Double-sided separator S 929/220

Double-sided separator with diamond coating mounted on a holder.

Characteristics:

• very flexible.
• diameter 22x0.10mm.

Packaging:

• 1pc.

Double sided separator 929/220

Double-sided separator with diamond coating mounted on a holder.

Size:

• diameter 22x0.17mm;
• two-sided marginal embankment;
• flexible.

Packaging:

• 1pc.

Double sided separator 928/220

Double-sided separator with diamond coating over the entire surface, mounted on a holder.

Size:

• diameter 22x0.30mm.
• embankment over the entire surface, two-sided.

Packaging:

• 1pc.

DFS TOP-FLEX Diamond Separator ⌀ 19mm

Flexible separator for separating and contouring porcelain.

DFS catalog number 141921.

Characteristics:

• diameter: 19mm;
• thickness: 0.10mm;
• fill: superfine, yellow stripe;
• revolutions: from 3' to 5000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

Diamond separator without handle

Separator with diamond embankment.

Description:

• diameter 22mm;
• diamond coating according to ISO 514 (60/40 microns) - fine;
• diamond coating according to ISO 524 (100/80 microns) - coarse.

Packaging:

• 1pc.

DFS Super-Flexiflex Diamond Separator ⌀ 22mm

Super flexible double-sided separator with diamond coating for separating and contouring ceramics.

DFS catalog number 12222.

Characteristics:

• diameter: 22mm;
• thickness: 0.17mm;
• fill: fine, red stripe;
• revolutions: from 5' to 10000 rpm
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

Double sided separator 927/220

Double-sided separator with diamond coating mounted on a holder.

Characteristics:

• diameter 22x0.30mm.

Packaging:

• 1pc.

DFS Rigidisc Diamond Separator ⌀20mm

A diamond-coated separator is used for precise cutting and separating of various prosthetic materials.

DFS catalog number 112024.

Thanks to its rigidity (Rigidisc), it allows for very straight and even cuts without the disc bending.

Characteristics:

• diameter: 20mm;
• thickness: 0.30mm;
• fill: medium, blue stripe;
• revolutions: from 3' to 5000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Application:

• separation of dental ceramics (cutting contact points, contouring);
• plaster separation (precise cutting of posts in split models);
• cutting metals (precious and non-precious alloys).

Packaging:

• 1 pc.

DFS TOTO-FLEX Diamond Separator ⌀ 22mm

Diamond-coated separator for separation and contouring.

DFS catalog number 112241.

Characteristics:

• diameter: 22 mm;
• dial thickness: 0.28mm;
• granularity: grave, embankment over the entire surface of the disc (marked with a green ring);
• operating parameters: recommended rotational speed is 10,000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Application:

• ceramics;
• plastics / acrylics;
• gypsum.

Packaging:

• 1 pc.

DFS SPIROFLEX Diamond Separator ⌀ 22mm

Separator with a spiral diamond coating for processing ceramics, composites, and acrylic.

DFS catalog number 122291.

Characteristics:

• diameter: 22mm;
• thickness: 0.17mm;
• fill: fine, red stripe;
• revolutions: from 5' to 10000 rpm
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

DFS SPIROFLEX Diamond Separator ⌀ 22mm

Separator with spiral diamond coating for ceramics, composites and acrylic.

DFS catalog number 112281.

Characteristics:

• diameter: 22mm;
• thickness: 0.19mm;
• embankment: grave, green stripe;
• revolutions: from 5' to 10000 rpm
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

DFS SPIROFLEX Diamond Separator ⌀ 22mm

Separator with spiral diamond coating for ceramics, composites and acrylic.

DFS catalog number 122271.

Characteristics:

• diameter: 22mm;
• thickness: 0.10mm;
• fill: superfine, yellow stripe;
• revolutions: from 5' to 10000 rpm
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

DFS Diamond Separator MINIDISC ⌀13mm

Flexible MINIDISC diamond disc for separating and contouring ceramics and composites.

Super-fine grain minimizes the risk of ceramic cracking and allows for a very smooth surface already at the contouring stage.

DFS catalog number 191321.

Characteristics:

• diameter: 13mm;
• thickness: 0.10mm;
• diamond embossment: superfine, yellow stripe, dial entirely covered with diamond embossment;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

DFS FLEXIFLEX Diamond Separator ⌀ 22mm

Super flexible, double-sided separator for separating and contouring ceramics.

DFS catalog number 112221.

Characteristics:

• diameter: 22mm;
• thickness: 0.19mm;
• embankment: grave, green stripe;
• operating speed: from 5 to 10,000 rpm.
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

TOP-FLEX diamond separator 0.10x22mm

Flexible separator for separating porcelain and shaping contours.

Characteristics:

• mounted on a mandrel;
• diameter 22mm;
• thickness 0.10mm;
• yellow stripe.

Packaging:

• 1 pc.

DFS SEPAFLEX diamond separator ⌀ 22mm

Diamond-coated separator with holes, for ceramics and composites.

DFS catalog number 182221.

Characteristics:

• diameter: 22mm;
• thickness: 0.17mm;
• fill: fine, red stripe;
• operating range: 3'- 5000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

DFS Plexoflex Diamond Separator ⌀ 22mm

PLEXOFLEX separator ideal for delicate separation and contouring of porcelain.

DFS catalog number 192221.

Characteristics:

• diameter: 22 mm;
• thickness: 0.22mm;
• fill: fine, red stripe;
• oblique holes in the shield;
• revolutions: from 3' to 5000 rpm
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.;

Packaging:

• 1 pc.

DFS Sidia Flex Diamond Separator ⌀ 20mm

A disc coated on both sides with sintered diamond, for separating porcelain and zirconium oxide.

DFS catalog number 182021.

Characteristics:

• dial diameter: 20 mm;
• thickness: 0.15mm;
• finish: full diamond, superfine, yellow stripe;
• operating range: 3' - 5000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

Bi-Flex porcelain separator with diamond coating

Bi-Flex - porcelain separator with diamond filling

Renfert catalog number 271000

Advantages:

• highly flexible porcelain separator, coated on both sides with diamond grit;
• a fine diamond coating that allows you to gently shape and separate ceramics.

Technical data:

• diameter 22mm;
• thickness 0.15mm;
• max. speed 15,000/1min.

Packaging:

• 1pc.

Ultracut diamond separator

Ultracut separator ideal for separating porcelain.

Renfert catalog number 730000

Advantages:

• increased durability due to sintered diamond layer;
• high flexibility;
• slight grinding trace thanks to the dense diamond coating.

Technical data:

• diameter 20mm;
• thickness 0.15mm;
• maximum operating speed 15,000 rpm;
• mounted on a mandrel.

Packaging:

• 1pc

Hydroflex separator 0.06mm, diameter 19mm

Ultra-thin separator for final porcelain finishing.

Advantages:

• mounted and centered on the holder;
• thickness 0.06 mm;
• diameter 19mm;
• working range 3- 5000 rpm

Packaging:

• 1pc.

Hydroflex separator 0.07 mm diameter 19 mm

Ultra-thin separator for final porcelain finishing.

Advantages:

• mounted and centered on the holder;
• thickness 0.07 mm;
• diameter 19mm;
• working range 3- 5000 rpm

Packaging:

• 1pc.

DFS TORO-FLEX Diamond Separator ⌀ 22mm

TORO-FLEX separator for separating and contouring ceramics.

DFS catalog number 112242.

Characteristics:

• diameter: 22mm;
• thickness: 0.25 mm;
• embankment:coarse, coarse-grained embankment, intended for quick processing;
• operating range: 5' - 10000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Application:

• separation: cutting metal, ceramic or plastic elements;
• contouring: giving shape to prosthetic restorations;
• roughing: thanks to the coarse coating, the disc quickly removes material, but leaves a slightly rough surface (which later requires smoothing with a finer coating).

Packaging:

• 1 pc.

DFS TOTO-Flex Diamond Separator ⌀ 22mm

Diamond-coated separator for separation and contouring.

DFS catalog number 112231.

Characteristics:

• diameter: 22mm;
• thickness: 0.19 mm;
• coating: coarse, coarse-grained coating, on the entire surface of the disc, intended for quick machining;
• operating range: 5' - 10000 rpm;
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Application:

• ceramics;
• plastics / acrylics;
• gypsum.

Packaging:

• 1 pc.