Vertex Orthoplast coloring fluids 250ml
Vertex Orthoplast fluid.
For making colored cold orthodontic appliances.
Characteristics:
- available in a wide range of colors (9 colors + colorless).
Packaging:
- 250ml
Vertex Orthoplast polymer color transparent 500 g
Vertex Orthoplast - self-polymerizing acrylic material for the production of orthodontic appliances.
Characteristics:
- colorless;
- a wide range of liquid dyes (9 colors + colorless) with a capacity of 250 ml are available for mixing;
- for the production of orthodontic appliances using the dough technique and the pouring technique.
Technical specifications:
- dough phase 9 minutes;
- working time 6 minutes;
- curing time 20 minutes at 55°C and 2.5 bar;
- mixing ratio by volume / parts by weight 1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer);
- bending strength ≥ 50 MPa;
- modulus of elasticity in bending ≥ 1500 MPa;
- water sorption ≤ 32 μg/mm³;
- solubility≤ 5.0 μg/mm³.
Packaging:
- 500g
Orthocryl monomer 500ml
Orthocryl acrylic liquid, for making orthodontic appliances.
Characteristics:
- color colorless;
- cold polymerizing.
Packaging:
- 500ml
Orthocryl glitter 50g
Orthocryl Glitters.
For staining removable orthodontic appliances.
Characteristics:
- Glitter is added to the powder depending on the desired color intensity;
- Adding glitter does not change how you use acrylic;
- the appliances are easy to process and polish;
- colors; iridescent, red, blue, silver, gold, pearl.
Packaging:
- 50g
Orthocryl EQ 1000g
Orthocryl EQ powder.
Self-polymer with long service life.
Characteristics:
- for making acrylic plates in orthodontics;
- used both in the "salt and pepper" technique and in modeling (kneading dough);
- transparent color.
Packaging:
- 1000g
Orthocryl concentrate red 100ml
Red color concentrate.
- For tinting transparent Orthocryl liquid.
Packaging:
- 100ml
Orthocryl concentrate blue 100ml
Blue color concentrate.
- For tinting transparent Orthocryl liquid.
Packaging:
- 100ml
Vertex Orthoplast polymer color 22 1000g
Vertex Orthoplast - self-polymerizing acrylic material for the production of orthodontic appliances.
Characteristics:
- color colorless;
- a wide range of liquid dyes (9 colors + colorless) with a capacity of 250 ml are available for mixing;
- for the production of orthodontic appliances using the dough technique and the pouring technique.
Technical specifications:
- dough phase 9 minutes;
- working time 6 minutes;
- curing time 20 minutes at 55°C and 2.5 bar;
- mixing ratio by volume / parts by weight 1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer);
- bending strength ≥ 50 MPa;
- modulus of elasticity in bending ≥ 1500 MPa;
- water sorption ≤ 32 μg/mm³;
- solubility≤ 5.0 μg/mm³.
Packaging:
- 1000g
Villacryl Ortho 500g/250ml
Villacryl Ortho is a polymethacrylate material intended for the production of removable orthodontic appliances by pouring powder onto a model.
Characteristics:
- complies with international standards ISO 1567; Type II, Class I;
- the product has the CE mark for compliance with the MDD 93/42/EEC directive.
Advantages:
- easy to prepare and process;
- the monomer-saturated polymer does not flow down the palatal slopes;
- simple and effective method of hardening;
- makes it possible to obtain any color at any intensity;
- ensures the patient's comfort of use;
- Braces made using Villacryl Ortho have high aesthetic values and colour stability;
- does not contain heavy metals;
- biologically neutral.
Technical data:
- gelation time 1 min.;
- polymerization process 20 min at 40-50°C and 2 bar pressure;
- fracture strength 66.2 MPa [min. 60 MPa];
- solubility 3.7 µg/mm3 [max. 6 µg/mm3];
- sorption 10.4 µg/mm3 [max. 32 µg/mm3].
Packaging:
- 500 g powder;
- 250 ml of liquid;
- 3 colour concentrates of 15 ml each.
Vertex Orthoplast 22 4000g
Vertex Orthoplast - self-polymerizing acrylic material for the production of orthodontic appliances.
Characteristics:
- color colorless;
- a wide range of liquid dyes (9 colors + colorless) with a capacity of 250 ml are available for mixing;
- for the production of orthodontic appliances using the dough technique and the pouring technique.
Technical specifications:
- dough phase 9 minutes;
- working time 6 minutes;
- curing time 20 minutes at 55°C and 2.5 bar;
- mixing ratio by volume / parts by weight 1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer);
- bending strength ≥ 50 MPa;
- modulus of elasticity in bending ≥ 1500 MPa;
- water sorption ≤ 32 μg/mm³;
- solubility≤ 5.0 μg/mm³.
Packaging:
- 4000g
Estetic Ort set 500g/250ml
Estetic Ort, a material for making orthodontic appliance plates.
Characteristics:
- colorless;
- work using the plastic mass application method;
- pouring powder onto the model and soaking it with monomer ("salt and pepper");
- easily colored with Estetic Ort color liquid dyes;
- meets the requirements of the PN-EN ISO 20795-2 standard.
Technical data:
- mixing proportions: by weight powder/liquid - 3:1;
- dough preparation time: 2-5 min;
- Dough shelf life: 2.5 min;
- polymerization process: 20 min., 40-50°C; 2 bar;
- fracture strength: 66.5 MPa;
- bending elasticity: 2043 MPa;
- solubility: 2.6 μg/mm³;
- sorption: 12.0 μg/mm³.
Packaging:
- 500g + 250ml
Estetic Ort liquid 250ml
Estetic Ort cold acrylic liquid for making orthodontic appliances.
- Colour: colourless.
Packaging:
- 250ml
Estetic Ort color concentrates
Estetic Ort colour concentrates.
Characteristics:
- concentrates for dyeing materials used to make orthodontic appliance plates;
- colors: orange, red, yellow, blue.
Packaging:
- 4x12.5ml
Villacryl Ortho color concentrate 50ml
Color concentrates for Villacryl Ortho allow you to obtain any color of orthodontic appliance.
Characteristics:
- 8 colors, allows you to obtain intermediate colors;
- the use of colour concentrates allows you to individually create colours of any saturation;
- Braces made with Villacryl Ortho, using various colour concentrates, have high aesthetic values and colour stability.
Packaging:
- 50ml.
Villacryl Ortho monomer 250ml
Villacryl Ortho liquid for cold orthodontic braces.
- Colour: colourless.
Packaging:
- 250ml
Vertex Orthoplast 922 1000ml
Vertex Orthoplast cold liquid for making orthodontic appliances.
- colorless color
Packaging:
- 1 liter
Villacryl Ortho powder colorless 500g
Villacryl Ortho is a colorless acrylic material for low-temperature pressure polymerization intended for the production of removable orthodontic appliances by pouring powder onto the model and impregnating it with monomer (salt & pepper method), as well as for the repair of orthodontic appliances.
Advantages:
- the ability to individually create colors of any saturation;
- economical, just add dye to obtain a variety of colors;
- low absorption of fluids from the oral cavity;
- biologically neutral;
- thanks to the rapid gelation of the mass, it does not flow from the plaster model;
- perfect transparency of the acrylic mass;
- easy to prepare and process;
- solubility < 5* µg/mm³.
Technical data:
- polymerization process 20 min. 50-60 °C 2 bar;
- fracture strength > 50* MPa;
- sorption < 32* µg/mm³.
Packaging:
- 500g
Estetic Ort liquid 1000ml
Estetic Ort cold liquid for orthodontic braces.
- Colourless.
Packaging:
- 1000 ml
Estetic Ort powder 500g
Estetic Ort, a material for making orthodontic appliance plates.
Characteristics:
- color colorless;
- work using the plastic mass application method;
- pouring powder onto the model and soaking it with monomer ("salt and pepper");
- easily colored with Estetic Ort Kolor liquid dyes;
- meets the requirements of the PN-EN ISO 20795-2 standard.
Technical data:
- mixing proportions: by weight powder/liquid - 3:1;
- dough preparation time: 2-5 min;
- Dough shelf life: 2.5 min;
- polymerization process: 20 min., 40-50°C; 2 bar;
- fracture strength: 66.5 MPa;
- bending elasticity: 2043 MPa;
- solubility: 2.6 μg/mm³;
- sorption: 12.0 μg/mm³.
Packaging:
- 500g
Estetic Ort powder 2000 g
Estetic Ort, a material for making orthodontic appliance plates.
Characteristics:
- color colorless;
- work using the plastic mass application method;
- pouring powder onto the model and soaking it with monomer ("salt and pepper");
- easily colored with Estetic Ort Kolor liquid dyes;
- meets the requirements of the PN-EN ISO 20795-2 standard.
Technical data:
- mixing proportions: by weight powder/liquid - 3:1;
- dough preparation time: 2-5 min;
- Dough shelf life: 2.5 min;
- polymerization process: 20 min., 40-50°C; 2 bar;
- fracture strength: 66.5 MPa;
- bending elasticity: 2043 MPa;
- solubility: 2.6 μg/mm³;
- sorption: 12.0 μg/mm³.
Packaging:
- 2000g
Villacryl Ortho colorless polymer 4kg
Villacryl Ortho is a colorless acrylic material for low-temperature pressure polymerization intended for the production of removable orthodontic appliances by pouring powder onto the model and impregnating it with monomer (salt & pepper method) as well as for the repair of orthodontic appliances.
Advantages:
- the ability to individually create colors of any saturation;
- economical, just add dye to obtain a variety of colors;
- low absorption of fluids from the oral cavity;
- biologically neutral;
- thanks to the rapid gelation of the mass, it does not flow from the plaster model;
- perfect transparency of the acrylic mass;
- easy to prepare and process;
- solubility < 5* µg/mm³.
Technical data:
- polymerization process 20 min. 50-60 °C 2 bar;
- fracture strength > 50* MPa;
- sorption < 32* µg/mm³.
Packaging:
- 4000g
Villacryl Ortho monomer 1L
Villacryl Ortho liquid for cold orthodontic braces.
- Colour: colourless.
Packaging:
- 1000ml
Villacryl Ortho monomer 500ml
Villacryl Ortho liquid for cold orthodontic braces.
- Colour: colourless.
Packaging:
- 500ml
Orthocryl liquid colorless 1000 ml
Orthocryl liquid.
- Self-polymerizing, colorless liquid for making orthodontic appliances.
Packaging:
- 1000ml.
Orthocryl powder black (black) 200g
Powder (polymer), opaque, black.
Cold-cured acrylic resin with a wide working range for efficient production of orthodontic appliances.
Characteristics:
- black color;
- optimal stability using the "salt and pepper" technique;
- also suitable for the cake technique.
Packaging:
- 200g
Orthocryl powder white (white)200g
Powder (polymer), opaque, white.
Cold-cured acrylic resin with a wide working range for efficient production of orthodontic appliances.
Advantages:
- optimal stability using the "salt and pepper" technique;
- also suitable for the cake technique.
Packaging:
- 200g
Villacryl Ortho polymer colorless 2 kg
Villacryl Ortho is a colorless acrylic material for low-temperature pressure polymerization intended for the production of removable orthodontic appliances by pouring powder onto the model and impregnating it with monomer (salt & pepper method) as well as for the repair of orthodontic appliances.
Advantages:
- the ability to individually create colors of any saturation;
- economical, just add dye to obtain a variety of colors;
- low absorption of fluids from the oral cavity;
- biologically neutral;
- thanks to the rapid gelation of the mass, it does not flow from the plaster model;
- perfect transparency of the acrylic mass;
- easy to prepare and process;
- solubility < 5* µg/mm³.
Technical data:
- polymerization process 20 min. 50-60 °C 2 bar;
- fracture strength > 50* MPa;
- sorption < 32* µg/mm³.
Packaging:
- 2000g
Villacryl Ortho MIX set 500g/250ml + 3x12ml
Villacryl Ortho MIX is a colorless, cold-polymerized acrylic material intended for the production of removable orthodontic appliances using the pouring and acrylic dough methods, as well as for the repair of orthodontic appliances.
Advantages:
- colorless;
- economical, just add dye to obtain a variety of colors;
- high mechanical strength;
- biologically neutral;
- universality of applications in the technical-dental laboratory;
- easy to prepare and process.
Technical data:
- mixing proportions: 24 g powder / 10 ml liquid;
- dough preparation time: 6-7 min;
- Shelf life: approx. 15 min;
- minimum polymerization time: 20 min. 45-55 °C, 2 bar;
- fracture strength: > 50* MPa;
- solubility: < 5* µg/mm3;
- sorption: < 32* µg/mm3.
Packaging:
- 500g + 250ml + 3x12ml
Orthocryl Neon blue liquid 250 ml
Fluid for making orthodontic appliances.
- Colour neon blue.
Packaging:
- 250ml
Vertex Orthoplast 4000g + 2x 1000 ml SET
Vertex Orthoplast - self-polymerizing acrylic material for the production of orthodontic appliances.
Characteristics:
- color colorless;
- a wide range of liquid dyes (9 colors + colorless) with a capacity of 250 ml are available for mixing;
- for the production of orthodontic appliances using the dough technique and the pouring technique.
Technical specifications:
- dough phase 9 minutes;
- working time 6 minutes;
- curing time 20 minutes at 55°C and 2.5 bar;
- mixing ratio by volume / parts by weight 1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer);
- bending strength ≥ 50 MPa;
- modulus of elasticity in bending ≥ 1500 MPa;
- water sorption ≤ 32 μg/mm³;
- solubility≤ 5.0 μg/mm³.
Packaging:
- 4000 g powder + 2 x 1000 ml liquid
Orthocryl liquid turquoise 250ml
Fluid for making orthodontic appliances.
- Color turquoise.
Packaging:
- 250ml.
Orthocryl liquid emerald green 250ml
Fluid for making orthodontic appliances.
- Color emerald green.
Packaging:
- 250ml
Orthocryl Neon liquid yellow 250 ml
Fluid for making orthodontic appliances.
- Colour: neon yellow.
Packaging:
- 250ml
Orthocryl Neon liquid orange 250 ml
Orthocryl liquid for making colored orthodontic appliances.
- Neon orange color.
Packaging:
- 250ml
Orthocryl Neon liquid pink 250 ml
Liquid for making colored orthodontic appliances.
- Color neon pink.
Packaging:
- 250ml
Orthocryl Neon liquid green 250 ml
Liquid for making colored orthodontic appliances.
- Colour: neon green.
Packaging:
- 250ml
Orthocryl liquid yellow 250ml
Fluid for making orthodontic appliances.
- Yellow color.
Packaging:
- 250ml
ORTOpoli colorless powder 700g
ORTOpoli acrylic for making orthodontic appliances using the pouring method.
Polymerization conditions:
- Water temperature 60 °C.
- 6 bar pressure.
- Polymerization time 20 minutes.
Packaging:
- 700g
ORTOpoli liquid 500g
ORTOpoli acrylic for making orthodontic appliances using the poured method.
Polymerization conditions:
- water temperature 60 ° C;
- pressure 6 bar;
- Polymerization time 20 minutes.
Colors:
- colorless;
- red;
- blue;
- yellow.
Packaging:
- 500g liquid
ORTOpoli liquid 150g
ORTOpoli liquid 150g
ORTOpoli acrylic for making orthodontic appliances using the poured method.
Polymerization conditions:
- water temperature 60 °C;
- pressure 6 bar;
- Polymerization time 20 minutes.
Colors:
- indigo;
- neon pink;
- neon orange;
- neon yellow;
- green.
Packaging:
- 150g liquid
Villacryl Ortho 4kg + 2 x monomer 1L + 3x color concentrate 50 ml
Villacryl Ortho is a colorless acrylic material for low-temperature pressure polymerization intended for the production of removable orthodontic appliances by pouring powder onto the model and impregnating it with monomer (salt and pepper method) as well as for the repair of orthodontic appliances.
Advantages:
- the ability to individually create colors of any saturation;
- economical, just add dye to obtain a variety of colors;
- low absorption of fluids from the oral cavity;
- biologically neutral;
- thanks to the rapid gelation of the mass, it does not flow from the plaster model;
- perfect transparency of the acrylic mass;
- easy to prepare and process;
- solubility < 5* µg/mm³.
Technical data:
- polymerization process 20 min. 50-60 °C 2 bar;
- fracture strength > 50* MPa;
- sorption < 32* µg/mm³.
Packaging:
- 4kg +2x 1l
- 3x concentrate (red, green, blue)
Estetic ort 2kg+1litre
Estetic Ort, a material for making orthodontic appliance plates.
Characteristics:
- color colorless;
- work using the plastic mass application method;
- pouring powder onto the model and soaking it with monomer ("salt and pepper");
- easily colored with Estetic Ort Kolor liquid dyes;
- meets the requirements of the PN-EN ISO 20795-2 standard.
Technical data:
- mixing proportions: by weight powder/liquid - 3:1;
- dough preparation time: 2-5 min;
- Dough shelf life: 2.5 min;
- polymerization process: 20 min., 40-50°C; 2 bar;
- fracture strength: 66.5 MPa;
- bending elasticity: 2043 MPa;
- solubility: 2.6 μg/mm³;
- sorption: 12.0 μg/mm³.
Packaging:
- 2kg + 1 liter