VarseoVest C&B 160g
VarseoVest C&B high-temperature precision investment material for casting 3D printed crown and bridge frameworks.
Advantages:
- excellent fit and smooth surfaces of cast objects;
- very good flow properties and long processing time enable easy shielding of printed objects;
- great time saving during the heating process, directly into the furnace heated to 900 °C, time 20 min;
- high strength of the covering mass – the sleeves do not crack or tear despite the expansion of the plastic;
- Clear expansion control using the special BegoSol ® CC mixing fluid ensures reproducible fitting results.
Physical data:
- processing time: approx. 3 min 15 sec;
- flow properties 140 mm;
- linear thermal expansion: 1.3%;
- Compressive strength: approx. 5 MPa.
Packaging:
- 1pc/160g
BegoSol CC liquid for investment 1000ml
Begosol CC liquid, compatible with VerseoVest C&B mass.
Packaging:
- 1l
VarseoVest P plus 300g protective mass
VarseoVest P plus, designed for embedding 3D-printed skeletal prosthesis structures.
Advantages:
- Perfect fit and smooth surfaces of cast objects.
- Excellent flow properties and long processing time enable easy shielding.
- Great time saving in the heating process; placed in the preheated oven after 20 minutes at 800–950 °C.
- High resistance of the covering mass – the sleeves do not tear or crack despite the expansion of the plastic.
- Varseo Vest P is characterized by reduced dust formation during processing, which contributes to a significant reduction of harmful quartz and cristobalite dust in the laboratory.
- Cures with edge stability, good release.
- Clear expansion control using the special BegoSol ® K mixing fluid ensures reproducible fitting results.
Physical data:
- Preparation time: approx. 4 min 40 sec.
- Flow properties: 145 mm.
- Linear thermal expansion: 0.9%.
- Compression resistance: approx. 8 Mpa.
Packaging:
- 1pc/300g
Hinrivest RP investment material for 3D printing 400g
Extremely precise phosphate investment, graphite-free.
Hinrivest RP has been specially developed for casting printed frame prostheses (rapid prototyping) and milled wax and resin parts in other printed works.
Advantages:
- Super fine structure.
- Creamy consistency.
- Perfect match.
- Very smooth casting surface.
product instructions are located under the product photo - click the PDF icon
Packaging:
- 400 g
Hinrivest RP liquid for 3D investment material 1L
Hinrivest RP liquid for 3D investment material
Packaging:
- 1 yr
Hinrivest RP (50x400g) investment material + investment liquid 1L Promotion
Extremely precise phosphate investment, graphite-free,
Hinrivest RP has been specially developed for casting printed frame prostheses (rapid prototyping) and milled wax and resin parts in other printed works.
Advantages:
- Super fine structure.
- Creamy consistency.
- Perfect match.
- Very smooth casting surface.
product instructions are located under the product photo - click the PDF icon
Packaging:
- 50x400 g + 1000 ml liquid