Outlet Zirconium AG ST Color D2 89-71-25mm short expiry date

Zirconium AG ST Color D2 89-71-25mm short shelf life.

Packaging:

• 1pc

Zirconium ST Color 98x10mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Zirconium ST Color 98x12mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Zirconium ST Color 98x14mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Zirconium ST Color 98x16mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Outlet Zirconium AG ST Color 89x71x16mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and cold isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

ST-Super translucent

Characteristics:

• Recommended for work in full anatomical shape in the lateral section.

Destiny:

• Hats
• Bridges
• 3-4 point bridge
• Bridge with overhang (not recommended for patients with bruxism)
• Bridge on inlays (not recommended for patients with bruxism)
• Maryland bridge (not recommended for bruxism patients)
• Telescopic crown
• Individual connectors

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic phase aging (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 pc

Outlet Zirconium AG ST Color 89x71x14mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and cold isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

ST-Super translucent

Characteristics:

• Recommended for work in full anatomical shape in the lateral section.

Destiny:

• Hats
• Bridges
• 3-4 point bridge
• Bridge with overhang (not recommended for patients with bruxism)
• Bridge on inlays (not recommended for patients with bruxism)
• Maryland bridge (not recommended for bruxism patients)
• Telescopic crown
• Individual connectors

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic phase aging (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 pc

Outlet Zirconium AG ST Color 89x71x12mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and cold isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

ST-Super translucent

Characteristics:

• Recommended for work in full anatomical shape in the lateral section.

Destiny:

• Hats
• Bridges
• 3-4 point bridge
• Bridge with overhang (not recommended for patients with bruxism)
• Bridge on inlays (not recommended for patients with bruxism)
• Maryland bridge (not recommended for bruxism patients)
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic phase aging (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 pc

Outlet Zirconium AG ST Color 89x71x18mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and cold isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

ST-Super translucent

Characteristics:

• Recommended for work in full anatomical shape in the lateral section.

Destiny:

• Hats
• Bridges
• 3-4 point bridge
• Bridge with overhang (not recommended for patients with bruxism)
• Bridge on inlays (not recommended for patients with bruxism)
• Maryland bridge (not recommended for bruxism patients)
• Telescopic crown
• Individual connectors

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic phase aging (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 pc

Outlet Zirconium AG ST Color 89x71x20mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and cold isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

ST-Super translucent

Characteristics:

• Recommended for work in full anatomical shape in the lateral section.

Destiny:

• Hats
• Bridges
• 3-4 point bridges
• Bridge with overhang (not recommended for patients with bruxism)
• Bridge on inlays (not recommended for patients with bruxism)
• Maryland bridge (not recommended for bruxism patients)
• Telescopic crown
• Individual connectors

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%.

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic phase aging (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 pc

Zirconium ST Color 98x18mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Zirconium ZZ ST Color 95x14mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Zirconium ZZ ST Color 95x16mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Zirconium ST Color 98x20mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Zirconium ST Color 98x25mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc

Zirconium ZZ ST Color 95x18 mm

Zirconium is a new line of zirconium oxide-based materials intended for use in CAD/CAM technology.

Zirconium products are SFDA, ISO13485, CE and FDA certified.

Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconium discs.

• ST-Super translucent.

• Recommended for full-contour crown and bridge work.

Destiny:

• full contour crowns and bridges;
• 3- 4 point bridges;
• telescopic crowns;
• individual connectors.

Chemical composition:

• ZrO₂ + HfO₂+ Y₂O ₃>97%
• Y₂O ₃ 4.4-5.5%
• Al₂O₃ <0.5%
• Fe₂O₃<0.3%
• Er₂O₃<1.0%
• Other oxides <1.2%

Physical properties:

• density after sintering - 6.08±0.01g/cm³
• CTE (25- 500°C) - (10.05±0.5)×10-⁶ K-¹
• strength after sintering - 1300 Mpa
• monoclinic phase content in aged samples - <15%
• radioactivity <0.1Bq/g
• sintering temperature - 1530°C
• translucence - 43%

Packaging:

• 1pc