Modeling wax for making models of denture base plates.

Characteristics:

• hard wax.
• Dark pink color.
• Based on natural beeswax

Packaging:

• 500g (24 plates)

Semicircular wax profiles 2.0x1.0mm.

Characteristics:

• No surface tension.
• Very smooth.

Package:

• 50g.

Round wax profiles 0.6mm.

Characteristics:

• No surface tension.
• Very smooth.

Packaging:

• 12g.

PK wax templates for premolar clamps.

Characteristics:

• Made of the best raw materials.
• Without fillers, burns without residue.

Packaging:

• 200pcs/pack

MK wax templates for molar clamps.

Characteristics:

• Made of the best raw materials.
• No fillers, burns without residue.

Packaging:

• 200pcs/pack

Wax stencils RN III Round retention mesh.

Characteristics:

• Made of the best raw materials.
• No fillers, burns without residue.

Packaging:

• 20pcs/pack

Wax stencils LR retention with holes to the mandible offset, length 130mm. width 7mm.

Characteristics:

• Made of the best raw materials.
• No fillers, burns without residue.

Packaging:

• 25pcs/pack

2.0mm round wax profiles. For casting channels.

Characteristics:

• No surface tension.
• Very smooth.
• Medium hard wax wire.

Packaging :

• 250g roll

RKG wax stencils circular buckles straight.

Characteristics:

• Made of the best raw materials.
• No fillers, burns without residue.

Packaging:

• 200pcs/pack

Modeling wax in plates, pink "Regular" - optimal

• It adapts its plasticity to the ambient temperature (can also be used in tropical zones)

Packaging:

• 1kg / 46 wax tiles

TK Wax Stencils I'' Bonyhard Clasps''

Characteristics:

• Made of the best raw materials.
• No fillers, burns without residue.

Packaging:

• 200 buckles/pack

2.5mm round wax profiles. For casting channels.

Characteristics:

• No surface tension.
• Very smooth.
• Medium hard wax wire.

Packaging:

• 250g roll.

Round wax profiles 3.0mm. For foundry channels.

Characteristics:

• No surface tension.
• Very smooth.
• Medium hard wax wire.

Packaging :

• 250g roll.

Round wax profiles 4.0mm. For foundry channels.

Characteristics:

• No surface tension.
• Very smooth.
• Medium hard wax wire.

Packaging :

• 250g roll.

Undercut blocking wax - pink. This wax has been developed for blocking out undercuts, for placing bracing steps and for relieving critical areas of models.

Characteristics:

• It can be scraped and cut well.
• It adheres strongly to the model and does not lose its shape even when rinsing in water and duplicating at temperatures up to 54 °C.
• Melting point from 90 °C.
• Solidification point approx. 68 °C.

Packaging :

• 70g.

Semicircular wax profiles 3.5x1.75mm.

Characteristics:

• No surface tension.
• Very smooth.

Packaging:

65g.

Textured casting wax (mocha) green, BEGO.

Characteristics:

• Thickness 0.5mm.
• Clearly veined.
• Plate 15x7.5 cm.
• Proven modeling wax for modeling maxillary skeletal denture plates.
• The wax texture gives the denture plate a more anatomical surface.
• It adapts well and adheres exactly to the model.

Packaging :

• 15pcs/pack

Wax stencils PR II large retention arch.

Characteristics:

• Made of the best raw materials.
• No fillers, burns without residue.

Packaging :

• 24pcs/pack

Preparatory and casting wax.

Characteristics:

• Self-adhesive.
• Soft.
• Well fitting.
• Transparent.
• Tiles 10x10cm.
• Thickness 0.5mm.

Packaging :

• 32 tiles.

Textured casting wax (mocha) green BEGO . 15x7.5cm.

Characteristics:

• Thickness 0.5mm
• Medium veined
• Proven modeling wax for modeling maxillary skeletal denture plates.
• The wax texture gives the denture plate a more anatomical surface.
• It adapts well and adheres exactly to the model.

Packaging:

15pcs/pack

Wax templates for circular buckles bent.

Characteristics:

• These pre-shaped clamp profiles simplify modeling and save time.
• The form of the profiles allows for their wide application thanks to the possibility of individual modification.

Packaging :

• 200pcs/pack

Wax stencils RK circular curved buckles.

Characteristics:

• Made of the best raw materials.
• No fillers, burns without residue.

Packaging :

• 200pcs/pack

TK Wax Templates And Bonyhard Buckles.

Characteristics:

• These pre-shaped clamp profiles simplify modeling and save time.
• The form of the profiles allows for their wide application thanks to the possibility of individual modification.

Packaging :

• 200pcs/pack

MK wax templates for molar clamps.

Characteristics:

• These pre-shaped clamp profiles simplify modeling and save time.
• The form of the profiles allows for their wide application thanks to the possibility of individual modification.

Packaging:

• 200pcs/pack

Sublingual arches for the mandible.

Characteristics:

• Teardrop shape.
• Size 4.0x1.7mm.

Packaging:

• 65g/pack

3.5mm round wax profiles for casting channels.

Characteristics:

• No surface tension.
• Very smooth.
• Medium hard wax wire.

Packaging :

• 250g roll.

Half-round wax profiles 1.5x0.75mm.

Characteristics:

• No surface tension.
• Very smooth.

Packaging :

• 25g/pack

Semicircular wax profiles 1.8 x 0.9mm

Features:

• No surface tension.
• Very smooth.

Package :

50g.

Sublingual wax arches for the lower jaw

Features:

• Teardrop shape.
• 4.0x2.0mm.

Package :

65g / pack

RN wax templates and thick retention grid.

Features:

• Made of the best raw materials.
• No fillers, burning without residue.

Package :

20 pcs / pack

Wax wire for casting channels.

Characteristics:

• green color
• medium hard
• thickness 3.0mm.
• easy to form, does not bend and burns without residues.
• high resistance to deformation and compression during forming.

Packaging:

• 250g roll. (approx. 36m)

Wax wire for casting channels.

Characteristics:

• Green color.
• Medium-hard.
• Thickness 3.5mm.
• Easy to form, does not bend and burns without residue.
• High resistance to deformation and compression during forming.

Packaging:

• 250g roll (about 28m)

Wax clasp profiles for molars and premolars, medium-hard and shape-retaining.

Characteristics:

• On molars and premolars, the semi-drop-shaped cross-section prevents the deposition of food debris and strengthens the stability along the entire length of the clamps, giving them a very slim shape.
• Very good patient acceptance.

Packaging:

• 280 buckles/pack

Textured casting wax (mocha) green.

• Board thickness 0.6mm
• Medium veined (mittel)
• Size 15x7.5cm.

Characteristics:

• Proven modeling wax for modeling maxillary skeletal denture plates.
• The wax texture gives the denture plate a more anatomical surface.
• It adapts well and adheres exactly to the model.

Packaging:

• 15pcs/pack

BEGO smooth casting wax. It adheres strongly and burns without residue.

Characteristics:

• Dimensions 17.5x8cm.
• Thickness 0.5mm.
• Green color.

Packaging:

• 15pcs/pack

Smooth casting wax. It adheres strongly and burns without residue.

Characteristics:

• Green color.
• Thickness 0.4mm.
• Size 17.5x8cm.

Packaging :

• 15pcs/pack

Texture casting wax (weather) green, medium veined, 0.4mm thick, 15x7.5cm.

Characteristics:

• Proven modeling wax for modeling maxillary skeletal denture plates.
• The wax texture gives the denture plate a more anatomical surface.
• It adapts well and adheres to the model.

Packaging :

• 15pcs/pack

Green melting wax.

Application:

• Making wax caps when modeling crowns and bridges using the soaking technique.
• Processing temperature 70-75 °C.

Packaging:

• 1pc/150g

MK wax templates for molar clamps.

Packaging:

• 10 sheets.

PK wax templates for premolar clamps.

Packaging:

• 10 sheets.

TK wax stencils and Bonyhard buckles.

Package:

• 10 panes.

Perforated round wax retentions, 13.2 cm long.

Characteristics:

• For modeling the retention sites of skeletal bases.
• The retentions were made of a wax composition with high stability and plasticity.
• They adhere very well to the model.

Package :

• 25 pcs / box

Wax stencils RN III round retention net.

Characteristics:

• They are made of specially developed casting wax.
• They are characterized by high flexibility and adhesion.

Packaging:

• 20pcs/pack

Preparatory and casting wax.

Characteristics:

• Self-adhesive.
• Soft.
• Well fitting.
• Transparent.
• Tiles 10x10 cm.
• Thickness 0.4mm.

Packaging:

• 32 tiles

Textured casting wax (weather) .

• Green color.
• Clearly veined.
• Thickness 0.4mm.
• Size 15x7.5cm.

Characteristics:

• Proven modeling wax for modeling maxillary skeletal denture plates.
• The wax texture gives the denture plate a more anatomical surface.
• It adapts well and adheres exactly to the model.

Packaging :

• 15pcs/pack

Medium-hard, inorganic modeling wax for conventional crown and bridge techniques. Optimized for modeling with an electric wax knife.

Renfert catalog number 4950200

Characteristics:

• Opaque gray color.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

• 1pc/75g

GEO cervical wax, burgundy transparent.

Renfert catalog number 4861000

Characteristics:

• Wax for shaping the edges of crowns.
• Very little shrinkage, stable, can be applied precisely and thinly to the edge of the fitting.
• It has good surface treatment properties.

Packaging:

• 1pc/75g.

GEO-Dip yellow wax for the soaking technique.

Renfer catalog number 4823000

Characteristics:

• Wax for use in electric heaters.
• Produced in the form of practical granules.
• Thanks to its excellent quality and flexibility, it enables precise production of wax caps.

Packaging:

• 1pc/200g.

Wax Stencils KR Retention Comb.

Characteristics:

• Made of the best raw materials.
• No fillers.
• Burning without residue.

Packaging:

• 200pcs/pack

Round wax profiles size 0.8mm.

Characteristics:

• No surface tension.
• Very smooth.

Packaging :

• 25g/pack