Erkoflex foil ⌀ 125mm x 1.5mm 10 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• round, diameter 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkodur foil ⌀ 120mm x 0.6mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 0.6mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkodur foil ⌀ 120mm x 1.0mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 1.0 mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkodur foil ⌀ 120mm x 0.8mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 0.8mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkoflex foil ⌀ 120mm x 4.0mm 50 pieces

For making positioners, for duplicating training models, splints for athletes.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 4.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkoflex foil ■ 125mm x 125mm x 1.5mm 10 pieces

For making whitening and fluoridation splints, bite splints, protective splints (radiological guards), transfer splints for orthodontic brackets, positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• square 12xmm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil Ø 120mm x 1.0mm 100 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected with heat.

Packaging:

• 100pcs.

Erkoloc-Pro round foil Ø 120mm x 1.3mm 20 pieces

Erkoloc PRO foil 120x1.3mm.

Two-layer plate, soft/hard for comfortable bite splints, miniplastic and anti-grinding splints.

Characteristics:

• round Ø 120mm thickness 1.3mm;
• soft-hard;
• the hard layer is made of polyethylene terephthalate glycol (PETG) and can be combined with an autopolymerizer;
• the soft side is made of thermoplastic polyurethane (TPU);
• the outer surface is hard and easy to process, can be sanded or built up with a quick polymer.

Packaging:

• 20pcs

Erkoflex foil Ø 125 mm x 2.0 mm 10 pieces

For making splints, for duplicating demonstration models, for making protective splints (radiological protectors), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• round, diameter 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex Bleach foil Ø 120mm x 1.0mm 20 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• round, diameter 120 mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected with heat.

Packaging:

• 20pcs.

Erkoflex foil Ø 120mm x 2.0mm 50 pieces

For making splints for duplicating demonstration models, making protective splints (radiological protectors), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Folia Erkolen Ø 120mm x 1,0mm 20szt

Folia Erkolen 1,0mm.

Cechy:

• Średnica 120mm.
• Spalają się bez pozostałości.

Do wykonywania:

• Prowizorkek koron i mostów.
• Utrzymywaczy przestrzeni dla żelowatych środków terapeutycznych.

Opakowanie:

• 20szt.

Erkoflex foil ■ 125mm x 125mm x 2.0mm 10 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil Ø 120mm x 3.0mm 10 pieces

For making positioners, for duplicating training models, splints for athletes, protective splints (radiological protectors).

Characteristics:

• soft, Shore A hardness: 82;
• thickness 3.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil ■ 125mm x 125mm x 3.0mm 10 pieces

For making positioners, for duplicating training models, splints for athletes, protective splints (radiological protectors).

Characteristics:

• soft, Shore A hardness: 82;
• thickness 3.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil Ø 120mm x 2.0mm 10 pieces

For making splints, for duplicating demonstration models, for making protective splints (radiological protectors), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• round, diameter 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil Ø 120mm x 3.0mm 50 pieces

For making positioners, for duplicating training models, splints for athletes, protective splints (radiological protectors).

Characteristics:

• soft, Shore A hardness: 82;
• thickness 3.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkodur foil Ø 120mm x 0.5mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 0.5mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkoflex Bleach foil Ø 120mm x 1.0mm 100 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• round, diameter 120 mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 100pcs.

Erkodur foil Ø 120mm x 1.5mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 1.5mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

Erkodur foil Ø 120mm x 2.0mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 2.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

Erkoflex foil Ø 120mm x 1.5mm 50 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Outlet Erkoflex foil square 125 x 125 x 1.0mm 20 pieces (no outer box)

For making bleaching trays, fluoridation trays, duplicating demonstration models, making protective splints (radiological guards), orthodontic bracket transfer trays, and positioners.

Features:

• soft, Shore A hardness: 82;
• thickness 1.0mm;
• square 125mm x 125mm;
• made of ethylene-vinyl acetate (EVA);
• with insulating foil;
• does not bond with acrylic, can be adjusted with heat.

Packaging:

• 20 pcs.

Erkoflex foil Ø 120mm x 1.5mm 10 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkodur foil Ø 120mm x 3.0mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 3.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

Erkoflex Bleach foil ■ 125mm x 125mm x 1.0mm 100 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• square 125mm x 125mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected with heat.

Packaging:

• 100pcs.

Erkoflex foil ■ 125mm x 125mm x 3.0mm 50 pieces

For making positioners, for duplicating training models, splints for athletes, protective splints (radiological protectors).

Characteristics:

• soft, Shore A hardness: 82;
• thickness 3.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkoflex foil ■ 125mm x 125mm x2.0mm 50 pieces

For making splints, for duplicating demonstration models, for making protective splints (radiological protectors), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkoflex Bleach foil ■ 125mm x 125mm x 1.0mm 20 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• square 125mm x 125mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 20pcs.

Erkoloc PRO foil ■ 125mm x 125mm x 3.0mm 10 pieces

Erkoloc PRO foil 125x125x3.0mm.

Two-layer, soft/hard plate for comfortable, mini-plastic and anti-grinding bite splints.

Characteristics:

• Square 125mmx125mm.
• Soft-hard.
• The hard layer is made of polyethylene terephthalate-glycol (PETG) and can be combined with an autopolymerizer.
• The soft side is made of thermoplastic polyurethane (TPU).
• The outer surface is hard and easy to process, it can be sanded or built up with a quick polymer.

Packaging:

• 10 pcs

Erkodur foil ■ 125mm x 125mm x 1.0mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• square 125x125 mm;
• thickness 1.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkodur foil ■ 125mm x 125mm x 2.0mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• square 125x125 mm;
• thickness 2.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

Erkodur foil ■ 125mm x 125mm x 0.8mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• square 125x125mm;
• thickness 0.8 mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkodur foil ■ 125mm x 125mm x 3.0mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• square 125x125 mm;
• thickness 3.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

Erkoflex Bleach foil Ø 125mm x 1.0mm 100 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• round, diameter 125 mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 100pcs.

Erkodur foil ■ 125mm x 125mm x 1.5mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• square 125x125mm;
• thickness 1.5mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

Erkodur foil Ø 125 mm x 1.0 mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 125 mm;
• thickness 1.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkoflex foil ■ 125 mm x 125 mm x 4.0 mm 50 pieces

For making positioners, for duplicating training models, splints for athletes.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 4.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkoflex foil ■ 125mm x 125mm x 1.0mm 20 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 20pcs.

Erkodur foil ■ 125mm x 125mm x 0.6mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• square 125x125 mm;
• thickness 0.6mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkoflex foil ■ 125mm x 125mm x 1.5mm 50 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected with heat.

Packaging:

• 50pcs.

Erkoflex foil Ø 120mm x 4.0mm 10 pieces

For making positioners, for duplicating training models, splints for athletes.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 4.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex Bleach foil Ø 125mm x 1.0mm 20 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• round, diameter 125 mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 20pcs.

Erkoloc-Pro foil Ø 120mm x 4.0mm 10 pieces

Erkoloc PRO foil 120x4.0mm.

Two-layer, soft/hard plate for comfortable, mini-plastic and anti-grinding bite splints.

Characteristics:

• Round 120mm.
• Soft-hard.
• The hard layer is made of polyethylene terephthalate-glycol (PETG) and can be combined with an autopolymerizer.
• The soft side is made of thermoplastic polyurethane (TPU).
• The outer surface is hard and easy to process, it can be sanded or built up with a quick polymer.

Packaging:

• 10 pcs

Erkoflex foil Ø 120 mm x 1.0 mm 20 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 20pcs.

Erkoflex foil ■ 125mm x 125mm x 1.0mm 100 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 100pcs.

Erkoloc-Pro foil Ø120mm x 2.0mm 10 pieces

Erkoloc PRO120x 2.0mm foil.

Two-layer, soft/hard plate for comfortable, mini-plastic and anti-grinding bite splints.

Characteristics:

• Round 120mm.
• Soft-hard.
• The hard layer is made of polyethylene terephthalate-glycol (PETG) and can be combined with an autopolymerizer.
• The soft side is made of thermoplastic polyurethane (TPU).
• The outer surface is hard and easy to process, it can be sanded or built up with a quick polymer.

Packaging:

• 10 pcs

Erkoloc-Pro foil Ø120mm x 3.0mm 10 pieces

Erkoloc PRO foil 120x3.0mm.

Two-layer, soft/hard plate for comfortable, mini-plastic and anti-grinding bite splints.

Characteristics:

• Round 120mm.
• Soft-hard.
• The hard layer is made of polyethylene terephthalate glycol (PETG) and can be combined with an autopolymerizer.
• The soft side is made of thermoplastic polyurethane (TPU).
• The outer surface is hard and easy to process, it can be sanded or built up with a quick polymer.

Packaging:

• 10 pcs

Erkoloc-Pro ■ 125mm x 125mm x 2.0mm 10 pieces

Erkoloc PRO foil 125x125x2.0mm.

Two-layer, soft/hard plate for comfortable, mini-plastic and anti-grinding bite splints.

Characteristics:

• Square 125mmx125mm.
• Soft-hard.
• The hard layer is made of polyethylene terephthalate glycol (PETG) and can be combined with an autopolymerizer.
• The soft side is made of thermoplastic polyurethane (TPU).
• The outer surface is hard and easy to process, it can be sanded or built up with a quick polymer.

Packaging:

• 10 pcs

Erkoflex foil ■ 125mm x 125mm x 4.0 mm 10 pieces

Erkoflex foil 125x125x4.0mm.

For making positioners, for duplicating training models, splints for athletes.

Characteristics:

• Soft.
• Square 125mmx125mm.
• Made of ethylene vinyl acetate (EVA).

Packaging:

• 10 pcs.