Small plaster separator

Double-sided separator with diamond coating.

For cutting plaster models.

Description:

• diameter 30mm;
• diamond grit acc. to ISO 514 (60/40 microns) - Fine;
• diamond coating according to ISO 524 (100/80 microns) - Coarse.

Packaging:

• 1pc.

DFS Rigidisc Diamond Separator ⌀20mm

A diamond-coated separator is used for precise cutting and separating of various prosthetic materials.

DFS catalog number 112024.

Thanks to its rigidity (Rigidisc), it allows for very straight and even cuts without the disc bending.

Characteristics:

• diameter: 20mm;
• thickness: 0.30mm;
• fill: medium, blue stripe;
• revolutions: from 3' to 5000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Application:

• separation of dental ceramics (cutting contact points, contouring);
• plaster separation (precise cutting of posts in split models);
• cutting metals (precious and non-precious alloys).

Packaging:

• 1 pc.

DFS Plaster Cut saw blade, blade diameter 75mm, hole diameter 20mm

Plaster disc with diamond edge.

DFS catalog number 1575202.

Description:

• use in the range from 3 to 5000 rpm;
• hole diameter: 20 mm;
• outer diameter: 75 mm;
• disc thickness: 0.35 mm.

Packaging:

• 1 pc.

Plaster Cut saw blade, inner diameter 16mm/outer diameter 85mm

Plaster disc with diamond edge.

Description:

• use in the range of 3 to 5000 rpm;
• hole diameter:16 mm;
• outer diameter: 85 mm;
• disc thickness: 0.3 mm.

Packaging:

• 1pc.