Spatula for impression material and plaster
Zhermack plastic spatula for alginate or plaster.
- Available in various colors.
Packaging:
- 1 piece.
Universal Tray Adhesive 10ml
A material that improves the adhesion of the silicone impression material to the tray.
Universal Tray Adhesive for use on all types of trays.
Packaging:
- 1pc/10ml.
Zhermack alginate bowl
Silicone bowl with a diameter of 12 cm and a capacity of 500 ml for mixing alginate masses and plaster.
Advantages:
- flexibility for easy mixing;
- intended for use with alginate or plaster masses;
- green color;
- easy to clean.
Packaging:
- 1pc.
Zhermack pink mixing tips 1 piece or 48 pieces
Mixing tips for impression materials.
Characteristics:
- pink color;
- length 6.8mm.
Packaging:
- 1pc or 48pcs
Fixing ring for inserts with impression material 380ml
Attachment for using 380 ml cartridges.
Packaging:
- 1pc
Zhermack grey (formerly yellow) mixing tips 1 piece or 48 pieces
Tips for silicone masses.
- The new feed system is open: the new mixing tips work on the current cartridges, and the current tips work on the new cartridges.
Packaging:
- 1pc. or 48pcs.
Kromopan Impression Material Measures, Set of 2
A pair of measuring spoons allowing you to measure the correct dose of water and powder to prepare the impression material.
Packaging:
- 2pcs/1set
Putty Cut - a cutter for impression material
Putty cut.
- A knife for cutting out interdental partitions and retention canals for the second layer of impression material in the base impression.
Packaging:
- 1 piece
Blocks for mixing and mixing impression materials
Blocks for making impression materials.
Dimensions:
- 9 x 16 cm
Packaging:
- 1 piece
Spatula for silicone masses
Metal spatula for mixing silicones.
- Comfortable wooden handle, easy to clean and disinfect.
Packaging:
- 1 piece.
Red Intraoral Tips (Oral Tips)
Oral Tips intraoral tips for light silicone masses, used for precise application of the mass.
It is applied to the mixing tip.
Packaging:
- 1pc or 100pcs
4:1 impression gun
Feeder for silicone impression materials and materials for temporary crowns in a 4:1 ratio
Packaging:
- 1 piece
Gun for 1:1, 2:1 impression materials
Feeder for silicone impression materials in 1:1, 2:1 proportions.
Packaging:
- 1 piece
Gun for pressing mass 1:1, 2:1 Dreve
Feeder for silicone impression materials in proportions 1:1 and 2:1
Packaging:
- 1 pc.
Dreve pink mixing tips 1pc or 40pcs
Pink mixing tips.
Fits the Dosper Evo silicone mixing device.
- Length 5.4mm.
Packaging:
- 1pc or 40pcs
Mixing tips orange Extra small Zhemack 1 piece or 48 pieces
Tips for silicone masses.
- The new delivery system is open: new mixing tips work on existing cartridges, and current mixing tips work on new cartridges.
Packaging:
- 1pcs or 48pcs
Plastic spatula for plaster and impression materials
Plastic spatula for plaster and impression materials.
- Different colors.
Packaging:
- 1 pc.
Hydrogum 5 Impression Material Measures, Set of 2
A pair of measuring spoons allowing you to measure the correct dose of water and powder to prepare the impression material.
Packaging:
- 2pcs/1set
Instructions for use: For each spoonful of powder (7 g), pour 1/3 of a measure of water (15 ml). For example, for 2 measures of powder (14 g) sufficient for one pressing spoon, pour 2/3 of a measure of water (30 ml).
Measures for Tropicalgin/Orthoprint impression material, set of 2
A pair of measuring spoons allowing you to measure the correct dose of water and powder to prepare the impression material.
Packaging:
- 2pcs/1set