Formlabs Soft Tissue Starter Pack

Soft tissue starter pack.

• Thanks to the Soft Tissue Kit, you can print elements imitating soft tissues. The material is used to print flexible gingival masks for use in conjunction with rigid dental models to aid in the planning of implant procedures. The Soft Tissue set consists of a flexible base resin (Flexible 80A) and pigments that allow you to obtain various degrees of color saturation, from dark to light pink shades. Magenta pigment, yellow pigment and white pigment can also be purchased separately.

Packaging:

• 1set

Formlabs Dental Model V3 1L 3D printer resin

Designed for crown and bridge models with replaceable dies. Dental Model Resin is a very precise resin with high accuracy.

Version 3:

• This version of Model Resin is a reformulation of the previous version.
• With the new V3 resin, you can print even more accurate models in half the time.
• Supports printing resolutions: 100 and 50 microns.
• Requires Form 3 Resin Tank V2.1 or later for Form 3B and Form 2 Resin Tank LT for Form 2.

Packaging:

• 1l

Formlabs Precision Model (Form4) 1l 3D printer resin

The next-generation precision model printing resin, developed to take advantage of the new Form 4 ecosystem, is a high-accuracy material. Creates beautiful models with clear edges thanks to high opacity, beige color and smooth, matte finish.

Precision Model Resin is the next generation of model resin for the new Form 4 series of printers to print three times faster while offering improved accuracy and aesthetics.

Advantages:

• Prints eight models in just 90 minutes.
• 5-minute cycle in the washer.
• 5-minute hardening at room temperature.

Compared to Model Resin V3, Precision Model Resin is:

• Greater accuracy - better resolution and consistency of small elements.
• Speed - Designed to take advantage of the new Form 4 ecosystem for three times faster printing.
• A more opaque and matte aesthetic to better show off the edges.

Packaging:

• 1l

Formlabs Resin Pump

Formlabs resin pump.

The resin pumping system for Form 3 series stereolithography (SLA) 3D printers smoothly delivers resin from a 5 liter resin package through the pumping system directly to the printer tank. Reduce waste by 86%.

Packaging:

• 1 piece

Formlabs resin Dental LT Clear V2 (Form 4) 1L

Dntal LT Clear Resin V2 is a long-term biocompatible material for printing affordable, high-quality hard occlusal splints and protectors.

Characteristics:

• highly durable and crack-resistant material;
• resistant to discoloration due to time;
• high aesthetics and durability.

Technical data:

• tensile strength: 52 MPa;
• tensile modulus: 2080 MPa;
• elongation: 12%;
• modulus of elasticity in bending: 2.3 GPa;
• impact strength (without IZOD notch): 449 J/m;
• Shore D hardness: 78D.

Packaging:

• 1000ml

Formlabs IBT Flex V1 resin (Form 4) 1L

BT Flex Resin is a biocompatible Class I material with increased flexibility, strength and transparency that guarantees optimal clinical results while providing an excellent patient experience and the smooth and precise transfer of orthodontic brackets and composite restorative materials.

Characteristics:

• increased elongation and elasticity;
• hassle-free intraoral placement and removal, ensuring quick and accurate placement of brackets and perfect seating of templates on the teeth;
• optimized translucency and color;
• This new formula allows for easy visualization of important elements such as brackets, composite filling materials and teeth.
• high printing accuracy and predictable results;
• certified biocompatible, FDA registered.

Material properties:

• tensile strength: 7.2 MPa;
• tensile modulus: 8 MPa;
• elongation at break: 135%;
• Shore A hardness: 77 - 80 A;
• transparency (2mm): 85%;
• Chemical disinfection: 70% isopropyl alcohol for 5 minutes.

Packaging:

• 1000ml

Formlabs Dental LT Comfort resin (Form 4) 1L

Dental LT Comfort Resin is a biocompatible resin for printing flexible occlusal splints as well as bruxism guards and teeth whitening splints.

Characteristics:

• the rails are easy to polish, which allows for high optical transparency;
• greater wearing comfort and better durability of the rails;
• the rails are resistant to impact and wear.

Technical data:**

• tensile strength: 29.1 MPa;
• tensile modulus: 994 MPa;
• elongation: 33%;
• bending strength: 21 MPa;
• flexural modulus: 643 MPa;
• notched Izod: 98 J/m;
• Shore D hardness: 75D.

Packaging:

• 1000ml

Formlabs Fast Model V1 (Form 4) 1L 3D Printer Resin

Formlabs' fastest resin, prints at speeds over 100 mm per hour.

It allows you to print models in minutes or large prototypes in less than two hours.

Printer compatibility: Form 4, Form 4B, Resin Tank Form 4, Form 4 Build Platform, Form 4 Build Platform Flex.

Application:

• prosthetic models;
• orthodontic models.

Color:

• Gray

Advantages:

• fast Model is the next generation of Draft Resin, designed to take advantage of the new Form 4 ecosystem;
• faster - designed to leverage the new Form 4 ecosystem for three times faster printing;
• stronger and stiffer - 45% higher strength and modulus of elasticity;
• more opaque and matte color.

Mechanical properties of Fast Model resin:

Cure at room temperature for 5 minutes:

• ultimate tensile strength 55 MPa;
• tensile modulus 2500 MPa;
• elongation at break 15%;
• bending strength 98 MPa;
• modulus of elasticity 2600 MPa;
• notched isod 30 J/m;
• heat deflection temperature at 0.45 MPa 58 °C.

Additional curing at 60 °C for 15 minutes:

• ultimate tensile strength 62 MPa;
• tensile modulus 2700 MPa;
• elongation at break 11%;
• bending strength 106 MPa;
• modulus of elasticity 2700 MPa;
• Izod notched 37 J/m;
• heat deflection temperature at 0.45 MPa 76 °C.

Packaging:

• 1l

Formlabs Surgical Guide SG 1L 3D printer resin

A resin with first class biocompatibility, intended for dentists to create precise surgical templates. Prints made of this material can be sterilized in an autoclave and are allowed to come into contact with skin and tissues. The material was created and rigorously tested to print precise templates and guides used in implant procedures. After final processing, prints made of this material can become fully transparent for better positioning.

Recommended printing on a layer of 100 or 50 micrometers (Form 2) and 100 micrometers (Form 3B).

Meets ISO standards:

• EN ISO 10993-5:2009 (non-cytotoxic)
• ISO 10993-10:2010/(R)2014 (non-sensitizing)
• ISO 10993-10:2010/(R)2014 (non-irritating)
• EN ISO 13485:2016
• EN ISO 14971:2012

Packaging:

• 1 liter

Formlabs Dental LT ClearV2 1L 3D printer resin

Class IIa biocompatible resin with high peel and wear resistance, making Dental LT Clear ideal for splints, attachments and other direct orthodontic devices. Thanks to the transparent color, high optical transparency is achieved for beautiful final products.

• The material has been assessed according to ISO 10993-1:2018.

Application:

• Occlusal splints.
• Retention appliances.
• Occlusal overlays.
• Surgical splints and guides.
• Fastening elements.
• Other orthodontic accessories.

Material properties:

• Bending modulus 2300 MPa.
• Elongation at break 12%.
• Shore hardness: 78D.
• Color transparent.

Packaging:

• 1 liter

Formlabs Castable WAX 1L 3D printer resin

Resin for jewelry and dental prosthetics.

• Does not require light polymerization after printing.

The original Castable Wax Resin is intended for the production of lost models in foundry. The material contains 20% wax and, thanks to its properties, does not leave any residue after firing and reflects the contour of the form well. Suitable for precision casting, it allows you to reproduce complex surfaces without visible layer lines. After printing, the models do not require additional hardening.

Also recommended for dental prosthetics:

• Crowns.
• Bridges.
• Partial dentures.
• Skeletons.

Packaging:

• 1L

Formlabs Standard 1L 3D printer resin

The printing material in SLA technology is a liquid photopolymer resin hardened with a laser beam. Formlabs standard materials are the most universal resins for all applications. Strandard resins maintain high model accuracy without the risk of losing strength. Stiffness, durability, the ability to produce advanced details and the final smoothness of the print contribute to the wide use of the resin both in various industries and in medicine.

Colors:

• Transparent (Clear)
• White
• Gray (Grey)
• Black

Application:

• Conceptual models and prototypes.
• Transparent elements.
• Models requiring a smooth surface.

Physical data:

• Tensile strength 63 PMa.
• Elongation at break 6%
• Shore hardness D75.
• Modulus of elasticity 2.2 GPa.

Packaging:

• 1l

Formlabs Maintenance Kit

Spare hoses for the resin pumping system. Over time, pump performance will deteriorate, resulting in longer filling times. The resin pumping system tubing should be replaced every 6 months or when the resin type changes. This kit includes both an internal tube for the resin pump and a transfer tube to connect the resin pump to the 5 liter resin container.

Packaging:

• 1 set of hoses

Formlabs Temporary CB 1L 3D printer resin

Material used for the production of temporary crowns, onlays, veneers and bridges in natural enamel color. The printing material requires the use of a stainless steel worktable. Supported layer height: 50 micrometers. Curing required.

Meets ISO standards:

EN ISO 10993-5:2009 (non-cytotoxic)

ISO 10993-10:2010/(R)2014 (non-irritating)

ISO 10993-10:2010/(R)2014 (non-sensitizing)

ISO 10993-3:2014 (non-genotoxic)

ISO 10993-1:2009 (non-toxic)

Temporary CB Resin is a medical device as defined in the EU Medical Devices Directive (93/42/EEC) and Section 201(h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with temporary CB resin have been assessed in accordance with ISO 10993-1: 2018 (Part 1: Assessment and testing as part of the risk management process) and ISO 7405: 2009/(R) 2015 (Dentistry - Biocompatibility assessment).

Technical data:

• Density: 1.4 - 1.5 g/cm3

  • Viscosity: 2500 - 6000 MPa*s

  • Bending strength (after hardening) 2,3,4: ≥ 100MPa

Packaging:

• 1l

Formlabs Denture Base 1L for denture plates, resin for 3D printer

Biocompatible resin for printing complete dentures. Perfectly fitting dentures faster and cheaper. Long-term, biocompatible Class IIa resins enable dentists and technicians to produce complete dentures using 3D printing technology.

Denture Base resin has been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins received a biocompatibility class confirmed by the following standards: EN-ISO 10993-1:2009/ AC:2010:

• Non-mutagenic.
• Non-cytotoxic.
• It does not cause erythematous or edematous reactions.
• Does not cause sensitization.
• It does not cause systemic toxicity.

ISO standards for Denture Base: - EN-ISO 20795-1:2013 (Dentistry – Base Polymers – Part 1: Denture Base Polymers)

Colors:

• LT (Light Pink)
• OP (Original Pink)
• RP (Reddish Pink)

• DP (Dark Pink)

• Supported layer height: 50 micrometers.

• Curing required.

Packaging:

• 1l

Formlabs Permanent Crown resin (From3) 1L

Permanent Crown resin is a dental, biocompatible 3D printing material using SLA technology.

The material in the natural color of tooth enamel is suitable for the production of permanent, full-contour prosthetic restorations.

Permanent Crown resin is a hybrid material with a ceramic filler. Prints feature excellent fit, low water absorption and a smooth finish.

Crowns made from this material have a low tendency to age, discolour or accumulate plaque.

Permanent Crown resin is available in 4 VITA shades (A2, A3, B1, C2).

Application:

• permanent single crowns;
• inserts;
• outlays
• veneers.

The resin is a medical device as defined in the Medical Device Directive (93/42/EEC) in the EU and in Section 201 (h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with temporary CB resin have been evaluated according to ISO 10993-1:2018 (Part 1: Evaluation and testing as part of the risk management process) and ISO 7405:2009/(R)2015 (Dentistry - Assessment of biocompatibility).

• Printing on a Stainless Steel Build Platform

Packaging:

• 1 liter

Formlabs Premium Teeth HT resin (Form 4) 1kg

Premium Teeth Resin is a biocompatible nano-ceramic filled material with improved aesthetics, mechanical properties and proven durability, ensuring optimal clinical performance.

3D printing:

• prosthetic teeth;
• temporary restorations on implants (All-on-X);
• temporary single elements (crowns, inlays, onlays and veneers);
• and bridges to seven elements.

Technical data:

• SLA technology;
• colors A2, A3, B1, BL;
• bending strength 155.0 MPa;
• flexural modulus 4300.0 MPa;
• Shore hardness 90.0 D;
• opacity at 1 mm thickness 56%.

Characteristics:

• best-in-class mechanical properties;
• Nanoceramic filled resin with industry-leading flexural strength while maintaining fracture resistance.
• natural aesthetics;
• creates realistic fills with optimized color, transparency and opalescence;
• proven durability;
• Rigorously tested to ensure the material is resistant to wear, staining and abrasion and retains its original properties over time;
• simplified workflow;
• accurate, high-quality prints with reduced post-processing time and easy polishing.

Packaging:

• 1kg