The IP Clean Hydro steam generator is a German steam generator with high power and automatic control of the water level in the heating tank. The device recognizes a low water level by itself and draws it from the included 5-liter canister.

• IP Clean Hydro works with ordinary "tap" water and thanks to the filters installed in the canister, the water drawn into the device is clean and descaled.

• A modern heater mounted under a stainless steel tank quickly boils water and generates steam up to 5 BAR. The heater does not have direct contact with water, therefore it is not possible to burn it through too low a water level in the heating tank.

• In IP Clean Hydro, we can use the function of dry and wet steam with a temperature of up to 170C and its pressure can be adjusted with a knob on the front of the device.

• In the case of a calcified heating tank, we can clean it using ordinary citric acid.

Advantages:

• Automatic water intake from a separate canister.
• Always ready to work - the system with a canister allows automatic filling of water while the device is in use.
• Dry and wet steam function.
• Possibility to regulate the pressure of the outgoing steam
• Acoustic signal when the minimum level in the canister is exceeded.
• Casing and boiler made of stainless steel.
• The device has a practical drain screw, which facilitates cleaning and descaling.

Technical data:

• Sizes 24.0 x 35.0 x 38.0 cm.
• Power supply 230V, 50/60Hz.
• 24V handpiece
• Power consumption 1500W
• Tank capacity 4.8L.
• 3-4L reserve tank.
• 5L canister
• Pressure approx. 5 bar.
• Weight 15 kg.
• Steam temperature 170°C

Packaging:

• IP Clean Hydro complete with canister.
• Funnel and pin for hanging the steam gun.

Star steam generator device producing saturated steam. The high pressure of 4 bar and a temperature of 150 ° C enables excellent cleaning of various objects or e.g. wax residues on models, dirt in inaccessible work areas, or soldering residues. Grease, sticky wax, solvents and plaster residues are gently and quickly removed without chemical additives.

Advantages:

• Adjustment of the degree of humidification and steam pressure.
• Corrosion-resistant tank made of stainless steel.
• No water connection required thanks to manual filling.

Technical data:

• Power supply 230/50Hz.
• Power consumption 1100W
• Working pressure 0-4 bar.
• Tank capacity 3.5L
• Weight 8 kg.
• Dimensions WxHxD)) 280 / 290 + 40 / 330 mm.
• Manual filling.
• 12 months warranty.

Packaging:

• 1 piece.

Reliable water softening and filtering system, specially adapted to the POWER 2 steamer. The system provides optimal protection for the POWER steamer, increasing its efficiency, reliability and durability.

Renfert catalog number 18460100

Advantages:

• Affordable and advanced water softening/filtering technology that is usually only available in large and expensive systems.
• It supplies the POWER 2 evaporator with clean, calcium-reduced water.
• Easy, compact installation (free-standing or wall-mounted) that can be completed in minutes.
• Simple operation and monitoring (visual and acoustic signal) using a flow sensor with an OLED display.
• Quick replacement of filter cartridges in seconds - remove, insert, that's it.
• Durable filter cartridges.
• Venting and rinsing directly at the filter head, without disconnecting the pipes (using automatic inlet and outlet shut-off valves).
• Automatic replacement of all gaskets between head and cartridge with each cartridge change.

Packaging:

• POWER Steamer water softener, filter head with rinsing hose, rinsing hose, connection hose, 2 adapters 3/4" - 3/8", gaskets, M filter insert for POWER steamer softener, flow meter for POWER steamer softener, user manual/ Quick Start Guide, test strips for determining water hardness

• Power STEAMER I - a novelty on the market.
• Renfert catalog number 18450000

Advantages:

• Flexible location selection with manual filling.
• The heater is built into the boiler wall, which prevents limescale deposits on it and prevents it from burning out due to too little water in the tank.
• High operational reliability thanks to real-time calcification rate.
• Easy cleaning of the pressure tank thanks to the extra-large service opening.
• Continuous and effective cleaning performance thanks to the power of up to 2000 W and the working pressure of 4.5 bar combined with the innovative technology of steam nozzles.
• Safe and comfortable steam cleaning thanks to the ergonomic handle (the housing safely discharges the electrostatic charge).
• Wall mounting possible with optional wall bracket.

Technical data;

• Permissible mains voltage - 220-240 V
• Permissible mains frequency - 50/60 Hz
• Power consumption - 2000 W
• The volume of the pressure tank - 4 l
• Volume (recommended filling amount) - 2.8 l
• Volume (maximum filling amount) - 3 l
• Working pressure - 4.5 bar
• Dimensions (W x H x D) - 370 x 422 x 350 mm
• Weight (empty) - ~9.5 kg
• 36 months warranty

Packaging:

• 1 steam cleaner,
• 1 tank cap,
• 1 quick start guide,
• 1 service plug tool,
• 1 sealing kit

Power STEAMER II - Steam generator with automatic filling. New on the market. It is recommended to buy a Power steamer water softner for the device (mikran number 1451)

Renfert catalog number 18460000

Advantages:

• The heater is built into the boiler wall, which prevents limescale deposits on it and prevents it from burning out due to too little water in the tank.
• Thanks to the mains water connection and the integrated pump, the pressure tank is filled automatically and ensures that steam is always available.
• High operational reliability and reliability with real-time calcification rate.
• Easy cleaning of the pressure tank thanks to the extra-large service opening.
• Continuous and effective cleaning performance thanks to the power of up to 2000 W and the working pressure of 4.5 bar combined with the innovative technology of steam nozzles.
• Steam available at all times - even during intensive continuous operation - thanks to automatic filling via mains water connection and integrated pump.
• Optimum control by displaying the current operating pressure via a pressure gauge.
• Significantly reduce the amount of effort required for rinsing, cleaning and descaling the pressure tank thanks to the effective rinsing program.
• Safe and comfortable steam cleaning thanks to the ergonomic handle (the housing safely discharges the electrostatic charge).
• Easy to fill with water and descaling thanks to the handy funnel-shaped refills.
• Wall mounting possible with optional wall bracket.

Technical data:

• Permissible mains voltage - 220-240 V
• Permissible mains frequency - 50/60 Hz
• Power consumption - 2000 W
• The volume of the pressure tank - 4 l
• Volume (recommended filling amount) - 2.8 l
• Volume (maximum filling amount) - 3 l
• Working pressure - 4.5 bar
• connection pressure. - 1-5 bar
• Dimensions (W x H x D) - 370 x 422 x 350 mm
• Weight (empty) - ~10.1 kg.
• 36 months warranty.

Packaging:

• 1 steam cleaner
• 1 tank cap
• 1 quick start guide
• 1 service nut tool
• 1 sealing kit

• Power Steamer I and II steam generator descaler is the perfect solution for effective and gentle descaling.
• Renfert catalog number 18450100

Benefits:

• Descaling that is both effective and gentle on the material - the formula is specially adapted to the aluminum pressure tank (including corrosion protection).
• Descaling much faster than standard commercial descaling solutions.

Step by step:

• Unplug the device and let it cool down
• Rinse the pressure tank with water and a cleaning brush
• Close the service hole
• Fill the pressure tank with 1 liter of water and then add 1 liter of Renfert POWER descaler
• After 15 minutes, add another 0.6-0.8 l of water. If foam appears, continue filling only after the foam has subsided
• Leave the descaling solution for 2-4 hours for light soiling and 8-14 hours for heavy soiling.
• Open the service port and drain the descaling solution
• The used descaling solution can be poured down the drain if it is highly diluted
• Rinse the pressure tank several times with water and clean with a brush

Packaging:

• 1l

• Steam generator VP-Mini
• Small and easy to use steam generator.
• For use in laboratories and dental offices

Technical data:

• 1000W power
• Pressure max 3 bar
• Tank capacity 2 liters.
• 12 months warranty

Packaging:

• 1 piece.

Easy-to-use steam generator from the Italian company Effegi, perfect for any prosthetic laboratory. It has a separate water tank so you don't have to wait for the device to cool down to fill it with water.

Attention:

• Fill the tank with demineralized water.

Benefits:

• It does not require connection to the water network, as it has its own tank.
• After 10 minutes from switching on, the device is ready for use.
• A yellow indicator light signals the need to refill water in the tank.
• 3-button gun (blue hot water, blue/red steam/water mix, red steam)

Technical data:

• Voltage 230V
• Frequency 50HZ
• Power Consumption 1950W
• max. operating temp. 135 degrees C
• Tank capacity 2.0 dm3
• Radiator capacity 2.2 dm3
• Water consumption 0.2 l/min
• max. working pressure0.4 MPa
• The set pressure of the safety valve is 0.55 MPa
• Height 41 cm
• Width 34cm
• Depth 33 cm
• Net weight - 11 kg

Packaging:

• 1 piece

Steam generating device with a maximum pressure of 4 bar. Compact, intended for connection to the water network. The housing is made of varnished stainless steel, the cover is made of varnished aluminum.

Advantages:

• control lamps signaling operation
• the pressure gauge allows you to control the pressure in the boiler
• dry steam outlet button
• dry steam nozzle
• reset button to resume the cycle when the pump protection has tripped
• gun operating button
• safety pistol, possibility of working both on the right and on the left side, ergonomic, made of special heat-resistant material
• components - a copper boiler with a capacity of 3.6 l, boiler insulation using fiber resistant to 500 degrees C, casing made of stainless, painted steel, copper pipes, brass fittings, safety valve numbered and set to 5.5 bar.

Technical data:

• Voltage - 230 V
• Frequency - 50 Hz
• Power consumption - 1950 W
• Maximum working temperature - 135 degrees C
• Heater capacity - 3.6 dm3
• Water consumption - 0.50 l / min
• Maximum working pressure - 0.4 MPa
• Safety valve setting - 0.55 MPa
• Noise level - 81.9 dB (A)
• Degree of protection - X3 IP
• Height - 360 mm
• Width - 310 mm
• Depth - 300 mm
• Weight - 16 kg.

Package:

• 1 piece.

Steam generator VK100 The newest compact steam generator from Effegi Brega. 1900 W power, 4 bar pressure. Perfect for any laboratory.

Convenient to use steam generator, perfect for every prosthetic laboratory. It has a separate water tank (we do not fill the boiler) so you do not have to wait for the device to cool down to fill it.

The use of a separate small boiler also allows for faster readiness of the device for operation, energy saving and extends the life of the device because the water tank is not constantly kept under high pressure. [Contrary to the Effega Brega, in the older generation chillers the entire multi-liter water tank is heated and pressurized].

It does not require connection to the water network, because it has its own tank, the device is ready for use after 10 minutes from switching on

Technical data of the VK100:

• Power supply: 230 V / 50Hz
• Power: 1900 W
• Maximum working temperature: 135 ° C
• Tank capacity: 2.2 l
• Water consumption: 0.2 l / min
• Maximum working pressure: 4 bar
• Pressure set at the safety valve: 5.5 bar
• Maximum noise level (EN- 3746-LpA): 81.9 dB (A)
• IP protection: X3 IP
• Dimensions: W x D x H: 24 x 32 x 40 cm
• Weight: 10 kg

Package:

1 piece

Steam generator Vk 400.

Steam generating device with a maximum pressure of 8 bar. Compact, intended for connection to the water network. The housing is made of varnished stainless steel, the cover is made of varnished aluminum.

Advantages:

• control lamps signaling operation
• the pressure gauge allows you to control the pressure in the boiler
• dry steam outlet button
• dry steam nozzle
• reset button to resume the cycle when the pump protection has tripped
• gun operating button
• safety pistol, possibility of working both on the right and on the left side, ergonomic, made of special heat-resistant material
• components - a copper boiler with a capacity of 4.8 l, boiler insulation using fiber resistant to 500 degrees C, casing made of stainless, painted steel, copper pipes, brass fittings, safety valve numbered and set to 10 bar.

For the correct operation of the device, it is recommended to use a water softener:

• PROMOTION when buying a generator, water softener for FREE!

Technical data:

- Voltage - 230 V - Frequency - 50 Hz - Power consumption - 1950 W - Maximum operating temperature - 170 degrees C - Heater capacity - 4.8 dm3 - Water consumption - 0.85 l / min - Maximum operating pressure - 0.8 MPa - Safety valve setting - 1.0 MPa - Noise level - 84.4 dB (A) - Protection class - X3 IP - Height - 340 mm - Width - 320 mm - Depth - 320 mm - Weight - 17 kg.

Package:

• 1 piece.

Steam generator IP Clean Six Compact steam generator with high power and a large tank.

Technical data:

• 1500 W power
• Max pressure 5 bar
• Tank capacity 6 liters

Package:

• 1 piece.