EVE Universal eraser blue lens 22x4mm 1pc

EVE Universal - flexible silicone polishing rubbers.

Designed for processing:

• porcelain;
• precious alloys;
• acrylic.

Characteristics:

• color blue;
• high gloss polishing;
• fine-grained;
• recommended speed: 7,000- 10,000 rpm;
• size 22x4mm.

Packaging:

• 1 pc.

Double-sided separator S 929/220

Double-sided separator with diamond coating mounted on a holder.

Characteristics:

• very flexible.
• diameter 22x0.10mm.

Packaging:

• 1pc.

Double sided separator 929/220

Double-sided separator with diamond coating mounted on a holder.

Size:

• diameter 22x0.17mm;
• two-sided marginal embankment;
• flexible.

Packaging:

• 1pc.

Double sided separator 928/220

Double-sided separator with diamond coating over the entire surface, mounted on a holder.

Size:

• diameter 22x0.30mm.
• embankment over the entire surface, two-sided.

Packaging:

• 1pc.

Diamond Macro DFS 59161

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

DFS catalog number 59161.

Characteristics:

• shape: pear;
• diameter: 6.0 mm;
• Macro diamond: standard grit;
• revolutions: 15,000 - 30,000 rpm;
• application: application - chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

EVE Ecoceram eraser 22mm 10pcs

Erasers for finishing and polishing porcelain restorations.

Characteristics:

• the rubber bands adapt perfectly to the processed surface;
• silicon carbide abrasive material;
• circle, size 22x3mm;
• recommended operating speed 7,000 - 15,000 rpm, max 25,000 rpm;
• coarse-grained, gray in color.

Packaging:

• 10pcs/1pack

EVE rubber Ecoceram lens 22mm 10 pieces

Erasers for finishing and polishing porcelain restorations.

Characteristics:

• the rubber bands adapt perfectly to the processed surface;
• silicon carbide abrasive material;
• lens, size 22x4mm;
• recommended operating speed 7,000 - 15,000 rpm, max 25,000 rpm;
• coarse-grained, gray in color.

Packaging:

• 10pcs/1pack

Diamond Micro DFS 50212

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50212

Characteristics:

• shape: thin rounded cylinder;
• diameter: 2.5 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain

Packaging:

• 1 pc.

EVE Universal rubber ring pink 17mm 1 piece

EVE Universal flexible silicone polishing rubbers.

Designed for processing:

• porcelain;
• precious alloys;
• acrylic.

Characteristics:

• pink eraser, very fine-grained;
• polishing to a mirror shine;
• speed - 7,000- 10,000 rpm;
• circle, size 17x2.5mm.

Packaging:

• 1 pc.

Diamond Superturbo DFS 53161

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp parts of the diamond emerge.

DFS catalog number 53161.

Characteristics:

• pear shape;
• diameter 6mm;
• Superturbo diamond, thick embankment;
• revolutions 15,000 - 30,000 rpm;
• application - chrome-cobalt;
• on the rectum.

Packaging:

• 1 pc.

EVE Universal rubber ring pink 22mm 1 piece

Flexible silicone polishing rubbers.

Designed for processing:

• porcelain;
• precious alloys;
• acrylic.

Characteristics:

• pink eraser, very fine-grained;
• polishing to a mirror shine;
• recommended speed - 7,000- 10,000 rpm. max. 20,000 rpm;
• circle, size 22x3mm.

Packaging:

• 1 pc.

EVE Universal eraser cylinder white 1 piece

Universal rubbers - flexible silicone polishing rubbers.

Designed for processing:

• porcelain;
• precious alloys;
• acrylic.

Characteristics:

• white coarse eraser;
• for pre-treatment;
• recommended speed: 7000- 10,000 rpm.max.20,000 rpm;
• sharpened cylinder, size 6x24mm;
• cylinder, size 7x20mm.

Packaging:

• 1 pc.

DFS TOP-FLEX Diamond Separator ⌀ 19mm

Flexible separator for separating and contouring porcelain.

DFS catalog number 141921.

Characteristics:

• diameter: 19mm;
• thickness: 0.10mm;
• fill: superfine, yellow stripe;
• revolutions: from 3' to 5000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

Diamond coated drill for handpiece 1 piece

Diamond-coated drills for handpieces.

Application:

• for processing porcelain.

Possibility to purchase the entire PLU 8995 set:

Packaging:

• 1 pc.

Diamond Micro DFS 50161

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number 50161

Characteristics:

• shape: pear;
• diameter: 6.0 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

EVE Universal rubber lens white 22mm 1pc or 100pcs

EVE Universal - flexible silicone polishing rubbers.

For processing:

• porcelain;
• precious alloys;
• acrylic.

Characteristics:

• white coarse eraser;
• for pre-processing;
• recommended speed: 7,000- 10,000 rpm. max. 20,000 rpm;
• lens size 22x4mm.

Packaging:

• 1pc or 100pcs

Diamond Turbo DFS 55161

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number 55161

Characteristics:

• shape: pear;
• diameter: 6.0 mm;
• Turbo diamond: thick layer;
• revolutions: 15,000 - 30,000 rpm;
• application: application - chrome-cobalt, palladium.

Packaging:

• 1 pc.

Diamond separator without handle

Separator with diamond embankment.

Description:

• diameter 22mm;
• diamond coating according to ISO 514 (60/40 microns) - fine;
• diamond coating according to ISO 524 (100/80 microns) - coarse.

Packaging:

• 1pc.

EVE Universal eraser pink lens 22mm 1pc

Flexible silicone polishing rubbers.

Designed for processing:

• porcelain;
• precious alloys;
• acrylic.

Characteristics:

• pink eraser, very fine-grained;
• polishing to a mirror shine;
• recommended speed: 7,000- 10,000 rpm;
• lens size 22x4mm.

Packaging:

• 1 pc.

EVE Universal rubber ring white 22mm 1 piece or 100 pieces

Flexible silicone polishing rubbers.

Designed for processing:

• porcelain;
• precious alloys;
• acrylic.

Characteristics:

• white coarse eraser;
• for pre-treatment;
• recommended speed: 7,000 - 10,000 rpm. max. 20,000 rpm;
• size 22x3 mm.

Packaging:

• 1 pc. or 100 pcs.

Diamond Micro DFS 50131

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50131.

Characteristics:

• shape: lens disc;
• diameter: 8.0 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

Diamond Turbo DFS 55092

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

DFS catalog number 55092.

Characteristics:

• shape: flame;
• diameter: 3.0 mm;
• Turbo diamond: thick layer;
• revolutions: 15,000 - 30,000 rpm;
• application: application - chrome-cobalt, palladium.

Packaging:

• 1 pc.

Diamond Macro DFS 59202

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

DFS catalog number 59202.

Characteristics:

• shape: thin cone;
• diameter: 2.3 mm;
• Macro diamond: standard grit;
• revolutions: 15,000 - 30,000 rpm;
• application: application - chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

Milli-Micron Diamond DFS 54161

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

DFS catalog number 54161.

Characteristics:

• shape: pear;
• diameter: 6.0 mm;
• Milli Micron diamond: fine grain;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, porcelain.

Packaging:

• 1 pc.

DFS Super-Flexiflex Diamond Separator ⌀ 22mm

Super flexible double-sided separator with diamond coating for separating and contouring ceramics.

DFS catalog number 12222.

Characteristics:

• diameter: 22mm;
• thickness: 0.17mm;
• fill: fine, red stripe;
• revolutions: from 5' to 10000 rpm
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

Double sided separator 927/220

Double-sided separator with diamond coating mounted on a holder.

Characteristics:

• diameter 22x0.30mm.

Packaging:

• 1pc.

DFS Polishing Rubber Shaping Tool

An instrument for shaping polishing rubbers, restores the rubbers to the desired shape.

• The instrument is covered with a thick diamond coating.

Packaging:

• 1 pc.

EVE Universal rubber disc blue 22mm 1 piece

Flexible silicone polishing rubbers.

Designed for processing:

• porcelain;
• precious alloys;
• acrylic.

Characteristics:

• fine blue eraser, fine-grained;
• polishing to a mirror shine;
• recommended speed - 7,000- 10,000 rpm. max. 20,000 rpm;
• circle, size 22x3mm.

Packaging:

• 1 pc.

CeraMaster HP WH6 erasers, pack of 3

Silicone rubber cups filled with natural diamond particles for quick finishing and polishing of ceramic restorations.

Advantages:

• no polishing paste required;
• long-lasting durability;
• low heat generation.

Packaging:

• 3pcs.

Milli-Micron Diamond DFS 54102

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

DFS catalog number 54102.

Characteristics:

• shape: rounded cone;
• diameter: 3.0 mm;
• Milli Micron diamond: fine grain;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, porcelain.

Packaging:

• 1 pc.

DFS Rigidisc Diamond Separator ⌀20mm

A diamond-coated separator is used for precise cutting and separating of various prosthetic materials.

DFS catalog number 112024.

Thanks to its rigidity (Rigidisc), it allows for very straight and even cuts without the disc bending.

Characteristics:

• diameter: 20mm;
• thickness: 0.30mm;
• fill: medium, blue stripe;
• revolutions: from 3' to 5000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Application:

• separation of dental ceramics (cutting contact points, contouring);
• plaster separation (precise cutting of posts in split models);
• cutting metals (precious and non-precious alloys).

Packaging:

• 1 pc.

Panther Diamond paste for porcelain, lithium disilicate and zirconium 20g

Diamond paste for polishing zirconium, ceramic materials and lithium disilicate.

**Advantages::

• high quality surface finish (zirconium oxide);
• contains diamond particles of various sizes that enable effective and precise polishing of zirconium and other materials;
• allows you to achieve precise finishing of the zirconium surface, remove scratches, polish and obtain a smooth, shiny surface;
• extremely effective in the final stage of polishing.

Packaging:

• 1pc/20g

Panther Smooth Pre-Polishing Rubber for Porcelain, Glass Ceramics and Zirconium F055

Panter Smooth flame eraser 55mm for pre-contouring and polishing of ceramics based on zirconium oxide, lithium disilicate and feldspar.

Characteristics:

• medium grain;
• flame size ø 5.6 x 18mm;
• handpiece shaft;
• recommended operating speed min. 8000 - max. 20000.

Packaging:

• 1pc.

Panther Smooth Pre-Polishing Rubber for Porcelain, Glass Ceramics and Zirconium W170

Panter Smooth eraser disc 17mm for pre-contouring and polishing of ceramics based on zirconium oxide, lithium disilicate and feldspar.

Characteristics:

• medium grain;
• disc size ø 17 x 2.4mm;
• handpiece shaft;
• recommended operating speed min. 8000 - max. 20000.

Packaging:

• 1pc.

Panther soft goat hair brush 17x2mm

Goat hair brushes designed for polishing pressed ceramics, zirconium oxide and feldspar ceramics to obtain a smooth, shiny surface.

These brushes allow you to remove minor scratches, dullness or imperfections, and also add shine.

For use with Panther Paste diamond paste.

Packaging:

• 1pc.

Panther Porcelain, Glass Ceramic, and Zirconia Preparation Kit TCPSET#1

A set of rubber brushes and paste for smoothing, contouring and polishing ceramics based on zirconium oxide, lithium disilicate and feldspar.

Set composition:

• four purple Smooth collecting rubbers (flame, 15mm, 17mm, 26mm disc) recommended operating speed min. 8000 - max. 20000 rpm;
• four ecru erasers for final Gloss polishing (flame, 15mm, 17mm, 26mm disc) recommended operating speed min. 8000 - max. 20000 rpm;
• two soft brown goat hair brushes, diameter: 17 mm and 19 mm, recommended operating speed: min. 12,000 - max. 15,000 rpm;
• diamond polishing paste 20 ml.

Advantages:

• perfect shine in two steps;
• time saving thanks to two-stage work;
• well-protected surface and long product life;
• a shape tailored to every situation.

Packaging:

• set of 8 erasers, 2 brushes, 20ml paste.

Panther Smooth Pre-Polishing Rubber for Porcelain, Glass Ceramics and Zirconium L260

Panter Smooth eraser disc 26mm for pre-contouring and polishing ceramics based on zirconium oxide, lithium disilicate and feldspar.

Characteristics:

• medium grain;
• disc size ø 26 x 2mm;
• handpiece shaft;
• recommended operating speed min. 8000 - max. 20000.

Packaging:

• 1pc.

Milli-Micron Diamond DFS 54242

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

DFS catalog number 54242.

Characteristics:

• shape: thin cone;
• diameter: 1.6 mm;
• Milli Micron diamond: fine grain;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, porcelain.

Packaging:

• 1 pc.

Diamond Micro DFS 50214

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50214

Characteristics:

• shape: long flame;
• diameter: 3.0 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

Diamond Micro DFS 50181

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50181

Characteristics:

• shape: large sharp cone;
• diameter: 5.0 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

Diamond Micro DFS 50215

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50215.

Characteristics:

• shape: inverted hollow cone;
• diameter: 2.7 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

Diamond Micro DFS 50400

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50400.

Characteristics:

• shape: inverted cone;
• diameter: 4.0 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain

Packaging:

• 1 pc.

Diamond Micro DFS 50202

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50202

Characteristics:

• shape: thin cone;
• diameter: 2.3 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

Diamond Micro DFS 50620

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50620.

Characteristics:

• shape: small pear;
• diameter: 5.0 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

DFS TOTO-FLEX Diamond Separator ⌀ 22mm

Diamond-coated separator for separation and contouring.

DFS catalog number 112241.

Characteristics:

• diameter: 22 mm;
• dial thickness: 0.28mm;
• granularity: grave, embankment over the entire surface of the disc (marked with a green ring);
• operating parameters: recommended rotational speed is 10,000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Application:

• ceramics;
• plastics / acrylics;
• gypsum.

Packaging:

• 1 pc.

Diamond Superturbo DFS 53305

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp parts of the diamond emerge.

DFS catalog number 53305.

Characteristics:

• shield shape;
• diameter 10mm;
• Superturbo diamond, thick embankment;
• revolutions 15,000 - 30,000 rpm;
• application - chrome-cobalt;
• on the rectum.

Packaging:

• 1 pc.

Diamond superturbo DFS 53181

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp parts of the diamond emerge.

DFS catalog number 53181.

Characteristics:

• cone shape;
• diameter 5mm;
• Superturbo diamond, thick embankment;
• revolutions 15,000 - 30,000 rpm;
• application - chrome-cobalt;
• on the rectum.

Packaging:

• 1 pc.

Diamond Turbo DFS 55044

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

DFS catalog number 55044

Characteristics:

• shape: rounded cone;
• diameter: 4.0 mm;
• Turbo diamond: thick layer;
• revolutions: 15,000 - 30,000 rpm;
• application: application - chrome-cobalt, palladium.

Packaging:

• 1 pc.

Diamond Macro DFS 59625

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

DFS catalog number 59625.

Characteristics:

• shape: very large sharp pear;
• diameter: 8.0 mm;
• Macro diamond: standard grit;
• revolutions: 15,000 - 30,000 rpm;
• application: application - chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.

Diamond Micro DFS 50650

Sidia® synthetic diamonds are permanently embedded in a sintered metal matrix consisting primarily of bronze with additives such as manganese and other alloying metals.

The sintering process takes place at a temperature of approximately 700°C.

Thanks to their fully sintered diamond structure, Sidia® tools are characterized by exceptional durability and even wear, allowing for precise and long-lasting machining of ceramics, zirconium and prosthetic metals.

As the outer layer wears away, more sharp diamond particles emerge.

Catalog number DFS 50650.

Characteristics:

• shape: inverted cone;
• diameter: 6.0 mm;
• Micro diamond: fine grit;
• revolutions: 15,000 - 30,000 rpm;
• application: chrome-cobalt, palladium, porcelain.

Packaging:

• 1 pc.