BEGO blue ring
Plastic ring, casting mold for embedding skeletons.
Characteristics:
- blue color;
- size large.
Packaging:
- 1pc.
BEGO red ring
Plastic ring casting mold for embedding skeletons.
Characteristics:
- red color;
- size small.
Packaging:
- 1pc.
Ring lining tape 25m
Asbestos-free tape for lining casting rings.
Characteristics:
- width 50mm;
- thickness 1mm;
- length 25m.
Packaging:
- 1pc/25m
Ring no. 3 48x55mm
Metal casting ring no. 3.
Dimensions:
- diameter 48mm;
- height 55mm.
Packaging:
- 1pc.
Ring no. 6 65x55mm
Metal casting ring no. 6.
Dimensions:
- diameter 65mm;
- height 55mm.
Packaging:
- 1pc.
Ring no. 9 80x55mm
Metal casting ring no. 9.
Dimensions:
- diameter 80mm;
- height 55mm.
Packaging:
- 1pc.
Funnel with metal tip
Funnel made of plastic with a slide-in tube for insertion into the duplicating material.
Packaging:
- 1pc.
Silicone ring different sizes (1,3,6)
Silicone ring system.
Sizes:
- size 1 (31 mm / 1¼ˮ) up to 60 g investment;
- size 3 (50 mm / 2ˮ) up to 180 g of investment;
- Size 6 (62 mm / 2½ˮ) up to 360 g of investment.
Advantages:
- time saving compared to cuff systems, metal rings;
- low wear and tear, therefore more economical compared to other systems;
- easy release of the mold from the ring.
Packaging:
- 1pc.
Casting ring pliers 31cm
Handle for removing hot rings from the annealing oven.
- length 31 cm.
Packaging:
- 1 pc.
Casting ring pliers 43 cm
Handle for removing hot rings from the annealing oven.
Characteristics:
- length 43 cm.
Packaging:
- 1 pc.
Silicone ring no. 6
Attention:
- You can order the ring stand under number 12561
Round silicone ring without base, for economical and direct coverage, used when making crowns and bridges.
Inner diameter:
- 62mm
Advantages:
- increased surface area thanks to longitudinal grooves on the inner surface;
- does not hinder bond expansion, which allows for optimal casting fit;
- The silicone ring provides more even heat absorption and controlled ring cooling.
Packaging:
- 1pc (without stand)
Silicone ring with base
Silicone ring with base.
Size:
- number 1 - 4 x 5cm;
- number 2 - 5 x 5.5cm;
- number 3 - 6 x 6cm;
- number 4 - 7.5 x 6.5 cm;
- number 5 - 9 x 7cm.
Packaging:
- 1pc.
40 cm Falcon Casting Ring Tongs
Tongs for removing rings from the annealing oven.
Length:
- 40 cm.
Packaging:
- 1 pc.
Silicone ring model mold no. 2
Silicone ring, model mold.
The ring stand is located under number 8964 - with cone, 15185 - without cone
Designed for direct and economical shielding in conjunction with a model mould ring base.
Can also be used in the crown and bridge technique.
Advantages:
diameter 80 x 65 mm;
increased surface area thanks to longitudinal grooves on the inner surface;
does not hinder bond expansion, which allows for optimal casting fit;
the silicone ring ensures more uniform heat absorption and controlled cooling of the sleeve;
the distance of the model from the sleeve wall can be equal in every place, which allows for a better fit.
Packaging:
- 1pc (without stand)
Silicone ring no. 9
Attention:
- You can order the ring stand under number 12360
Round silicone ring, without base, for economical and direct coverage, used when making crowns and bridges.
Inner diameter:
- 75mm.
Advantages:
- increased surface area thanks to longitudinal grooves on the inner surface;
- does not hinder bond expansion, which allows for optimal casting fit;
- The silicone ring ensures more even heat absorption and controlled cooling of the ring.
Packaging:
- 1pc (without stand)
Support for the ring no. 3 model form with a cone
Stand for model form no. 3 with a cone.
Package:
- 1 piece.
Silicone ring model mold no. 3
Silicone ring, model mold.
The ring stand is under number 9153 with cone, 15186 without cone.
Designed for direct and economical covering in conjunction with the model mold ring base.
Can also be used in crown and bridge techniques.
Characteristics:
- diameter 90 x 75 mm;
- enlarged surface thanks to longitudinal grooves on the inner surface;
- does not hinder the expansion of the bond, which allows for optimal fitting of the casting;
- the silicone ring ensures more uniform heat absorption and controlled cooling of the muff;
- the distance of the model from the sleeve wall can be equal in every place, which allows for a better fit.
Packaging:
- 1 pc. (without stand)
Silicone ring with conical base
Silicone rings with plastic conical base.
Sizes:
- number 1 inner size 30×55 mm;
- number 3 internal size 48×55 mm;
- number 6 internal size 65×55 mm;
- number 9 internal size 80×55 mm.
Packaging:
- 1pc.
BEGO blue funnel 1 piece
Universal funnel for partial dentures.
The funnel is used when there is not enough space for forming funnels.
Fits all Bego casting systems.
Packaging:
- 1pc.
Support for ring no. 6, round form with cone
Support for ring no. 6, round form with a cone.
Package:
-1 piece.
Silicone ring no. 3
Attention:
- You can order the ring stand under number 5137.
Round silicone ring without base, for economical and direct coverage, used when making crowns and bridges.
Inner diameter:
- 45mm
Advantages:
- increased surface area thanks to longitudinal grooves on the inner surface;
- does not hinder bond expansion, which allows for optimal casting fit;
- The silicone ring ensures more even heat absorption and controlled cooling of the ring.
Packaging:
- 1pc (without stand)
Support for ring no. 2, model form without cone
Stand for model form no. 2 without a cone.
Package:
- 1 piece.
Base for ring no. 3, model form without cone
Stand for model form no. 3 without cone.
Package:
- 1 piece.