handpiece.

Package:

1 piece.

2mm garter type mouldable fibers.

Application:

1. Support for permanent composite restorations such as crowns, bridges, inlays, onlays
2. Splinting loose teeth
3. Orthodontic retainers
4. Individual crown-root inlays

Instructions for use:

1. Prepare teeth in accordance with applicable rules.
2. In the indirect method, isolate the teeth with petroleum jelly / silicone or make an impression and model of sharp contour plaster.
3. In the indirect method, not recommended, etch and cover the teeth with a bonding system, protect the gum with foil.

Fiber Fixing:

1. Simple bending: Remove the orange cover, press the entire fiber to the composite through the transparent cover, irradiate with 5 mm sections
2. Complicated course. Release the fiber from both sheaths with 3-5 mm sections, holding the orange sheath towards the light, expose
   ...

Stainless steel multi-section screw according to Bertoni.

Features:

• With three independent sections.
• For Y plates
• Reinforced guides.
• 4mm travel in each segment.

Package:

1 piece

BERTONI'S THREE-DIRECTIONAL ANATOMICAL SCREW.

Package:

• 1 piece.

Teardrop-shaped sublingual profile 3.3x1.7mm.

Package:

50g / pack

Suction hose, 3 m (plus 2 end fittings)

Renfert catalog number 900034240

Package:

1 set

3mm garter type mouldable fibers.

Application:

1. Support for permanent composite restorations such as crowns, bridges, inlays, onlays
2. Splinting loose teeth
3. Orthodontic retainers
4. Individual crown-root inlays

Instructions for use:

1. Prepare teeth in accordance with applicable rules.
2. In the indirect method, isolate the teeth with petroleum jelly / silicone or make an impression and model of sharp contour plaster.
3. In the indirect method, not recommended, etch and cover the teeth with a bonding system, protect the gum with foil.

Fiber Fixing:

1. Simple bending: Remove the orange cover, press the entire fiber to the composite through the transparent cover, irradiate with 5 mm sections
2. Complicated course. Release the fiber from both sheaths with 3-5 mm sections, holding the orange sheath towards the light, expose
   ...

4 All stop niklowo-chromowy pod ceramikę.

Cechy:

• Biały kolor
• Zgodność ze skaleniowymi i niskotopliwymi materiałami ceramicznymi.
• Łatwe odlewanie i obróbka.
• Zredukowana twardość.
• Biozgodność z tkankami.

Wskazania:

• Pojedyncze korony.
• Korony teleskopowe i stożkowe.
• Mosty z krótkimi i długimi przęsłami.
• Wkłady koronowo- korzeniowe.

Skład:

• Ni 61.4%.
• Cr 25.7%.
• Mo 11.0%.
• Si 1.5%.
• Mn<1.0,Al<1.0% .

Dane techniczne:

• Gęstość ( g/cm3) - 8,4.
• Zakres temperatury topnienia (°C ) - 1260- 1350.
• Współczynnik liniowej rozszerzalności cieplnej 25- 500(x10- 6/°C ) - 13,8, 20- 600(x 10- 6/°C ) - 14,1.
• Wydłużenie ( % ) - 12,0.
• Twardość w skali Vickersa - 235.
• Granica plastyczno
  ...

4 All stop niklowo-chromowy pod ceramikę.

Cechy:

• Biały kolor
• Zgodność ze skaleniowymi i niskotopliwymi materiałami ceramicznymi.
• Łatwe odlewanie i obróbka.
• Zredukowana twardość.
• Biozgodność z tkankami.

Wskazania:

• Pojedyncze korony.
• Korony teleskopowe i stożkowe.
• Mosty z krótkimi i długimi przęsłami.
• Wkłady koronowo- korzeniowe.

Skład:

• Ni 61.4%.
• Cr 25.7%.
• Mo 11.0%.
• Si 1.5%.
• Mn<1.0,Al<1.0% .

Dane techniczne:

• Gęstość ( g/cm3) - 8,4.
• Zakres temperatury topnienia (°C ) - 1260- 1350.
• Współczynnik liniowej rozszerzalności cieplnej 25- 500(x10- 6/°C ) - 13,8, 20- 600(x 10- 6/°C ) - 14,1.
• Wydłużenie ( % ) - 12,0.
• Twardość w skali Vickersa - 235.
• Granica plastyczno
  ...

Wax wire for foundry channels, green 4.0mm.

Features:

• Easy to form, does not bend and burns without residue.
• High resistance to deformation and compression during forming.
• Medium-hard

Package:

Roll of 250g. (approx. 21m)

Sublingual arches for the lower jaw.

Features:

• Teardrop shape.
• Size 4.0 x 1.7mm.

Package:

65g / pack

Sublingual wax arches for the lower jaw

Features:

• Teardrop shape.
• 4.0x2.0mm.

Package :

65g / pack

Dye palette small 6 holes.

Package:

1 piece

Shield reinforced with a polisher:

• diameter 64mm.

Package:

1 piece.

Abrasive metal strip. Width 6mm, length 13.5 cm.

Package:

12 pcs.

Reverse cone type diamond drill bit.

Package:

1 piece.

Cotton brush soft, delicate. 80mm diameter.

Package:

• 1 piece.

Diamond cone drill bit with rounded tip.

Package:

1 piece.

Abrasive metal strip. Width 8mm, length 13.5 cm.

Package:

12 pcs.

Adams buckles mesial - distal 9.0mm.

Features:

• Wire 0.7mm / 28.
• Hardness class sprung - hard 1800-2000 MPa.

Package:

10 pcs.

9m suction hose

Renfert catalog number 902 150 823

Package:

1 piece.

Abrasive metal strips. Width 4mm, length 13.5 cm.

Package:

12 pcs.

Plastic model duplicating box.

Package:

1 piece

A colorful handle for winding the modeler's tip. Reversible.

Attention:

• Numbers for selecting tips to be screwed onto the handle

• 8690

• 8695

Package:

• 1 piece.

A knife for silicone masses.

Package:

1 piece.

Silicone glass size XS 5ml.

Package:

1 piece.

Polishing brush with a diameter of 21mm. Soft goat hair on the handle.

Package:

• 1 piece.

Rack G for firing porcelain bridges, with pins.

Package:

2pcs + 20 sticks

Klej zapewniający chemiczne połączenie acetalu z akrylem. Wzmacnia i poprawia utrzymanie siodeł akrylowych w protezach szkieletowych z acetalu. Zapobiega odchodzeniu (odstawaniu) akrylu od powierzchni acetalu i gromadzeniu resztek pokarmowych w protezie.

Opakowanie:

• 1 szt

Adams buckles mesial - distal 8.0 mm.

Features:

• Wire 0.7 mm / 28.
• Hardness class: elastic - hard 1800- 2000 MPa.

Package:

10 pcs.

Adams buckles mesio-distal 10.0 mm.

Features:

• Wire 0.7mm / 28.
• Hardness class sprung - hard 1800-2000 MPa.

Package:

10 pcs.

Adams buckles mesial - distal 11.0mm.

Features:

• Wire 0.7 mm / 28.
• Hardness class sprung - hard 1800-2000 MPa.

Package:

10 pcs.

Adams buckles mesial - distal 12.0mm.

Features:

• Wire 0.7mm / 28.
• Hardness class sprung - hard 1800-2000 MPa.

Package:

10 pcs.

Adams buckles mesial - distal 7.0 mm.

Features:

• Wire 0.7mm / 28.
• Hardness class sprung - hard 1800-2000 MPa.

Package:

10 pcs.

External ventilation adapter.

Renfert Order No. 29210004

Package:

1 piece

Adapter glass with moldy.

Package:

1 piece.

A material that improves the adhesion of the silicone impression material to the tray. Universal Tray Adhesive for use on all types of spoons.

Package:

10 ml.

Adson Micro Tweezers.

Package:

1 piece.

Agar Castogel to specjalna masa do powielania przeznaczona do wykonywania precyzyjnych protez szkieletowych i prac kombinowanych.

Cechy:

• Wysoka dokładność odwzorowania nawet najmniejszych szczegółów.
• Wytrzymała na rozerwanie forma do powielania.
• Wyjątkowa elastyczność.
• Bardzo wysoka trwałość, przy jednorazowym w ciągu dnia podgrzewaniu nadaje się do użytku przez około 4 tygodnie.

Opakowanie:

• 6kg.

Agar Gelon is a special duplicating material designed for the fabrication of precision partial dentures and combination work and dentures using the infusion method.

It melts very well in the microwave!

Colour:

• green

Package:

6kg.