Product Code:: 9167
Labormat SD wax evaporator
Dreve

3,396.01€ +vat

4,177.09€ incl tax

Labormat SD wax evaporator

Labormat SD Steamer. Capacity up to 12 cans. Suitable for polymerization of denture plastics. With built-in manual spray nozzle, sliding cover, thermostatic temperature control, individual spraying time setting, instant key for short steaming.

Technical data:

  • 63.5 x 66.0 x 94.0 cm;
  • 230 V / 50 Hz; 3100 Watts;
  • water capacity 50 l;
  • temperature range 0-95 ° C;
  • weight 75.0 kg,
  • stainless steel housing.

Package:

1 piece.

Product Code: 9167
Brands Dreve
Labormat SD wax evaporator

3,396.01€ +vat

4,177.09€ incl tax

Product Code:: 10417
WW2 wax evaporator
Intersonic

557.15€ +vat

685.30€ incl tax

WW2 wax evaporator

The WW-2 steamer is designed to rinse out wax from dental prostheses with hot water in a closed circuit. The wax is rinsed with a full or dispersed spray. The casing of the steamer and the bathtub are made of stainless steel. There is an electric heater installed inside the bathtub, a waste water drain and a pipe supplying water to the circulation pump. A filter is fitted on the water circulation pipe to prevent lumps of wax and plaster from entering the spray.

Technical data:

  • Total dimension (width x height x depth) - 365x430x360mm
  • The dimensions of the bathtub (W x H x D) - 360x310x240mm
  • Supply voltage - 230V / 50Hz
  • Power - 1.9 kW
  • Insulation class - I
  • Number of cans - 6 halves.
  • The minimum water volume is approx. 8 liters
  • Water temperature - 98oC
  • Maximum temperature signaling - red LED on
  • Weight - 10 kg

Package:

1 piece

Product Code: 10417
Brands Intersonic
WW2 wax evaporator

557.15€ +vat

685.30€ incl tax

Product Code:: 10454
Wax steamer WW3
Intersonic

736.09€ +vat

905.39€ incl tax

Wax steamer WW3

The WW3 wax steamer is made entirely of stainless steel

Technical data:

  • Total dimension 400x470x630mm
  • The dimensions of the bathtub are 330x370x370mm
  • Weight 15 kg
  • Supply voltage 200V / 50Hz
  • Power consumption 2.2KW
  • Number of cans 8 halves

Package:

1 piece

Product Code: 10454
Brands Intersonic
Wax steamer WW3

736.09€ +vat

905.39€ incl tax

Product Code:: 10461
WW1 wax evaporator
Intersonic

467.86€ +vat

575.46€ incl tax

WW1 wax evaporator

WAX EVAPORATOR WW-1

The WW-1 steamer is designed to rinse out wax from dental prostheses with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

  • ease and convenience of use
  • operational reliability
  • are made entirely of stainless steel
  • consist of generally available components
  • the large volume of the washing chamber enables simultaneous waxing of the wax from more cans of details

Technical data:

  • Total dimension 355x265x430mm
  • The dimensions of the bath are 260x240x310mm
  • Weight 8 kg
  • Supply voltage 200V / 50Hz
  • Power consumption 1.9KW
  • Insulation class I.
  • The minimum volume of water is approx. 6l
  • Number of cans / halves 4
  • Water temperature 98 C.
  • Maximum temperature signaling. Red LED is on

Package:

1 piece

Product Code: 10461
Brands Intersonic
WW1 wax evaporator

467.86€ +vat

575.46€ incl tax

Product Code:: 10531
Steamer with WW-2P polymerizer
Intersonic

805.04€ +vat

990.20€ incl tax

Steamer with WW-2P polymerizer

Steamer with polymerization function.

The WW2P steamer is characterized by:

  • ease and convenience of use
  • operational reliability
  • are made entirely of stainless steel
  • consist of generally available components
  • the large volume of the washing chamber enables simultaneous waxing of the wax from more cans of details

Technical data:

  • Total dimension 365x360x430mm
  • Bathtub dimensions 360x240x310mm
  • Weight 8 kg
  • Supply voltage 200V / 50Hz
  • Power consumption 1.9KW
  • Insulation class I.
  • Number of cans 6
  • Water temperature 98oC
  • Electronic control panel.

Package:

1 piece

Product Code: 10531
Brands Intersonic
Steamer with WW-2P polymerizer

805.04€ +vat

990.20€ incl tax

Product Code:: 10828
ISP-2 polymerizer
Intersonic

724.88€ +vat

891.61€ incl tax

ISP-2 polymerizer

ISP-2 polymerizer

Advantages:

  • 40 different polymerization programs can be set
  • ease and convenience of use, the ability to control the process by reading on the display
  • reliable, fully automatic operation
  • made of stainless steel
  • dimensions 360x240x310mm
  • number of frames 3

Package:

1 piece

Product Code: 10828
Brands Intersonic
ISP-2 polymerizer

724.88€ +vat

891.61€ incl tax

Product Code:: 11643
Steamer with WW3P polymerization function
Intersonic

993.81€ +vat

1,222.38€ incl tax

Steamer with WW3P polymerization function

Technical data:

  • Total dimension 400x470x630mm
  • The dimensions of the bathtub are 330x370x370mm
  • Weight 15 kg
  • Supply voltage 200V / 50Hz
  • Power consumption 2.2KW
  • Insulation class I.
  • Number of cans 8 halves
  • Water temperature 98C
  • Maximum temperature signaling. Red LED is on.

Package:

1 piece

Product Code: 11643
Brands Intersonic
Steamer with WW3P polymerization function

993.81€ +vat

1,222.38€ incl tax

Product Code:: 11706
ISP-3 polymerizer
Intersonic

896.41€ +vat

1,102.58€ incl tax

ISP-3 polymerizer

ISP-3 polymerizer

Advantages:

  • 40 different polymerization programs can be set
  • ease and convenience of use, the ability to control the process by reading on the display
  • reliable, fully automatic operation
  • made of stainless steel
  • dimensions 370x320x310mm
  • number of frames 4

Package:

1 piece

Product Code: 11706
Brands Intersonic
ISP-3 polymerizer

896.41€ +vat

1,102.58€ incl tax

Product Code:: 11733
Wax steamer WW-3 X
Intersonic

775.74€ +vat

954.16€ incl tax

Wax steamer WW-3 X

WAX BURNER WW-3X

The WW-3X steamer is designed to rinse out wax from dentures with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

  • the use of a thicker water line with a wider cross-section, resulting in a greater flow of rinsing water, thus a better final rinsing effect.
  • ease and convenience of use
  • operational reliability
  • are made entirely of stainless steel
  • consist of generally available components
  • the large volume of the washing chamber enables simultaneous waxing of the wax from more cans

Technical data:

  • Total dimension 400x470x630mm
  • The dimensions of the bathtub are 330x370x370mm
  • Weight 15 kg
  • Supply voltage 200V / 50Hz
  • Power consumption 2.2KW
  • Insulation class I.
  • Number of cans 8 halves
  • Water temperature 98C
  • Maximum temperature signaling. Red LED is on.

Package:

1 piece.

Product Code: 11733
Brands Intersonic
Wax steamer WW-3 X

775.74€ +vat

954.16€ incl tax

Product Code:: 12192
WW1P Steamer with polymeriser
Intersonic

724.88€ +vat

891.61€ incl tax

WW1P Steamer with polymeriser

Steamer with polymerization function

Advantages; - ease and convenience of operation - operational reliability - made entirely of stainless steel - large washing chamber volume

Technical data:

  • Total dimension - 265x440x360mm
  • The dimensions of the bathtub - 255x310x235mm
  • Supply voltage - 230V / 50Hz
  • Power - 1.5 kW
  • Insulation class - I
  • Number of cans - 4 halves
  • The minimum water volume is approx. 6 liters
  • Water temperature - 98 ° C.
  • Maximum temperature signaling - red LED on
  • Weight - 8 kg

Package:

1 piece

Product Code: 12192
Brands Intersonic
WW1P Steamer with polymeriser

724.88€ +vat

891.61€ incl tax

Product Code:: 12302
ISP polymerizer - 1
Intersonic

639.55€ +vat

786.65€ incl tax

ISP polymerizer - 1

ISP-1 polymerizer

Advantages:

  • 40 different polymerization programs can be set
  • ease and convenience of use, the ability to control the process by reading on the display
  • reliable, fully automatic operation
  • made of stainless steel
  • dimensions 260x240x310mm
  • number of frames 2

Package:

1 piece

Product Code: 12302
Brands Intersonic
ISP polymerizer - 1

639.55€ +vat

786.65€ incl tax

Product Code:: 12338
WW2P X evaporator with polymeriser
Intersonic

842.97€ +vat

1,036.85€ incl tax

WW2P X evaporator with polymeriser

Steamer with polymerization function. X version with thickened hose, stronger water jet.

The WW2P steamer is characterized by:

  • ease and convenience of use
  • operational reliability
  • are made entirely of stainless steel
  • consist of generally available components
  • the large volume of the washing chamber enables simultaneous waxing of the wax from more cans of details

Technical data:

  • Total dimension 365x360x430mm
  • Bathtub dimensions 360x240x310mm
  • Weight 8 kg
  • Supply voltage 200V / 50Hz
  • Power consumption 1.9KW
  • Insulation class I.
  • Number of cans 6 halves
  • Water temperature 98 ° C.
  • Electronic control panel.

Package:

1 piece

Product Code: 12338
Brands Intersonic
WW2P X evaporator with polymeriser

842.97€ +vat

1,036.85€ incl tax

Product Code:: 12364
Wax steamer WW-1X
Intersonic

506.81€ +vat

623.38€ incl tax

Wax steamer WW-1X

The WW-1X steamer is designed to rinse out wax from dentures with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

  • the use of a thicker water line with a wider cross-section, resulting in a greater flow of rinsing water, thus a better final rinsing effect.
  • ease and convenience of use
  • operational reliability
  • are made entirely of stainless steel
  • consist of generally available components
  • the large volume of the washing chamber enables simultaneous waxing of the wax from more cans.

Technical data:

  • Total dimension 355x265x430mm
  • The dimensions of the bath are 260x240x310mm
  • Weight 8 kg
  • Supply voltage 200V / 50Hz
  • Power consumption 1.9KW
  • Insulation class I.
  • The minimum volume of water is approx. 6l
  • Number of cans / halves 4
  • Water temperature 98 C.
  • Maximum temperature signaling. Red LED is on

Package:

1 piece.

Product Code: 12364
Brands Intersonic
Wax steamer WW-1X

506.81€ +vat

623.38€ incl tax

Product Code:: 12365
Wax steamer WW-2X
Intersonic

594.73€ +vat

731.52€ incl tax

Wax steamer WW-2X

The WW-2X steamer is designed to rinse out wax from dentures with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

  • the use of a thicker water line with a wider cross-section, resulting in a greater flow of rinsing water, thus a better final rinsing effect.
  • ease and convenience of use
  • operational reliability
  • are made entirely of stainless steel
  • consist of generally available components
  • the large volume of the washing chamber enables simultaneous waxing of the wax from more cans

Technical data:

  • Total dimension 365x360x430mm
  • Bathtub dimensions 360x240x310mm
  • Weight 8 kg
  • Supply voltage 200V / 50Hz
  • Power consumption 1.9KW
  • Insulation class I.
  • Number of cans / halves 6 Water temperature 98 degrees C.
  • Maximum temperature signaling. Red LED is on.

Bandage:

1 piece

Product Code: 12365
Brands Intersonic
Wax steamer WW-2X

594.73€ +vat

731.52€ incl tax

Product Code:: 12366
WW-4 steamer
Intersonic

1,049.49€ +vat

1,290.87€ incl tax

WW-4 steamer

WAX BURNER WW-4

The WW-4 steamer is designed to rinse out wax from dental prostheses with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

  • ease and convenience of use
  • operational reliability
  • are made entirely of stainless steel
  • consist of generally available components
  • the large volume of the washing chamber enables simultaneous waxing of the wax from more cans

Technical data:

  • Total dimension 430x360x310mm
  • Powering the so-called "FORCE"
  • Insulation class I.
  • Number of cans / halves 10
  • Water temperature 98 C.
  • Maximum temperature signaling. Red LED is on.

Package:

1 piece.

Product Code: 12366
Brands Intersonic
WW-4 steamer

1,049.49€ +vat

1,290.87€ incl tax

Product Code:: 12367
Wax steamer WW-5
Intersonic

1,313.58€ +vat

1,615.71€ incl tax

Wax steamer WW-5

WAX BURNER WW-5 InterSonic

The WW-5 steamer is designed to rinse out wax from dental prostheses with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

  • ease and convenience of use
  • operational reliability
  • are made entirely of stainless steel
  • consist of generally available components
  • the large volume of the washing chamber enables simultaneous waxing of the wax from more cans

Technical data:

  • Total dimension 480x360x310mm
  • Powering the so-called "FORCE"
  • Insulation class I.
  • Number of cans / halves 12
  • Water temperature 98 C.
  • Maximum temperature signaling. Red LED is on

Package:

1 piece

Product Code: 12367
Brands Intersonic
Wax steamer WW-5

1,313.58€ +vat

1,615.71€ incl tax

Product Code:: 12368
WW1 PX Steamer with polymeriser
Intersonic

763.67€ +vat

939.32€ incl tax

WW1 PX Steamer with polymeriser

Steamer with polymerization function. X version with thickened hose, stronger water jet.

Advantages; - ease and convenience of operation - operational reliability - made entirely of stainless steel - large washing chamber volume

Technical data:

  • Total dimension - 265x440x360mm
  • The dimensions of the bathtub - 255x310x235mm
  • Supply voltage - 230V / 50Hz
  • Power - 1.5 kW
  • Insulation class - I
  • Number of cans - 4 halves
  • The minimum water volume is approx. 6 liters
  • Water temperature - 98 ° C.
  • Maximum temperature signaling - red LED on
  • Weight - 8 kg

Package:

1 piece.

Product Code: 12368
Brands Intersonic
WW1 PX Steamer with polymeriser

763.67€ +vat

939.32€ incl tax

Product Code:: 13164
Polymerizer PM 45 PI Dental Promotion
Pi Dental

1,361.85€ +vat

1,675.08€ incl tax

Polymerizer PM 45 PI Dental Promotion

Pressure polymerization PM 45

Advantages:

  • electronic display
  • automatic polymerization cycle
  • temperature control 50-130 degrees C
  • pressure 0-6 bar
  • housing and boiler made of corrosion-resistant steel.

Technical data:

  • power supply 230 V ~, 50/60 Hz
  • power 1300 W
  • pressure max. 6 bar
  • time setting 1 - 60 min
  • temperature range 50 - 130 ° C
  • working space: Ø180 mm x 110 mm
  • maximum water volume 4.5 l
  • width 280 mm
  • depth 390 mm
  • height 280 mm
  • weight 10 kg.

Package:

1 piece

Product Code: 13164
Brands Pi Dental
Polymerizer PM 45 PI Dental Promotion

1,361.85€ +vat

1,675.08€ incl tax

Product Code:: 13166
Polymerizer PM 20 PI Dental Promotion
Pi Dental

1,151.54€ +vat

1,416.39€ incl tax

Polymerizer PM 20 PI Dental Promotion

Pressure polymerization PM 20

Advantages:

  • electronic display
  • automatic polymerization cycle
  • temperature control 50-130 degrees C
  • pressure 0-6 bar
  • housing and boiler made of corrosion-resistant steel.

Technical data:

  • power supply 230 V ~, 50/60 Hz
  • power 1300 W
  • pressure max. 6 bar
  • time setting 1 - 60 min
  • temperature range 50 - 130 ° C
  • working space Ø125 mm x 90 mm
  • maximum water volume 2 l
  • 215 mm wide
  • depth 355 mm
  • height 270 mm
  • weight 7 kg.

Package:

1 piece

Product Code: 13166
Brands Pi Dental
Polymerizer PM 20 PI Dental Promotion

1,151.54€ +vat

1,416.39€ incl tax

Showing 1 to 19 of 19 (1 Pages)