Gingifast Elastic 2x50ml

Type A silicone material intended for imitating gums on a model.

Characteristics:

• the preparation is administered from a dispenser, quickly and conveniently;
• designed to imitate gums when making bridges;
• provides excellent aesthetics thanks to its transparency and the presence of veins to achieve a natural effect;
• especially recommended for undercuts and small thicknesses.

Technical data:

• mixing ratio (Base: Catalyst) 1:1;
• working time 2 minutes;
• setting time 10 minutes;
• hardness (Shore A) - 40;

Packaging:

• 2 x 50 ml + 10 ml separator
• 12 mixing tips
• 12 Oral Tips

Aurosil Gingival Hard 2x50ml NEW

High-quality addition silicone based on polyvinylsiloxane, developed to enable precise reproduction of the shape and structure of the gums on the model.

It is characterized by high dimensional stability and accuracy of reproduction, which significantly improves work in prosthetic laboratories.

The material is available in two hardness variants. This allows for precise adjustment of properties to the specific clinical situation and planned prosthetic restoration, ensuring the desired end result.

AUROSIL GINGIVAL HARD – a material designed for use in implant prosthetics. It provides excellent scanning results.

Advantages:

• material intended for automatic mixing, applied using a dipenser;
• very aesthetic end result;
• simple and quick material processing;
• good pigmentation of the material.

Technical data:

• mixing ratio: 1:1;
• working time: 1 minute;
• total setting time: 5 minutes;
• time to release the model from the mold: 12 minutes;
• Shore A hardness: 68±2;
• material memory: > 99.8%;
• linear dimensional change: < 0.3%;
• tear resistance (N/mm): < 7.0.

Color:

• light pink banners.

Packaging:

• 2 x Aurosil Gingival Soft 50 ml, 6 x mixing tips, 1 x separator 10 ml.

Aurosil Gingival Soft 2x50ml NEW

High-quality addition silicone based on polyvinylsiloxane, developed to enable precise reproduction of the shape and structure of the gums on the model.

It is characterized by high dimensional stability and accuracy of reproduction, which significantly improves work in prosthetic laboratories.

The material is available in two hardness variants. This allows for precise adjustment of properties to the specific clinical situation and planned prosthetic restoration, ensuring the desired end result.

AUROSIL GINGIVAL SOFT - silicone intended for use in fixed dentures and implantology.

Advantages:

• material intended for automatic mixing, applied using a dipenser;
• very aesthetic end result;
• simple and quick material processing;
• good pigmentation of the material.

Technical data:

• mixing ratio: 1:1;
• working time: 1 minute;
• total setting time: 5 minutes;
• time to release the model from the mold: 12 minutes;
• Shore A hardness: 47±2;
• material memory: > 99.8%;
• linear dimensional change: < 0.3%;
• tear resistance (N/mm): < 7.0.

Color:

• light pink banners.

Packaging:

• 2 x Aurosil Gingival Soft 50 ml, 6 x mixing tips, 1 x separator 10 ml.

Gingifast Rigid 2x50ml

Gingifast additive silicones are used to reproduce the morphology of the gums on models in fixed dentures and implants.

Gingifast Rigid is recommended for the direct technique.

Thanks to its balanced hardness, it can be processed with drills and is a leading product in the field of implant prosthetics.

Technical data:

• hardness 70 Shore A;
• setting time: 10 min;
• mixing ratio 1:1;
• easy application using Dispenser.

Packaging:

• 2 x 50 ml + 10 ml separator
• 12 mixing tips
• 12 Oral Tips

Esthetic Mask automix 2x50ml

Type A silicone material designed to imitate gums on a model for excellent natural aesthetics.

Characteristics:

• for automatic mixing;
• final hardness: 45 Shore A;
• quick and easy processing;
• mixing ratio 1:1;
• administration from a dispenser;
• color: gummy.

Packaging:

• 2x50ml automix base+catalyst
• 15ml separator
• 10x mixing cannulas, yellow

Dreve GumQuick Set gum mask 2x50ml + DuoSep + 12 mixing tips

Dreve GumQuick Set is an advanced gum mask material, developed specifically for C&B work. It boasts very high tear resistance, ensuring durability and precision of the models produced.

Dreve catalog number D504842

Characteristics:

• high accuracy of detail reproduction;
• no material shrinkage during setting;
• high dimensional stability during storage;
• optimal flow properties for easy application.

Physical data:

• processing time - 1:30 min;
• setting time - 6:30 min;
• final hardness - 60 Shore A;
• tensile strength - 4.5 MPa;
• elongation at break - 175%.

Packaging:

• 2x50 ml
• 12 mixing tips
• 10 ml duo separator

Dreve GumQuick Implant Set gingival implant mask 2x50 ml + DuoSep + 12 mixing tips

A gingival mask material specifically developed for implantology. High final hardness and low elasticity ensure safe and accurate secondary structures. The included DuoSep sealant also allows for direct impression taking.

Dreve catalog number D504892

Characteristics:

• high final hardness: ensures stability and precision of work;
• low flexibility: guarantees reliability and precise fit of secondary structures;
• abrasion resistance: the polymerized surface of the gingival mask is extremely durable;
• multifunctionality: the included DuoSep isolating agent enables direct impression taking.

Physical data:

• processing time: 1.30 min;
• setting time: 6.30 min;
• final hardness: 75 Shore A;
• tearing resistance: 2.9N/mm2;
• elongation at break: 56%;
• low consistency: type 3.

Packaging:

• 2x50 ml
• 12 mixing tips
• 10 ml duo separator

Dreve GumQuick Scan Set CAD/CAM gingival mask 2x50 ml + DuoSep + 12 mixing tips

Dreve GumQuick Scan is a high-quality gingival mask designed specifically for precise scanning in CAD/CAM systems. Thanks to its properties, the material ensures excellent detail reproduction, which is crucial for prosthetic work. The included DuoSep isolating agent allows for direct impression preparation of the mask, significantly streamlining work in the dental office and laboratory.

Characteristics:

• very accurate reproduction of details and stable shape retention, which guarantees high quality of digital models;
• the mask is compatible with all scanners available on the market;

Material data:

• final hardness: 65 Shore A;
• processing time: 1:30 min;
• consistency: low - type 3;
• removal time: 6:30 min;
• tensile strength: 4.5 MPa;
• catalog number: D504890

Packaging :

• 2 x 50 ml of material
• 12 mixing tips
• 10 ml DuoSep separator

Gingifast Elastic CAD 2x50ml gum mask

Universal low-viscosity addition silicone adapted to reproduce the shape of the gums in a polyvinyloxane mass.

Characteristics:

• easy to apply;
• suitable for scanning;
• accurate and stable dimensions;
• possible use: indirect method on a silicone key and direct method on an impression;
• hardness: 40 Shore;
• two-component mass;
• easy application using Dispenser D2.

Packaging:

• Cartridge 2x50 ml
• Separator 10 ml
• 12 application tips

Separating Agent 15ml

Separating Agent, separator for the Esthetic Mask gum mask.

Packaging:

• 1 pc./15ml