Carbide burrs are widely used in dental technology and prosthetics due to their exceptional strength, hardness and wear resistance.
Cemented carbide is a ceramic material that is produced from carbide powders and a metallic binder (usually cobalt or nickel) through a sintering process at high temperature and pressure. Cemented carbide is characterized by very high hardness, which allows for precise and effective work.
Thanks to their strength and hardness, carbide cutters allow for effective and precise performance of various dental procedures, which contributes to better and longer-lasting treatment results. Carbide burrs come in a variety of shapes and sizes, allowing them to be used in a variety of procedures, such as preparation for fillings, crowns and bridges.
Our offer includes carbide cutters for:
- gypsum processing,
- zirconia,
- precious and base metals,
- acrylic,
- composite,
- porcelain.
Blue strip cutter for plastics
Milling cutter for grinding plastics.
Advantages:
- for grinding thermoplastic materials;
- appropriate cuts provide a smooth surface;
- maximum speed 20,000 rpm.
Packaging:
- 1pc.
Carbide cutters
Carbide cutters
For processing materials:
- gypsum;
- Co - Cr;
- precious and base metals;
- acrylic;
- composite;
- porcelain.
Application:
- white stripe cutter for processing titanium and ceramics (the surface of the cutters is shaped with finely cut edges of the spiral system, allowing for economical grinding of the processed material);
- black stripe cutter for processing plaster, shellac, investment material (thick cuts allow for very efficient and quick grinding of all types of plaster);
- No. 10 cutter with black stripe for cutting thermoformable films;
- milling cutter with green stripe for rough grinding of chrome-cobalt alloys, nickel-chrome alloys and plastics (acrylic);
- cutter with red stripe for processing chrome-cobalt, nickel-chrome alloys and plastics (acrylic);
- yellow stripe cutter for grinding precious metal alloys, gold and porcelain.
Packaging:
- 1pc.
Edenta cutters fine with red stripe
Carbide cutters, fine with red stripe.
Application:
- for chrome-cobalt alloys;
- for chrome-nickel alloys;
- for acrylic.
Packaging:
- 1 pc.
DFS Diadur Micro 305002 cutter
MICRO Diadur carbide cutter.
Application:
- noble alloys;
- semi-precious alloys;
- Co-Cr alloys;
- non-precious feet;
- composite.
Characteristics:
- ⌀ 023mm;
- fine gradation.
Packaging:
- 1pc.
Milling cutter with purple stripe for grinding Cr-Co and Cr-Ni
Milling cutters for CHROME-COBALT and CHROME-NICKEL alloys.
Advantages:
- for rough grinding;
- the cutter surfaces are equipped with additional cutting edges;
- more efficient and faster grinding;
- increased durability;
- max speed 20,000 rpm
Packaging:
- 1pc.
DFS Diadur Macro Cutter 407801
Diadur Macro cutter with green stripe.
Characteristics:
- for Co-Cr metal, plaster and hard acrylics;
- working range 15-30000 rpm
- ⌀ 060mm.
Packaging:
- 1pc.
DFS Diadur Micro Cutter 303901
Diadur carbide cutter for acrylic and soft materials.
Characteristics:
- with red stripe, fine;
- ⌀ 060mm.
Packaging:
- 1pc.
DFS Diadur Macro Cutter 407501
Diadur Macro cutter with green stripe.
Characteristics:
- for Co-Cr metal, plaster and hard acrylics;
- working range 15-30000 rpm
- ⌀ 060mm.
Packaging:
- 1pc.
DFS Milling Cutter Diarur Quattro rose 605001
Diadur Quattro cutter with blue stripe.
Characteristics:
- for precious and semi-precious metals and Co-Cr metal;
- rose with a diameter of 040mm.
Packaging:
- 1pc.
Everall7 cutter for soft and flexible materials 1 piece
Carbide cutter for flexible materials and soft denture relines.
Characteristics:
- The 4shine cutters series is a series of cutters made of fine-grained, high-hardness cemented carbide, specifically tailored to the needs of dental technicians;
- shapes, sizes and types of incisions selected together with professionals from around the world;
- each cutter was made using the most modern Swiss CNC milling machines;
- Rigorous, ultra-precise testing guarantees high rotational accuracy and cutting efficiency.
Packaging:
- 1 pc.
DFS Diadur Micro 306102 cutter
Diadur Micro carbide cutter.
Characteristics:
- for alloys of base, precious and semi-precious metals;
- Co-Cr alloys;
- composite;
- ⌀ 023mm
Packaging:
- 1pc.
DFS Diadur Micro 302801 cutter
Diadur Micro carbide cutter.
Application:
- for alloys of base, precious and semi-precious metals;
- Co-Cr alloys;
- composite.
Characteristics:
- ⌀ 040mm;
- fine gradation.
Packaging:
- 1pc.
Edenta cutter, coarse with blue stripe
Carbide cutters.
Characteristics:
- for metal chrome-cobalt, chrome-nickel;
- for acrylic;
- cross standard blades, coarse;
- diameter 6.0 mm.
Packaging:
- 1pc.
DFS Diadur Strato 616801 Milling Cutter
Diadur Strato cutter with blue stripe.
Characteristics:
- for acrylic, soft lining and thermoplastic materials;
- ⌀ 040mm.
Packaging:
- 1pc.
DFS Diadur Macro Cutter 407901
Diadur Macro cutter with green stripe.
Characteristics:
- for Co-Cr metal, plaster and hard acrylics;
- working range 15-30000 rpm
- ⌀ 060mm.
Packaging:
- 1pc.
DFS Diadur Quattro 606801
Diadur Quattro cutter with blue stripe.
Characteristics:
- for precious and semi-precious metals and Co-Cr metal;
- ⌀ 040mm.
Packaging:
- 1pc.
DFS Diadur Quattro 606001
Diadur Quattro cutter with blue stripe.
Characteristics:
- for precious and semi-precious metals and Co-Cr metal;
- ⌀ 040mm.
Packaging:
- 1pc.
DFS Diadur Quattro 606602
Diadur Quattro cutter with blue stripe.
Characteristics:
- for precious and semi-precious metals and Co-Cr metal;
- ⌀ 023mm.
Packaging:
- 1pc.
DFS Diadur Micro 303301 cutter
MICRO Diadur carbide cutter.
Application:
- noble alloys;
- semi-precious alloys;
- Co-Cr alloys;
- non-precious feet;
- composite.
Characteristics:
- ⌀ 040mm;
- fine gradation.
Packaging:
- 1pc.
DFS Milling Cutter Diadur Nuevo 747301F
Diadur Nuevo cutter with red stripe.
Characteristics:
- for acrylic, soft thermoplastics, soft lining and non-precious alloys;
- operating range up to 30,000 rpm
- ⌀ 060mm.
Packaging:
- 1pc.
DFS Diadur Quattro rose 605602
Diadur Quattro cutter with blue stripe.
Characteristics:
- for precious and semi-precious metals and Co-Cr metal;
- rose with a diameter of 023mm.
Packaging:
- 1pc.
DFS Diadur Ergonom 100402
Diadur Ergonom cutter with red stripe.
Characteristics:
- to noble metals;
- ⌀ 023mm.
Packaging:
- 1pc.
AC cutter for acrylic 1 piece
Cross-cut cutters for processing acrylic materials.
Characteristics:
- The 4shine cutters series is a series of cutters made of fine-grained, high-hardness cemented carbide, specially adapted to the needs of dental technicians;
- each cutter was made using the most modern Swiss CNC milling machines;
- Rigorous, ultra-precise testing ensures high rotational accuracy and cutting efficiency.
Packaging:
- 1pc.
SC Cutter for plaster 1 piece
Milling cutters for processing dry plasters (milling cutter with green stripe) and wet plasters (milling cutter with black stripe) with thick and very thick cross-shaped cuts.
Characteristics:
- The 4shine cutters series is a series of cutters made of fine-grained carbide with high hardness, tailored specifically to the needs of dental technicians;
- shapes, sizes and types of incisions selected together with professionals from around the world;
- each cutter was made using the most modern Swiss CNC milling machines;
- Rigorous, ultra-precise testing ensures high rotational accuracy and cutting efficiency.
Packaging:
- 1pc.
TC Cutter for thermoplastics 1 piece
Milling cutters with cross-cuts for machining thermoplastic materials.
Characteristics:
- The 4shine cutters series is a series of cutters made of fine-grained carbide with high hardness, tailored specifically to the needs of dental technicians;
- shapes, sizes and types of incisions selected together with professionals from around the world;
- each cutter was made using the most modern Swiss CNC milling machines;
- Rigorous, ultra-precise testing ensures high rotational accuracy and cutting efficiency.
Packaging:
- 1pc.
Carbide bur inverted cone for handpiece 1 piece
Carbide drill for handpiece.
Form:
- inverted cone.
Packaging:
- 1pc.
Carbide drill straight slot for handpiece 1 piece
Carbide drill for handpiece.
Form:
- simple crevice tool.
Packaging:
- 1pc.
Carbide drill conical slot for handpiece 1 piece
Carbide drill for handpiece.
Form:
- conical slot drill.
Packaging:
- 1pc.
A cutter with a very fine cross cut for ceramics and precious metals.
Carbide cutters with very fine cross cuts (yellow stripe).
Made in the EU.
Application:
- for the final processing of ceramics, gold and precious metal alloys.
Packaging:
- 1 pc.
Fine cross-cut cutter for ceramics, chrome-nickel alloys
Carbide cutters with fine cross cuts (red stripe).
Made in the EU.
Application:
- for the final processing of precious metal alloys, chromium-nickel alloys, steel and acrylic;
- for rough processing of ceramics, shaping and contouring.
Packaging:
- 1 pc.
Standard cross-cut cutter for chrome-nickel, chrome-cobalt and other alloys
Carbide cutters with standard cross cuts (blue stripe).
Made in the EU.
Application:
- for the rapid development of chromium-nickel, chromium-cobalt and other types of alloys.
Packaging:
- 1 pc.
202 cutter with a black "lance" stripe for processing thermoformable foils
Carbide drill bit for quick and clean separation, cutting or finishing of all hard thermoforming materials, plaster and other materials.
Characteristics:
- working part length 11 mm;
- max speed 20,000 rpm
Packaging:
- 1 pc.
Coarse cross-cut cutter for acrylic, plaster and plastics
Carbide cutters with thick cross cuts (green stripe).
Made in the EU.
Application:
- for processing plaster, acrylic;
- for the rapid development of plastics.
Packaging:
- 1 pc.
Milling cutter with fine spiral cuts for precious metals, metal ceramics and titanium
Carbide cutters with fine spiral cuts (White stripe).
Made in the EU.
Application:
- for the development of precious metal alloys, metal ceramics and titanium.
Packaging:
- 1 pc.
Milling cutter with cross-sectional cuts for metal
Carbide cutters with cross-sectional cuts (purple stripe).
Made in the EU.
Application:
- for the development of chromium-cobalt and chromium-nickel alloys.
Packaging:
- 1 pc.
Milling cutter with straight cuts and an additional cross cut for silicone
Carbide cutters with straight cuts and an additional cross cut.
Made in the EU.
Application:
- for silicone development;
- for precise processing of edges and surfaces.
Packaging:
- 1 pc.
A cutter with thick straight cuts and an additional cross cut for soft materials.
Carbide cutters with thick straight cuts and an additional cross cut (black stripe).
Made in the EU.
Application:
- for the development of soft materials: acrylic, resin, silicone (soft denture relines).
Packaging:
- 1 pc.
Cutter with fine straight cuts for gold, metal and acrylic
Carbide cutters with fine straight cuts (red stripe).
Made in the EU.
Application:
- for final processing and gentle removal of gold, other metals and acrylic.
Packaging:
- 1 pc.
Standard straight cut cutter for metal
Carbide cutters with standard straight cuts (blue stripe).
Made in the EU.
Application:
- for the rapid development of chromium-cobalt, chromium-nickel, and other types of alloys.
Packaging:
- 1 pc.
Milling cutter with thick straight cuts for acrylic and plaster
Carbide cutters with thick straight cuts (green bar).
Made in the EU.
Application:
- for quick and effective processing of acrylic and plaster.
Packaging:
- 1 pc.
Milling cutter with extra thick straight cuts for acrylic and plaster
Carbide cutters with extra thick straight cuts (black stripe).
Made in the EU.
Application:
- for rough processing of plaster and acrylic.
Packaging:
- 1pc.
Carbide Cutter for Acrylic and Metal **Great Price**
Carbide cutters with standard cross cuts.
Made in the EU.
Application:
- for the preliminary processing of acrylic and plastics;
- for the rapid development of chromium-cobalt, chromium-nickel, and other types of alloys.
Packaging:
- 1 pc.
DFS Diadur MINI-TRI Milling Cutter for Zirconium
A cutter for cutting out work from a zirconium disc before sintering.
- No water cooling needed.
Characteristics:
- on the rectum;
- ⌀016mm;
- operation in the range of 5' - 10000 rpm.
Packaging:
- 1 pc.