Kondisil V-1 impression material

Kondisil V1 condensation type silicone impression material.

Characteristics:

• mint flavor;
• white color;
• high density.

Advantages:

• easy to process;
• flexible and dimensionally stable;
• high final hardness.

Application:

• for single-stage work in the office and laboratory.

Physical data:

• Shore hardness immediate: 70;
• Shore hardness after 2 hours: 79;
• max. compression strain: 1.3%;
• memory after deformation: 98.6%;
• linear dimensional change: 0.2%.

Packaging:

• 1.6kg can + 35ml catalyst

Kondisil V - 3 impression material

Kondisil V-3 condensation type silicone impression material.

Characteristics:

• blue color;
• low density.

Advantages:

• easy to process.

Application:

• for corrective work;
• edge registration layer after Kondisil V-1.

Packaging:

• Tube 200g + 35ml catalyst

Kondisil hardener 35 ml

Hardener for silicone impression materials type C.

Application:

• KKD Kondisil catalyst for silicone masses.

Packaging:

• 35ml tube

Zerosil Soft 2x500 ml tubes

Zerosil soft, a polyaddition vinylsiloxane impression material.

A cost-effective alternative to alginate materials for impressions for frame dentures and individual trays.

Indications:

• situational impressions;
• single-phase and single-stage two-layer impressions;

Technical data:

• orange color;
• final hardness: 40 Shore A;
• processing time: 2:00 min;
• oral period: 2:00 min;
• consistency: medium – type 2;
• compatible with all plasters.

Packaging:

• 2x500ml

Zetaplus impression material 900ml

Zetaplus impression material.

Characteristics:

• condensation type silicone impression material;
• for use with Indurent Gel 60ml catalyst;
• material intended for the first layer of a two-layer impression.

Advantages:

• reduces tension in the oral mucosa;
• high final hardness is a unique advantage in the two-layer, two-stage impression technique;
• In the two-layer, single-stage impression technique, the material adapts to the consistency of the lower-viscosity correction layer.

Packaging:

• 900ml (1530g)

Oxasil Mucosa 140 ml

Oxasil Mucosa 140ml is a polysiloxane impression material intended for use in dental offices and prosthetic laboratories.

Characteristics:

• Oxasil Mucosa mass in combination with Oxasil Activator Paste is used to take impressions of the so-called second layer in single-stage impressions and individual impressions in the case of complete edentulism;
• they reproduce the details of the impression being taken very accurately;
• Thanks to the silicone-based elastomeric materials used, they are characterized by good stretchability and resistance to all stresses and pressures.

Packaging:

• tube 140 ml

Zetaplus Intro Kit (Zetaplus + Oranwash + Indurent)

The kit consists of the following materials:

• Zetaplus material intended for the first layer of a two-layer impression. Mass with increased hardness and resistance to deformation. It is a C-silicone produced on the basis of special spheroidal fillers, which facilitate the flow of the mass to hard-to-reach places in the prosthetic field. High final hardness is a unique advantage in the technique of two-layer two-time impression. In the technique of two-layer one-shot impression, the material is adapted to the consistency of the correction layer with a lower viscosity.

• Oranwash L- (condensing) silicone with high fluidity. Due to the short time of working and taking an impression, it is recommended as a corrective mass in the technique of two-layer impressions. It is recommended to use Zetaplus as the base mass.

• Indurent Gel is a universal catalyst for the base mass and correction mass type C. Indurent can be used for almost all condensation silicones produced by the Zhermack company (except for the impression materials of the Zetaflow line).

Package:

• Zetaplus 900 ml.
• Oranwsh 140 ml.
• Indurent Gel 60 ml.

Elite HD+ Putty Normal 250ml+250ml

Elite HD + Putty - silicone impression material of the addition type intended for the first layer of two-layer impressions. The use of innovative nanotechnology enables very precise reproduction of details. The mass is characterized by fluidity, breaking strength, resistance to deformation and temperature. Thanks to its properties, accurate reproduction is possible even in a humid environment.

Characteristic:

• For hand mixing.
• High precision and dimensional stability.
• High hardness after setting.
• Orange color.

Packaging:

• 250ml of base + 250ml of catalyst

Elite HD + 2nd layer

Elite HD + II layer of a hydrocompatible silicone additive impression material of low (light) and medium (regular) viscosity intended for the second layer of two-layer, two-stage and one-stage impressions.

The selection of contrasting mass colors allows you to see the smallest details.

Elite HD + impression materials have excellent plasticity, high dimensional stability and resistance to tearing.

Characteristic:

• Mixing ratio 1:1.
• Hydrocompatible.
• Thixotropic.
• Colors blue (light), purple (regular).
• For dosing in an impression material gun.

Packaging:

• 2x 50ml.
• 12 mixing tips.

Elite HD+ II wars.light body fast green 2x50ml+12 mixing tips

technical data: ISO 4823 - ADA 19 type 3 Light Body working time: 1'30" time in the mouth: 2' 30" total setting time (23°C): 4' deformation under pressure: 3 - 5% material memory: >99.5% dimensional stability after 24 hours: <-0.20% hardness: 45 Shore'A mixing ratio: 1:1 warranty: 3 years

Elite HD+ II wars.light body normal blue 2x50ml+12 mixing tips

Technical data: ISO 4823 - ADA 19 type 3 Light Body Working time: 2'00” Time in the mouth: 3' 30'' Total setting time (23°C): 5' 30'' Deformation under pressure: 3 – 5% Material memory: >99.5% Dimensional stability after 24 hours: <-0.20% Hardness: 45 Shore A Mixing ratio: 1:1

Elite HD+ II wars.regular body normal purple 2x50ml+12 tips

technical data: ISO 4823 - ADA 19 type 3 Light Body working time: 2' time in the mouth: 3' 30'' total setting time (23°C): 5' 30'' material memory: >99.5% dimensional stability after 24 hours: <-0.20% hardness: 45 Shore'A mixing ratio: 1:1 warranty: 3 years

Indurent gel 60ml - activator for Zetaplus silicone, Oranwasch

Indurant gel. To be used only with silicone materials for use in the oral cavity.

Zetaplus silicone activator, Oranwasch.

Packaging:

• 60ml.

Oranwash L 140 ml

Oranwash L impression material.

Condensation silicone with a liquid consistency. Zetaplus is recommended as a base mass.

Characteristics:

• mixing time 30 sec;
• working time from start of mixing 1 min. 30 sec;
• setting time in the oral cavity: 3 min. 30 sec;
• total setting time at 23°C: 5 min;
• deformation during compression: 2% - 8%;
• material memory more than 99%;
• dimensional stability better than - 0.7%.

Advantages:

• short working and impression-taking time - ideal for the two-stage impression technique;
• fluidity ensures excellent penetration into dental pockets;
• Hydrocompatibility means that the presence of saliva and blood in the prosthetic field does not affect the quality of the impression.

Packaging:

• Tube 140 ml.

Outlet Detax greenbite color 2x50ml - expiry date: 2026.03

Greenbite colour bite registration material.

Based on A-silicone, with visual setting control. Medium consistency – medium-thick, thixotropic. For direct application to teeth.

Advantages:

• A color change from green to yellow indicates that the binding process has been completely completed.
• Short time in mouth (50 sec.).
• Maximum final hardness approx. 45 Shore D.
• Easy processing (cutting, grinding).
• Class I medical device.
• Color: Blue base, Yellow catalyst 1:1
• Apple flavored!

Packaging:

• 2 x 50 ml base + catalyst
• 8 green mixing tips
• 8 application tips

Outlet Detax Detaseal® antilock fast 50 ml - short expiry date 2025-12

Silicone for blocking gingival spheres.

Detaseal® antilock does not combine with polyether impression materials, condensation-curing silicones and alginates.

Please ensure that the material is of sufficient thickness.

Facilitates safe removal of the impression from the mouth, even in the case of significant areas of retention in the impression area.

For versatile use in areas with undercuts (wide open interdental spaces, span bridges or beam structures, loose teeth with reduced stability, etc.)

To prevent blockage in the gingival grooves, you can fill them with Detaseal® antilock material for easier removal of the one-stage impression.

Do not apply Detaseal® antilock to areas where impressions are being prepared.

Use only as blocking material.

Solutions used before impression taking (e.g. retraction solutions) may affect the setting reaction and must therefore be completely removed.

Advantages:

• short residence time in the mouth 1.25 min;
• very flexible when removing from the mold, tear-resistant;
• color: base - pink, catalyst - white.

Packaging:

• 1x 50ml
• 6x yellow mixing tips
• 6x oral tips

Detax greenbite apple 2x50ml

Greenbite apple bite registration material.

Based on A-silicone, medium consistency - medium thick, thixotropic. Applied directly to the teeth, it does not flow into the interdental spaces and is easily removed from the oral cavity.

Advantages:

• Short time in the mouth (60 sec.)
• Maximum final hardness, approx. 45 Shore D.
• Easy processing.
• Class I medical device.
• Color: Green base, Yellow catalyst 1:1.
• Green apple flavor!

Packaging:

• 2x50ml Base + catalyst
• 8 green mixing tips
• 8 application tips

Detax Detaseal® function 2x80ml

The first type A silicone for functional impressions on individual trays and on tray rims.

Advantages:

• Perfect, smooth and flexible.
• A specific plastic phase of 2, 30 minutes for plastic shaping and an extended hardening phase in the mouth of 4 minutes allow for comfortable performance of all functional movements.
• It provides precise detail and accuracy in measuring functional muscle movements without disturbing soft tissues.
• Class I medical device.
• Color: Red base, Yellow catalyst 1:1

Packaging:

• 2x80 ml base and catalyst
• A syringe for applying material to a spoon.

Detax glassbite 1x50ml

Glassbite material for bite registration.

Based on silicone A. Medium consistency, thixotropic. Direct application to teeth.

Advantages:

• Short time in the mouth (60 sec.).
• High final hardness, approx. 80 Shore A.
• It is also suitable as a matrix material when light-curing composites or when positioning auxiliary parts.
• Color transparent.
• Easy to process (cutting, grinding).
• Class I medical device.

Packaging:

• 1x 50ml
• 4 green mixing tips.
• 4 application tips.

GC Exaclear 2x48ml

Exaclear is an innovative, transparent silicone material, created to meet the requirements of high aesthetics, while facilitating the achievement of perfect results.

Characteristics:

• High transparency provides excellent visual control of the visibility of details and very effective light curing by silicone.
• Optimum consistency.
• Perfectly reproduces the details as the product becomes liquid during insertion to perfectly adapt to the preparation.
• Silicone is very easy to cut or drill using the injection molding technique.
• It has very good tear strength while being flexible enough to be removed from the mouth.

Application:

• Temporary work on crowns and bridges.
• Placement of brackets or fibers - easy transfer from the model to the oral cavity.
• Application of layered composite - easy light curing from the palatal side.

• Bite registration.

  Packaging:

• 2 x 48ml, 6 x mixing tips

Oxasil Light Flow 140ml

Oxasil Light Flow, C-silicone impression material, intended for use in dental offices and prosthetic laboratories.

Application:

• for second layer impressions;
• individual impressions;
• functional impressions;
• occlusion checking;
• impressions for temporary restorations and denture relining.

Advantages:

• short setting time;
• good plasticity during work;
• extended casting time of plaster models (up to 21 days);
• fresh peppermint flavor.

Packaging:

• 1pc/140ml

Detax Detaseal® hydroflow lite 2x50 ml

Precise silicone mass for Hydroflow impressions for the two-layer, one-stage technique and the two-layer, two-stage technique.

Advantages:

• Accurate reproduction of the smallest details, even in wet areas. "Perfect Flow".
• Thixotropic bond with exceptional flowability.
• Thermosensitive binding properties (SnapSet) ensuring short residence time in the oral cavity.
• Maximum elastic properties after stretching, high elasticity when demoulding, extremely tear-resistant.
• Class I medical device
• Color: Pink base, white catalyst 1:1.
• Recommended for two-layer, one-time techniques.

Regular set:

• Mixing time: 2 min.
• Working time in the mouth: 2 min.
• Total working time: 4 min.

Fast set:

• Mixing time: 1 min.
• Working time in the mouth: 1.30 min.
• Total working time: 2.30 min.

**Packaging:

• Base + catalyst 2 x 50 ml.
• Yellow mixing tips, 12 pieces.

Detax Detaseal® hydroflow putty Fast 2x250ml

Dentaseal hydroflow putty Fast impression material, first layer for preliminary impressions.

Advantages:

• Very good consistency, easy to knead.
• Soft initial consistency for excellent mixing results.
• It is ideal for preliminary impressions in the double impression technique and as a material for trays in the double-mix technique.
• Convenient and easy to dismantle thanks to: high elastic deformation with medium final hardness and maximum tensile strength.
• Time saving, short mixing time and time in the mouth (only 2 minutes!)
• Neutral taste.
• Class I medical device.

• Color: Apple green base, white catalyst 1:1

• Mixing time: 30 sec.

• Residence time in the mouth: 2 min.
• Total hardening time: 3.30 min.

Packaging:

• 2x250 ml base + catalyst

Stomaflex Light 130g

Stomaflex Light is a high-quality impression material. It is part of the Stomaflex system by SpofaDental, consisting of classic putty, low-density (light) mass and a liquid or gel catalyst. It provides perfect reproduction of the details of the prosthetic field, comfortable use and high resistance to moisture.

Application:

• second layer mass in simultaneous impressions (sandwich technique),
• stump injection mass / correction mass in two-time impressions,
• functional impressions on individual trays with complete toothlessness,
• checking the alignment of crowns and bridges.

Benefits:

• perfect quality of each impression,
• perfect reproduction of details, also in a humid environment,
• reduced sensitivity to latex gloves,
• contrasting color of the catalyst facilitating the obtaining of a homogeneous mixture,
• easy dosing and short mixing times with the use of gel catalyst

Package:

• tube 130 g

Stomaflex gel catalyst 60g

Stomaflex Gel Catalyst is a universal gel catalyst for silicone impression materials with a condensation bonding method.

Package:

• Tube 60g

Elite Glass 2x50ml + 6 mixing tips

Elite Glass is an addition silicone for making transparent forms intended for the polymerization of light-curing materials used for direct and indirect aesthetic reconstruction.

High transparency and adequate working time make Elite Glass particularly effective in various clinical situations: for creating molds directly in the patient's mouth (e.g. for discoloration) or indirectly, on the model (e.g. closing a diastema, correction of rotated teeth, enamel cracks , tooth structure irregularities, temporary crowns).

Characteristic:

• Dimensional stability during and after disinfection.

• High final hardness (70 Shore A).

• Unchanged shape and ability to be placed back in the mouth (together with the polymerized material).

• Easily processed with cutters after polymerization.

Advantages:

• High transparency of the material.

• Perfect polymerization of light-cured materials used for reconstruction.

• High-quality aesthetic reconstruction.

• Versatility of use.

Packaging

• 2x50 ml + 6 mixing tips

Zerosil Soft 2x875ml tubes

Zerosil soft, a polyaddition vinylsiloxane impression material.

A cost-effective alternative to alginate materials for impressions for frame dentures and individual trays.

Indications:

• Situational impressions;
• Single-phase and single-stage two-layer impressions;

Technical data:

• Orange color;
• Final hardness: 40 Shore A;
• Processing time: 2:00 min;
• Oral period: 2:00 min;
• Consistency: medium – type 2;
• Compatible with all plasters.

Packaging:

• 2x875ml

Regofix Transparent 2x50ml

Transparent bite registration material.

Application:

• Ideal for controlled bite registration in difficult conditions;
• To be used as a form for making temporary crowns;
• For the production of X-ray splints.

Physical data:

• Final hardness 70 Shore A;
• Consistency type 2 - medium density;
• Preparation time 40 sec;
• Setting time 120 s;
• Material memory >99.9%;
• Elastic deformation 2.5%;
• Dimensional stability <0.02%;
• Color - transparent.

Packaging:

• 2x 50ml

Dynax Light 2x50ml

Dynax light additive material for corrective impressions, can be combined with Dynax® clear, putty, heavy body and mono.

Tip:

• Dynax® materials are perfectly matched to each other! To obtain the best detailed impression, we recommend using Dynax® light only with the hydrophilic base material Dynax® putty and Dynax® heavy body.

Characteristics:

• Hardness 46 shore A;
• Processing time 90 sec;
• Setting time 90 s;
• Color emerald green.

Packaging:

• 2x50ml
• 6 x mixing tips

Dynax Heavy Body 2x50ml

A material based on addition silicones used to prepare precise preliminary impressions.

Characteristics:

• Non-sticky, optimal consistency;
• Hardness 70 shore A;
• Processing time 90 sec;
• Setting time 90 s;
• Colour blue.

Application:

• Suitable for sandwich, corrective and standard impressions, double-mix technique and functional marginal impressions:
• Can be combined with Dynax Light;
• Recommended for patients with residual teeth suffering from periodontitis;
• Thixotropic.

Packaging:

• 2x50ml
• 6x mixing tips

StoneBite 2x50ml silicone for bite registration

StoneBite is an elastomer-based addition silicone for bite registration with a high final hardness of 48 Shore D (very hard).

Very precise and stable in processing.

The orange color perfectly enhances contrast.

Application:

• Bite registration.

Physical properties:

• Final hardness 51 Shore D;
• Consistency according to ISO 4823 Type 2 - medium density;
• Preparation time 30 sec;
• Setting time 80 s;
• Material memory 99.9%;
• Elastic deformation < 2%;
• Dimensional stability < 0.1%;
• Orange color.

Packaging:

• 2x50ml
• 12 mixing tips
• 12 application tips

Oxasil Activator Paste 60ml

This activator is recommended for use with the Oxasil Soft Putty base mass as well as with the so-called second phase masses Oxasil Very Light Flov and Oxasil Mucosa.

Packaging:

• 60 ml tube

Dynax Clear 2x50ml

Dynax Clear transparent impression material, especially recommended for impressions for implants.

Characteristics:

• Hardness 60 Shore A;
• Processing time 90s;
• Binding time 120s;
• Medium consistency;
• Transparent colour.

Packaging:

• 2x50ml
• 6x mixing tips

Dynax Putty 2x450ml

Dynax Putty 1:1 addition silicone, first layer in the two-layer impression technique.

Characteristics:

• Non-sticky, easy-to-knead consistency;
• Optimal flexibility facilitating impression taking in areas with undercuts;
• Dynax Light is recommended as a second coat;
• Hardness 60 shore A;
• Processing time 90s;
• Setting time 90s;
• Sunny yellow.

Packaging:

• 2x450ml

Dynax Mono 2x50ml

Material based on addition silicones (vinylsiloxanes) for preparing precise single-phase impressions.

Characteristics:

• For the single-stage method;
• Can be combined with Dynax® light;
• Pleasant mint flavor;
• Thixotropic.

Properties:

• Final hardness 58 Shore A;
• Consistency according to ISO 4823 Type 2 - medium density;
• Intraoral period 1:30 min;
• Processing time 1:30 min;
• Setting time 3:00 min;
• Material memory 99.9%;
• Elastic deformation 6.7%;
• Dimensional stability < 0.1%.
• Violet.

Packaging:

• 2x50ml
• 6 mixing tips