IPS Empress Investment Ring System 100g
IPS Empress Investment Ring System 100g is used to embed wax-shaped structures in the investment.
Package:
3 items / box
IPS Ceramic Etching Gel refill 5ml
IPS Ceramic Etching Gel is an etching agent designed to create an adhesive retention surface for ceramic materials deposited with composite materials. It increases the bond strength of the composite material (cement) with the ceramic surface.
ATTENTION ! The material cannot be used directly in the mouth.
Package:
5 ml gel
IPS Empress Investment Ring system 200g
The IPS Empress Investment Ring System 200g is used for embedding wax-shaped structures in the investment.
Package:
3 pcs / 1 pack
IPS Silicone-Ring small 100g
Silicone ring for IPS Empress 2, IPS Empress Esthetic and IPS e.max. Small size 100g.
Package:
1 piece.
IPS Empress Silicone Ring Large 200g
Silicone ring for IPS Empress 2, IPS Empress Esthetic and IPS e.max. Large size 200g.
Package:
1 piece.
IPS Investment Muffelsystem 200g 3pcs / pack
The IPSe.max Ring System 200g is used for embedding wax-shaped structures in the investment.
Features:
- The base has been widened so that the silicone rings fit it perfectly.
- Due to their larger sizes, it is easy to distinguish them from the stands used in the Empress system.
Package:
3 pcs
IPS e.max Alox Plunger
IPS e.max Alox Plunger. The pistons are used to force the molten material into the mold in a ring of investment.
Features:
- They are shorter and larger in diameter than the pistons from the Empress system.
- The pistons are rounded on both sides, so they can be used for stamping with both ends.
Package:
2 pcs.
IPS e.max Alox Plunger Separator
IPS e.max Alox Plunger Separator. This material prevents the molten material from sticking to the pistons during the pressing process in the furnace. The cold plunger is put into the opening of the container and turned. The powder remains on the surface of the plunger and forms an insulating layer. A very small amount of separator is sufficient. Then the cold plunger covered with a separator is inserted into the bore in the heated sealing compound ring.
Package:
200mg.
IPS e.max Ring System 100g - 3 pcs / pack
IPS e.max Inwestment Ring System 100g is used for embedding wax-shaped structures in the investment.
Features:
- The base has been widened so that the silicone rings fit it perfectly.
- Due to their larger sizes, it is easy to distinguish them from the stands used in the Empress system.
Package:
3 pcs.
IPS e.max Press Invex Liquid 1000ml
IPS e.max Press Inwex Liquid is used to dissolve the surface reaction layer formed on the pressed parts during the pressing process.
Package:
1000ml.
Ips Natural Die Material Kit
The light-curing material for the stumps stimulates the color of the prepared tooth. This color is the basis for the natural color reproduction of a given oral situation in the further development of all-ceramic restorations.
Package:
- 9 x IPS natural die material (ND1- ND9) 8g each
- 1 x 20 ml separator
- 8 x Handles / contact screws
- 8 x Capacitors / Pistons
- 2 x Universal handles
- 1 x Shade Guide IPS Natural Die Material
IPS Object Fix Flow
IPS Object Fix Flow. Heat-resistant paste aid for securing work on the firing trays. A paste with a liquid consistency.
Package:
- 1pcs / 10ml
IPS Sprue Guide 100g
IPS Sprue Guide It is used to check the correct fixing of the casting channels. For a ring of 100g
Package:
2 pcs
IPS Contrast Spray Labside 200 ml
The IPS Contrast Spray Chairside is intended for the preparation of the oral cavity before the optical recording of the situation. With the help of the IPS Contrast Spray Chairside, the different optical properties of the natural tooth (dentin and enamel) are smoothed out to obtain the best possible registration. The optimized geometry of the rotatable disposable cannula allows it to reach the preparation. IPS Contrast Spray is available in blue and has a lemon flavor.
Package:
1 piece
IPS Sprue Guide 200g
IPS Sprue Guide It is used to check the correct fixing of the casting channels. For a 200g ring
Package:
2 pcs
Gluceram 5ml
GLUCERAM contains a proprietary formula of extremely pure ceramic glue, resistant to temperatures up to 1350 C. It glues the trimmers with the work mounted on it, which enables safe transport of work to the furnace and its stabilization during sintering. Never again crowns and bridges falling off during the firing of porcelain will be a problem for technicians - ceramists. Effectively fixes bridges, half-bridges, crowns, veneers and inlays made of both all-ceramic and metal substructures.
Package:
5ml
Keystone Support Peg 10ml Promotion
A heat-resistant refractory material, used to stabilize works during the firing of ceramics.
Benefits:
- it is easy to form and can be used with any kind of porcelain.
- maintains a shape stable up to 1300 ° C
- does not affect the firing process.
- leaves no residue - simply remove with compressed air.
Packaged:
- syringe of 10 ml
IPS Multi Sprue Guide
IPS Sprue Guide Multi It is used to check the correct fixing of the casting channels. For a 200g ring
Package:
2 pcs
IPS Multi One-Way-Plunger 50 pcs
Pistons for the Multi system
Features:
- Necessary for the correct injection process.
- They help to regulate the flow.
Package:
50 pcs
IPS Multi Wax Pattern Form A 80 pcs.
IPS Multi Wax Pattern Form A Wax casting channels for the Multi system.
Package:
80 pcs
IPS Multi Mufefelsystem 200g - 3pcs
IPS Multi Muffelsystem 200g It is used to embed structures shaped in wax in the investment.
Package:
3 pcs