Kalka Arti-Spray is a universal color indicator for checking occlusal contact points and the accuracy of fitting crowns and bridges. It is easy to apply, creates a thin layer of dye on the surface that can be removed with water.

Features:

• Before use, shake the container and gently spray the indicator on the occlusal surface or the inside of the crown or bridge from a distance of 3-5 cm.
• All invalid contact points can be easily recognized in the colored coating.
• Arti-Spray can also be used to check approximate contact points when fitting crowns or bridges.
• Arti- Spray contains physiologically harmless materials that meet the requirements of the foodstuff standard (LSG)

Package:

• 75 ml spray.

Kalka Occlusion Spray, fine-grained spray, for marking contact points in crowns and bridges. Green color.

Package:

• 75ml. spray.

Occlusive tracing paper Occlutec 75 ml green - promotion buy 6 pieces, get 1 free

Function & Operation:

• Occlutec clearly and in detail marks inaccuracies in crowns and bridges as well as skeletal dentures.

Advantages:

• Particular selectivity.
• Optimal dosing thanks to dry spray technology.
• A homogeneous layer of sprayed material regardless of how full the container is.

Occlutec offers a detailed and clear marking of defective spots in partial dentures, crowns and bridges. Thanks to the supplied tips for surface spraying (transparent tip) and for spot marking (green tip), we can adjust the width of the ribbon stream. Thanks to this, we can use it for various purposes. Occlutec tracing paper is very fine, homogeneous and perfectly covering, so in most cases it is enough to use it once. In addition, the technician maintains full control over the thickness of the carbon layer. All these positives were obtained by the development of dry-spraying techniques, preventing uneven application levels. The already advantageous price / quality ratio has been further improved by the saving in material due to better hiding of the pigments and the application of a homogeneous thin layer of carbon paper. We remove the tracing paper very quickly with steam. Occlutec comes in the two most popular colors, red and green

Package:

1pc / 75 ml

Two-sided articulation paper. U-shaped horseshoe.

Features:

• Blue - Red 80um.
• Universal
• It does not require the use of tweezers.

Package:

72 sheets / 1 pack

Two-sided articulation paper. Shape and simple.

Features:

• Blue - Red 80um.
• Universal.
• It does not require the use of tweezers.

Package :

144 sheets / 1pack

Characteristic:

• Super thin articulation foil
• 8 microns,
• Red colour,
• carbon paper width 22 mm,
• two-sided

Package:

20m

Arti-Fol Metallic 12u is a new High Tech control foil with significantly improved properties. This new control film is a metallized polyester film (Shimstock film) with a thickness of 12u. The new film has a very good dye transfer. Thanks to the metallized reverse side of the foil, it is easy to distinguish the side with the dye layer. Arti-Fol Metallic, thanks to its high tensile strength and low material thickness, is perfect for controlling approximate contact points when installing bridges or crowns.

Features:

• On porcelain and polished metal surfaces, the contact points are clear.
• Metallization largely eliminates the problem of static electricity.
• Easy application without tweezers.
• Very tear-resistant.

Package:

• 20m.

Silver powder facilitating the identification of anatomical structures, perfectly emphasizes the contours and contrasts the surface of the teeth. Apply with a brush - easy to clean.

Package:

25 grams of powder 1 brush

Occlusal tracing paper in spray, red. Promotion: buy 6, get 1 free.

Function and operation:

• Occlutec clearly and in detail marks inaccuracies in crowns and bridges as well as skeletal dentures.

Advantages:

• Particular selectivity.
• Optimum dosage thanks to dry spray technology.
• A homogeneous layer of sprayed material regardless of how full the container is.

Package:

1pc / 75ml

Accurate and efficient spray carbon paper.

Colors:

• green
• blue
• white
• red
• golden.

Package:

• 75 ml.

Articulating tracing paper - super thin 40 u. Blue-red color.

Package:

200 sheets.

Arti-Spot is a contact paint used to check the accuracy of the fit:

• crowns
• inlays and onlays
• telescopic crowns
• buckles
• friction surfaces of the valves.

Directions for use:

• Arti- Spot is applied with a brush to the controlled surface, after a few seconds the solvent evaporates and a thin film about 3u thick forms on the surface.
• Each point of contact destroys the surface of the film exactly at the point of contact.
• The base material clearly shows through at this point, so you can easily recognize this place.

Arti-Spot can also be used to check contact points on high-gloss occlusal surfaces such as gold or porcelain surfaces.

The dye in Arti-Spot is a food dye which is completely harmless.

After application:

• Arti- Spot is easy to remove: with hot water and a brush, eg a toothbrush or an interdental brush, alcohol, isopropyl alcohol or a jet of steam. Dental plaster surfaces can also be cleaned with Arti-Spot with a delicate brush.

Package:

15 ml - blue

Arti-Spot is a contact paint used to check the accuracy of the fit:

• crowns
• inlays and onlays
• telescopic crowns
• friction surfaces of the valves.

Directions for use:

• Arti- Spot is applied with a brush to the controlled surface, after a few seconds the solvent evaporates and a thin film about 3u thick forms on the surface.
• Each point of contact destroys the surface of the film exactly at the point of contact. The base material clearly shows through at this point, so you can easily recognize this place.

Arti-Spot can also be used to check contact points on high-gloss occlusal surfaces such as gold or porcelain surfaces. The dye in Arti-Spot is a food dye which is completely harmless.

After application:

• Arti- Spot is easy to remove: with hot water and a brush, eg a toothbrush or an interdental brush, alcohol, isopropyl alcohol or a jet of steam. Dental plaster surfaces can also be cleaned with Arti-Spot with a delicate brush.

Package:

15 ml - red

Arti-Spot is a contact paint used to check the accuracy of the fit:

• crowns
• inlays and onlays
• telescopic crowns
• buckles
• friction surfaces of the valves.

Directions for use:

• Arti- Spot is applied with a brush to the controlled surface, after a few seconds the solvent evaporates and a thin film about 3u thick forms on the surface.
• Each point of contact destroys the surface of the film exactly at the point of contact.
• The base material clearly shows through at this point, so you can easily recognize this place.

Arti-Spot can also be used to check contact points on high-gloss occlusal surfaces such as gold or porcelain surfaces.

The dye in Arti-Spot is a food dye which is completely harmless.

After application:

• Arti- Spot is easy to remove: with hot water and a brush, eg a toothbrush or an interdental brush, alcohol, isopropyl alcohol or a jet of steam. Dental plaster surfaces can also be cleaned with Arti-Spot with a delicate brush.

Package:

15 ml white

Articulating paper horseshoe, super thin, 40 u. Blue and red color.

Package:

150 sheets

Arti-Fol super thin articulation foil:

• 8 microns
• Red colour
• tracing width 22 mm
• one-sided
• convenient box with a knife for cutting off.

Package:

20 m.

The unique combination of high-tech metal foil (Shimstock 12µ foil) and a double-sided paint coating with finely ground color pigments enables all short-circuit contact points to be clearly marked. The new Arti-Fol Metallic BK 28 also precisely marks wet occlusal surfaces.

For this reason, it can be used universally for all materials, such as metals, ceramics, plastics including composites, and also for natural teeth. The new material enables effective grinding, also with relaxation and occlusal splints (grinding of the teeth). Central and eccentric occlusion stand out clearly on the braces.

Due to the two different colors, central and eccentric occlusion can be represented sequentially using only one foil.

Black / red, ribbon width 22mm.

Package:

20 m.

Characteristic:

Super thin articulation foil:

• 8 microns
• Red colour
• tracing width 22 mm
• one-sided.

Package:

20 m supplement

Characteristics :
Articulating Bausch tracing paper with a progressive color of 200 microns is the only tracing paper that shows various occlusal forces through different shades of dye depending on the chewing force.

LIGHT BIT FORCE GIVES BRIGHT POINTS - MORE DARK FORCE.

The dentist receives a precise distribution of chewing forces within seconds. Premature contact points become immediately visible and can be ground down.
Only with the help of articulating Bausch tracing paper with a progressive tint of 200 microns it is possible to accurately mark the existing differences in chewing forces. Once you have located the wrong contact points, use thinner controls

Package:
300 sheets / red

Characteristic:

Arti-Fol Metallic 12u is a new High Tech control foil with significantly improved properties. This new control film is a metallized polyester film (Shimstock film) with a thickness of 12u. The new film has a very good dye transfer. Thanks to the metallized reverse side of the foil, it is easy to distinguish the side with the dye layer. Arti-Fol Metallic, thanks to its high tensile strength and low material thickness, is perfect for controlling approximate contact points when installing bridges or crowns.

Features:

• On porcelain and polished metal surfaces, the contact points are clear.
• Metallization largely eliminates the problem of static electricity.
• Easy application without tweezers.
• Very tear-resistant.

Package:

20m - supplement

Characteristic:

• Super thin articulation foil
• 8 microns,
• green color,
• carbon paper width 22 mm,
• one-sided.

Package:

20 m.

Characteristic:
Articulating Bausch tracing paper with a progressive color of 200 microns is the only tracing paper that shows various occlusal forces through different shades of dye depending on the chewing force.

LIGHT BIT FORCE GIVES BRIGHT POINTS - MORE DARK FORCE.

The dentist receives a precise distribution of chewing forces within seconds. Premature contact points become immediately visible and can be ground down.
Only with the help of articulating Bausch tracing paper with a progressive tint of 200 microns it is possible to accurately mark the existing differences in chewing forces. Once you have located the wrong contact points, use thinner controls

Package:
300 sheets / red color - supplement

Characteristic:

• Super thin articulation foil
• 8 microns,
• Red colour,
• carbon paper width 22 mm,
• two-sided

Package:

20 m supplement

Articulating paper Bausch, super thin, 40 microns, blue

Bausch articulating papers, super thin, 40 microns, are tear-resistant, covered on both sides with a dye solution. These decals reproduce contact points with great precision thanks to the low thickness of the material. This avoids the formation of defective and blurry contact points. A special layer of liquid dye allows you to clearly mark all occlusal contact points or interference. Even surfaces that are damp from saliva, which are difficult to control, such as gold, porcelain, polished surfaces of metal alloys and plastics, are not a problem.

A special layer of liquid dye consists of many small microcapsules that are soaked in the dye. Even under the pressure of slight chewing forces, the microcapsules break and the dye is clearly deposited on the controlled surfaces. It is also possible to contour several times as the dye regenerates.

Bausch's super-thin occlusive decals are particularly suitable for the representation of static and dynamic occlusion in two colors. In the first stage, the centric contact points (static occlusion) are checked with red, and then the eccentric points (dynamic occlusion) with blue. Of course, the order in which the colors are applied can be changed.

Package:

200 stripes / blue color

Characteristic:
Articulating Bausch tracing paper with a progressive color of 200 microns is the only tracing paper that shows various occlusal forces through different shades of dye depending on the chewing force.

LIGHT BIT FORCE GIVES BRIGHT POINTS - MORE DARK FORCE.

The dentist receives a precise distribution of chewing forces within seconds. Premature contact points become immediately visible and can be ground down.
Only with the help of articulating Bausch tracing paper with a progressive tint of 200 microns it is possible to accurately mark the existing differences in chewing forces. Once you have located the wrong contact points, use thinner controls

Package:
50 sheets, red

Articulating paper Bausch, super thin, 40 microns, blue

Bausch articulating papers, super thin, 40 microns, are tear-resistant, covered on both sides with a dye solution. These decals reproduce contact points with great precision thanks to the low thickness of the material. This avoids the formation of defective and blurry contact points. A special layer of liquid dye allows you to clearly mark all occlusal contact points or interference. Even surfaces that are damp from saliva, which are difficult to control, such as gold, porcelain, polished surfaces of metal alloys and plastics, are not a problem.

A special layer of liquid dye consists of many small microcapsules that are soaked in the dye. Even under the pressure of slight chewing forces, the microcapsules break and the dye is clearly deposited on the controlled surfaces. It is also possible to contour several times as the dye regenerates.

Bausch's super-thin occlusive decals are particularly suitable for the representation of static and dynamic occlusion in two colors. In the first stage, the centric contact points (static occlusion) are checked with red, and then the eccentric points (dynamic occlusion) with blue. Of course, the order in which the colors are applied can be changed.

Package:

• 100 sheets 10x7 cm blue

Articulating tracing paper Bausch, super thin, 40 microns, red

Bausch articulating papers, super thin, 40 microns, are tear-resistant, covered on both sides with a dye solution. These decals reproduce contact points with great precision thanks to the low thickness of the material. This avoids the formation of defective and blurry contact points. A special layer of liquid dye allows you to clearly mark all occlusal contact points or interference. Even surfaces that are damp from saliva, which are difficult to control, such as gold, porcelain, polished surfaces of metal alloys and plastics, are not a problem.

A special layer of liquid dye consists of many small microcapsules that are soaked in the dye. Even under the pressure of slight chewing forces, the microcapsules break and the dye is clearly deposited on the controlled surfaces. It is also possible to contour several times as the dye regenerates.

Bausch's super-thin occlusive decals are particularly suitable for the representation of static and dynamic occlusion in two colors. In the first stage, the centric contact points (static occlusion) are checked with red, and then the eccentric points (dynamic occlusion) with blue. Of course, the order in which the colors are applied can be changed.

Package:

• 100 sheets 10x7 cm, red

Articulation tracing paper:

• super thin
• 40 microns
• blue color
• horseshoe

Package:

150 sheets

Kalka Occlusion Spray

Characteristics:

• Fine-grained tracing paper for marking contact points in crowns and bridges.
• White color

Package:

75ml. spray.

The 100 micron progressive colored articulating tracing paper is a flexible fiber reinforced tracing paper with a high ink content. Thanks to progressive shades, it accurately indicates all short-circuit contacts. The tracing paper is impregnated with hydrophilic wax and pharmaceutical oils, and the dye with the Transculase adhesion promoter enables control on difficult surfaces of high-gloss polished metals, high-gloss ceramics and wet surfaces. Red colour.

Package:

• plastic case 300 pcs

Arti-Fol Metallic 12u is a new High Tech control foil with significantly improved properties. This new control film is a metallized polyester film (Shimstock film) with a thickness of 12u. The new film has a very good dye transfer. Thanks to the metallized reverse side of the foil, it is easy to distinguish the side with the dye layer. Arti-Fol Metallic, thanks to its high tensile strength and low material thickness, is perfect for controlling approximate contact points when installing bridges or crowns.

Features:

• On porcelain and polished metal surfaces, the contact points are clear.
• Metallization largely eliminates the problem of static electricity.
• Easy application without tweezers.
• Very tear-resistant.
• Width 8mm
• Red colour

Package:

• 100 sheets

The 100 micron progressive colored articulating tracing paper is a flexible fiber reinforced tracing paper with a high ink content. Thanks to progressive shades, it accurately indicates all short-circuit contacts. The tracing paper is impregnated with hydrophilic wax and pharmaceutical oils, and the dye with the Transculase adhesion promoter enables control on difficult surfaces of high-gloss polished metals, high-gloss ceramics and wet surfaces. Blue color

Package:

• plastic case 300 pcs

To highlight the surface texture of the teeth in a ceramic reconstruction and on a plaster model. Set with golden powder, surface moisturizer and brush.

Package:

• surface marker 5 g

• surface liquid 25 ml

• brush