Liquid for Vertex Orthoplast.

• For making cold braces.

Characteristics:

• Available in a wide range of colors (10 colors).

Packaging:

• 250ml.

Vertex Orthoplast - self-polymerizing acrylic material for the production of orthodontic appliances.

• Colourless. In addition, a wide range of liquid dyes (9) is available, with a capacity of 250 ml.
• Production of orthodontic appliances using the dough technique.
• Production of orthodontic appliances by the pouring technique.

Technical Specifications:

• Dough phase 9 minutes.
• Working time 6 minutes.
• Curing time 20 minutes at 55°C and 2.5 bar.
• Mixing ratio by volume / parts by weight 1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer).
• Flexural strength ≥ 50 MPa.
• Flexural modulus ≥ 1500 MPa.
• Water sorption ≤ 32 μg/mm³
• Solubility ≤ 5.0 μg/mm³

Packaging:

• 500g

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• 0.9mm wire.
• Length 10m.
• Resilient - hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1800 - 2000.

Packaging:

• 1 Roll/10m

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• 0.8mm wire.
• Length 20m.
• Resilient - hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1800 - 2000.

Packaging:

• 1 Roll/20m

Bite corrector - vestibular plate for children.

Characteristics:

• It provides conditions for the development of a correct bite in a child.
• It is used to wean the child from the habit of sucking the finger, pacifier and lips.
• Used in the therapy of children with speech disorders.

Attention:

• Choose the size of the plate according to the child's bite size.

Packaging:

• 1 piece.

Liquid for Orthocryl acrylic, for making braces.

• Colourless.
• Cold polymerizing.

Packaging:

• 500ml.

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• 0.6mm wire.
• Length 40m.
• Resilient - hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1800 - 2000.

Packaging:

• 1Roll/40m

Stainless steel mandible screw according to Muller.

Features:

• For moving the teeth across the dental arch in the anterior segment of the mandible.
• Travel path: 5mm.

Package:

1 piece.

Orthocryl Glitters. For coloring removable orthodontic appliances.

Characteristics:

• Glitter is added to the powder depending on the desired color intensity.
• Adding glitter does not change the way acrylic is used.
• The appliances are easy to trim and polish.
• colors; iris, red, blue, silver, gold, pearl.

Packaging:

• 50g.

Boxes for Maxi braces.

Characteristics:

• For the storage and protection of delicate orthodontic appliances.
• Hygienic.
• Nice shape.
• No sharp edges.
• Easy to clean.
• With additional ventilation holes.

Package:

1 piece.

Stainless steel sector screw downwards. Medium.

Characteristics:

• Guides with additional retention arches bent downwards.
• Travel distance 6mm.

Packaging:

• 1 piece.

Straight Mini Sector Stainless Steel Sector Bolt.

Characteristics:

• For moving individual teeth.
• The arrow indicates the direction of loosening the screw.
• Maximum expansion 4mm.

Packaging:

• 1 piece.

Orthocryl EQ powder. Long-life self-polymer.

Characteristics:

• For making acrylic plates in orthodontics.
• Used both in the technique of pouring (salt and pepper) and modeling (kneading dough).
• Transparent color.

Packaging:

• 1000g

Stainless steel screw for moving teeth across the dental arch - Medium.

Characteristics:

• With guide.
• For moving teeth across the dental arch and distalizing in the maxilla and mandible.
• Bright yellow plastic arrow.
• Screw shaft with transverse cuts that ensure optimal retention in the material.
• Limitation after reaching the maximum travel.
• Travel distance 7.5mm.

Packaging:

• 1 piece.

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• 0.7mm wire.
• Length 30m.
• Resilient - hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1800 - 2000.

Packaging:

• 1 Roll /30m

Screw Left C-14 3 trabecular.

Characteristics:

• Standard expansion screw.
• To the jaw.

Packaging:

• 1 piece.

Telescoping screw 6mm.

Characteristics:

• For moving individual teeth .
• They exert constant, elastic and gently dosed pressure on the tooth being moved.
• Thanks to their small dimensions, they can be easily placed on the board.
• The treatment starts with a 4mm screw, then it is changed to 6 and 8mm, depending on the distance by which the tooth needs to be moved.

Packaging:

• 1 piece.

Gast telescopic screw.

Characteristics:

• Mounting screw for telescopic screw.

Packaging:

• 1 piece.

Gast Telescopic Screw.

Characteristics:

• Nut with retention slots for telescopic screw.

Packaging:

• 1 piece.

Stainless steel screw for moving the teeth across the dental arch - Maxi.

Features:

• With a guide.
• For moving the teeth across the dental arch in the jaw.
• Bright yellow plastic arrow.
• Screw shaft with transverse cuts for optimal retention in the plastic.
• Limitation after reaching maximum travel.
• Travel 7.5mm.

Package:

1 piece.

decal

Characteristics:

• For orthodontic appliances.
• Nature or comics motifs to be placed in acrylic material.
• Thanks to this, each camera can have an individual character.

Packaging:

• 1 piece.

Stainless steel multi-sector screw, after Bertoni.

Characteristics:

• Transverse prosthetic screw for Y-cut plates.
• Reinforced guides.
• 4mm travel in each segment.

Packaging:

• 1 piece.

Stainless steel fan screw for moving the teeth across the dental arch.

Characteristics:

• For moving teeth across the dental arch in the anterior region of the maxilla.
• The elements of the plate open in a fan shape.
• Travel distance 7mm.

Packaging:

• 1 piece.

GASTA telescopic screw made of stainless steel 4mm.

Features:

• For moving single teeth.
• They exert a constant, springy and carefully dosed pressure on the moved tooth.
• Thanks to their small dimensions, they can be easily placed on the board.
• Treatment begins with a 4mm screw, then changes to 6 and 8mm, depending on the distance the tooth needs to be moved.

Package:

1 piece.

Stainless steel screw for moving the teeth across the dental arch - Mini.

Features:

• With a guide.
• For moving teeth across the dental arch and distalizing in the mandible or very narrow maxilla.
• White plastic arrow.
• Screw shaft with transverse notches for retention in the plastic.
• Limitation after reaching the maximum travel.
• Travel 6.5mm.

Package:

• 1 piece.

Premacryl liquid for making braces.

Fluid colors:

• Yellow.
• Green.
• Red.
• Blue.
• Colorless.

Packaging:

• 250g

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• Wire 1.5mmx0.75mm
• Length 10m.
• Hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1400 - 1600.

Packaging

• 1 Roll/10m

Multi-sector stainless steel screw by Bertoni.

Characteristics:

• With three independently operating sections.
• For Y-plates
• Reinforced guides.
• 4mm travel in each segment.

Packaging:

• 1 piece

Stainless steel screw for moving teeth along the Mini dental arch.

Characteristics:

• Straight.
• U-shaped guide
• Travel distance 2.5mm.

Packaging:

• 1 piece.

Vertex Orthoplast - self-polymerizing acrylic material for the production of orthodontic appliances.

• Colourless. In addition, a wide range of liquid dyes (9) is available, with a capacity of 250 ml.
• Production of orthodontic appliances using the dough technique.
• Production of orthodontic appliances by the pouring technique.

Technical Specifications:

• Dough phase 9 minutes.
• Working time 6 minutes.
• Curing time 20 minutes at 55°C and 2.5 bar.
• Mixing ratio by volume / parts by weight 1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer).
• Flexural strength ≥ 50 MPa.
• Flexural modulus ≥ 1500 MPa.
• Water sorption ≤ 32 μg/mm³
• Solubility ≤ 5.0 μg/mm³

Packaging:

• 1000g

Orthoprint monochromatic alginate mass is intended for impressions in orthodontics when preparing removable appliances.

• The alginate mass is characterized by very high flexibility and short setting time in the oral cavity, thanks to which working with it is maximally comfortable for the dentist and minimally invasive for the patient. The delicate flavor of vanilla soothes the gag reflex, in addition, the mass does not melt in the mouth. Orthoprint also has thixotropic properties.

• The mass does not contain heavy metals, absorbs water very quickly and is easy to mix. The consistency of the non-spraying powder makes it easy to work with the product.

Advantages:

• High flexibility.
• Short setting time in the mouth: 45 sec.
• Total setting time: approx. 1 min. 50 sec.
• Vanilla fragrance.
• Prevents vomiting.

Packaging:

• 500g.

Stainless steel screw for moving teeth along the dental arch Medium.

Characteristics:

• Straight.
• U-shaped guide
• Travel distance 4.5mm.

Packaging:

• 1 piece.

Buckles with 0.8mm ball anchor.

Characteristics:

• Hardness class spring-hard 1800 - 2000 MPa.

Packaging:

• 1 piece.

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• 1mm wire.
• Length 10m.
• Resilient - hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1800 - 2000.

Packaging:

• 1Roll/10m

Adams buckles. Mesial-distal length 7 mm

Characteristics:

• Wire 0.7mm /28.
• Hardness class spring-hard 1800-2000 MPa.
• Nickel-free. (nickel traces ≤ 0.05% result from the production process)

Packaging:

• 10 pcs.

Adams buckles. Mesial-distal length 8 mm.

Characteristics:

• Wire 0.7mm /28.
• Hardness class spring-hard 1800-2000 MPa.
• Nickel-free. (nickel traces ≤ 0.05% result from the production process)

Packaging:

• 10 pcs.

Buckles with 0.8mm ball anchor.

Characteristics:

• Hardness class elastic-hard 1800-2000 MPa.

Packaging:

• 1 piece.

Straight Magnum Stainless Steel Sector Bolt.

Characteristics:

• Bright yellow plastic arrow.
• Screw shaft with transverse cuts that ensure optimal retention in the material.
• Simple guides.
• Limitation after reaching the maximum travel.
• Travel distance 6mm.

Packaging:

• 1 piece.

Adams buckles. Mesial-distal length 10mm.

Characteristics:

• Wire 0.7mm/28.
• Hardness class spring-hard 1800-2000 MPa.
• Nickel-free (nickel traces ≤ 0.05% are due to the production process)

Packaging:

• 10 pcs.

Adams buckles. Mesial-distal length 11 mm.

Characteristics:

• Wire 0.7mm /28.
• Hardness class spring-hard 1800-2000 MPa.
• Nickel-free. (nickel traces ≤ 0.05% result from the production process)

Packaging:

• 10 pcs.

Stainless steel sector screw Mini - bent downwards.

Features:

• For moving single teeth.
• The arrow shows the direction in which to loosen the screw.
• Travel path 4mm.

Package:

1 piece.

Stainless steel screw to move the teeth across the Magnum dental arch.

Features:

• Very thick screw with a larger shank.
• With a guide.
• For moving the teeth across the dental arch in the maxilla and for two-jaw orthodontic appliances. - Bright yellow plastic arrow.
• Screw shaft with transverse notches for optimal retention in the plastic.
• Limitation after reaching the maximum travel.
• Travel 11mm.

Package:

• 1 piece.

Protective wax for fixed appliances.

• It was created especially for people who wear braces.
• Wax protects the oral mucosa from irritation and abrasions, which often occur at the beginning of orthodontic treatment.

Characteristics:

• Colorless.

Packaging:

• 1 pack/ 5 sticks

8mm stainless steel telescopic screw.

Features:

• For moving single teeth.
• They exert a constant, elastic and delicately dosed pressure on the moved tooth.
• Thanks to their small dimensions, they can be easily placed on the board.
• Treatment begins with a 4mm screw, then changes to 6 and 8mm, depending on the distance the tooth needs to be moved.

Package:

1 piece.

Adams buckles. Mesial-distal length 12 mm.

Characteristics:

• Wire 0.7mm /28.
• Hardness class spring-hard 1800-2000 MPa.
• Nickel-free. (nickel traces ≤ 0.05% result from the production process)

Packaging:

• 10 pcs.

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• 1.1mm wire.
• Length 10m.
• Resilient - hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1800 - 2000.

Packaging:

• 1 Roll/10m

Expansion screw type B .

Packaging:

• 1 piece.

Villacryl Ortho is a polymethacrylate material intended for making removable orthodontic appliances by pouring powder on the model.

Characteristics:

• Corresponds to international standards ISO 1567; Type II, Class I
• The product has the CE mark for compliance with the MDD 93/42/EEC directive.

Advantages:

• Easy to prepare and process.
• The monomer-impregnated polymer does not flow down the slopes of the palatal part.
• A simple and effective way of curing.
• It gives the possibility of obtaining any color of any intensity.
• It provides the patient with comfort of use.
• Braces made with Villacryl Ortho have high aesthetic values and color stability.
• Does not contain heavy metals.
• Biologically inert.

Technical data:

• Gel time 1 min.
• Polymerization process 20 min at 40-50°C and 2 bar pressure.
• Breaking strength 66.2 MPa [min. 60 MPa].
• Solubility 3.7 µg/mm3 [max. 6 µg/mm3].
• Sorption 10.4 µg/mm3 [max. 32 µg/mm3].

Packaging:

• 500g powder.
• 250 ml of liquid.
• 3 color concentrates of 15 ml.

Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.

Characteristics:

• Wire 1.75x0.9mm
• Length 10m.
• Hard.
• The highest quality of stainless steel.
• Tensile strength (N/mm2) 1400 - 1600.

Packaging:

• 1 roll/10m

Vertex Orthoplast - self-polymerizing acrylic material for the production of orthodontic appliances.

• Colourless. In addition, a wide range of liquid dyes (9) is available, with a capacity of 250 ml.
• Production of orthodontic appliances using the dough technique.
• Production of orthodontic appliances by the pouring technique.

Technical Specifications:

• Dough phase 9 minutes.
• Working time 6 minutes.
• Curing time 20 minutes at 55°C and 2.5 bar.
• Mixing ratio by volume / parts by weight 1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer).
• Flexural strength ≥ 50 MPa.
• Flexural modulus ≥ 1500 MPa.
• Water sorption ≤ 32 μg/mm³
• Solubility ≤ 5.0 μg/mm³

Packaging:

• 4000g