IPS InLine build-Up liquid - modeling liquid 60ml
IPS InLine modeling liquid L or P.
L fluid:
- Intended for mixing IPS InLine powders used to make small restorations or prepare smaller batches. Modeling liquid L for people who prefer to work with dry matter - without having to constantly dry - because this liquid evaporates quickly. Thanks to this, IPS InLine, IPS InLine PoM Touch Up can be applied with one instrument.
P-fluid:
Intended for mixing IPS InLine powders used to make large restorations where a plastic and creamy mass consistency should be maintained longer. Modeling fluid P for people who prefer to work with wet mass with high stability at the same time.
Packaging:
60ml.
IPS InLine Incisal 20g
IPS InLine incisal, incisal mass.
Characteristics:
- It is available in 3 colors: I1, I2, I3.
Package:
- 20g.
868.65€ +vat1,103.69€
938.14€ incl tax
IPS InLine Starter Kit AD
The ceramic material IPS InLine is a leucite ceramic, partly made of natural raw materials. Natural feldspars are a mixture of potassium feldspar and sodium feldspar. From potassium feldspar, which is the main component in the ceramic material, leucite crystals are formed in the glass matrix. Leucite crystals are responsible for greater thermal expansion and greater mechanical resistance of the restoration. The emerging cracks are stopped on the leucite crystals or their direction changes. The crystalline phase absorbs the energy released during cracks, slowing down their formation.
Indications:
- Restorations on metal (veneering of the metal framework).
- Metal-free restorations (performing ceramic veneers on posts of refractory mass).
Packaging:
- 4 × 3g IPS InLine System Opaquer (A1, A2, A3, A3.5);
- 4 × 20g IPS InLine Deep Dentin (A1, A2, A3, A3.5);
- 4 × 20g IPS InLine Dentin (A1, A2, A3, A3.5);
- 2 x 20g IPS InLine Transpa Incisal (1, 2);
- 1 × 5g IPS InLine Mamelon (light);
- 1 x 5g IPS InLine Occlusal Dentin (orange);
- 1 × 5g IPS InLine Opal Effect (1);
- 4 × 20g IPS InLine One Dentcisal (1, 2, 3, 4);
- 1 x 20g IPS InLine Add-On;
- 2 × 3 g IPS Ivocolor Shade Dentin (SD1, SD2);
- 1 × 3g IPS Ivocolor Shade Incisal (SI1);
- 4 × 1.8g IPS Ivocolor Essence (white, sunset, maho, sapphire);
- 1 × 9g IPS Ivocolor Glaze Paste;
- 1 × 15 ml IPS Ivocolor Mix Liq Allround;
- 1 x 15ml IPS InLine System Opaq Liq Ref;
- 1 × 60 ml IPS InLine System BuildUp Liq P;
- 1 × Shade Guide IPS InLine Impulse/Incisal.
IPS InLine Opaquer AD 3g
IPS InLine / IPS InLine System Opaquer AD, opaque material.
Characteristics:
- Paste packets are very durable and have excellent masking properties, even when placed in a thin layer.
- Convenient and economical to use.
- They come in 16 A- D colors.
Package:
- Syringe 3g.
IPS InLine Dentin AD 20g
IPS InLine Dentin AD, a leucite-based ceramic with some natural raw materials. The new IPS InLine concept makes it extremely easy to apply dentin materials to achieve the desired shade.
Characteristics:
- Fast color reproduction.
- Optimum shrinkage properties.
- Simple application.
- Natural optical impression.
- It comes in 16 A- D colors.
Package:
20g.
IPS InLine Transpa Incisal 20g
IPS InLine Transpa Incisal, the incisal materials are graded in shade, similar to the natural incisal area.
Characteristics:
- It is available in 3 colors: TI1, TI2, TI3.
Package:
- 20g.
IPS InLine Transpa 20g
IPS InLine Transpa, transparent materials.
Characteristics:
- Available in 4 shades (Clear, Blue, Brown-gray, Neutral)
Package:
- 20g.
IPS In Line Dentin AD 100g
IPS InLine Dentin AD, a leucite-based ceramic with some natural raw materials. The new IPS InLine concept makes it extremely easy to apply dentin materials to achieve the desired shade.
Characteristics:
- Fast color reproduction.
- Optimum shrinkage properties.
- Simple application.
- Natural optical impression.
- It comes in 16 A- D colors.
Package:
- 100g.
IPS InLine Deep Dentin AD 20g
IPS InLine Deep Dentin A -D. With this material, the color effects are very similar to the natural ones, even in the case of a limited layer thickness. It is used especially in cases where there is not enough space in order to obtain a more intense color.
Characteristics:
- There is no color change compared to the color of the base dentin.
- Increased color quality and intensity.
- It comes in 16 A- D colors.
Package:
- 20g.
IPS InLine Transpa Incisal 100g
IPS InLine Transpa Incisal, the incisal materials are graded in shade, similar to the natural incisal area.
Characteristics:
- It is available in 3 colors: TI1, TI2, TI3.
Package:
- 100 g.
IPS InLine Margin AD 20g
Ips InLine Margin AD, Margin materials enable modeling of the ceramic cervical area.
Characteristics:
- High fracture toughness and edge strength.
- Good firing stability.
- It comes in 16 A- D colors.
Package:
- 20g
IPS InLine Incisal 100g
PS InLine incisal, incisal mass.
Characteristics:
- It is available in 3 colors: I1, I2, I3.
Package:
- 100g.
IPS InLine Opal Effect 20g
IPS InLine Opal Effect, opalescent masses with a stable iridescent effect.
Characteristics:
- available in 6 colors.
Package:
- 20g
IPS InLine modeling liquid 250ml
IPS InLine, modeling liquid L or P.
L fluid:
- Intended for mixing IPS InLine powders used to make small restorations or prepare smaller batches. Modeling liquid L for people who prefer to work with dry matter - without having to constantly dry - because this liquid evaporates quickly. Thanks to this, the IPS InLine and IPS InLine PoM Touch Up materials can be applied with one instrument.
P-fluid:
- Intended for mixing IPS InLine powders used to make large restorations where a plastic and creamy mass consistency should be maintained longer. Modeling liquid P for people who prefer to work with wet mass with high stability at the same time.
Packaging:
- 250ml.
IPS InLine Mamelon Masse 20g
IPS InLine Mamelon Masse.
It comes in the following colors:
- yellow- orange
- salmon
- light.
Package:
- 20g
IPS InLine Intensiv Gingiva IG
IPS InLine Intensiv Gingiva - tinting agents for Ips InLine Gingiva, allow to obtain the most individual color of the gingiva.
It comes in 4 colors.
Package:
- 20g
IPS InLine Occlusal Dentin 20g
IPS InLine Occlusal Dentin 20g.
It is available in Brown and Orange.
Package:
- 20g
IPS InLine Opaquer AD 9g
IPS InLine / IPS InLine Opaquer AD, opaque material.
Characteristics:
Paste packets are very durable and have excellent masking properties, even when placed in a thin layer.
Convenient and economical to use.
They come in 16 A- D colors.
Package:
- 9g.
Ips InLine Opaque F 1g
IPS InLine Opaquer F.
It strengthens and deepens the fluorescence.
Package:
- 1g
Ips InLine Intensive Opaquer 3g
IPS InLine System Intensive Opaquer AD, opaquer material.
Characteristics:
- Paste packets are very durable and have excellent masking properties, even when placed in a thin layer.
- Convenient and economical to use.
- They are available in 4 colors: White, Violet, Brown, Incisal.
Package:
- Syringe 3g.
Ips InLine One Dentcisal 20g
IPS InLine One New single-layer metal alloy veneering ceramic for fast and efficient work. Leucite ceramic material for veneering metal alloys with a CTE value of 13.8 - 14.5. IPS InLine One is compatible with the materials of the IPS InLine material set. IPS InLine One allows the fabrication of restorations in 16 Vita shades, 20 Chromascop shades and 4 Bleach shades using only 7 IPS InLine Dentcisal materials. In order to create an aesthetic restoration, it is enough to use one of the 7 materials, without the use of incisal materials or other additional materials. IPS InLine One saves 30% of the time spent on work. This material is very easy to apply and allows you to work very quickly and efficiently.
Selection of colors of ceramic masses:
- Dentcisal BL - shades BL1, BL2, BL3, BL4.
- Dentcisal 1 - Shades A- D A1, B1, Chromascop shades 110,120,130,140.
- Dentcisal 2 - Shades A- D A2, B2, C1, D2 Chromascop shades 210,220,230,240.
- Dentcisal 3 - Colors A- D A3, A3.5.
- Dentcisal 4 - Colors A- D B3, B4 colors Chromascop 310,320,330,340
- Dentcisal 5 - Shades A- D C2, D3, D4 Chromascop shades 410,420,430,440
- Dentcisal 6 - Colors A- D A4, C3, C4 colors Chromascop 510, 520,530,540.
Treatment:
- 20 g
Ips InLine Transpa 100g
IPS InLine Transpa, transparent materials.
Characteristics:
- Available in 2 shades (Clear, Neutral)
Package:
- 100g.
Ips InLine System Add-On 690 ° C 20g
IPS InLine Add-On 690 ° C. The low-melting material is used for the subsequent corrections and shape adjustments of already fired IPS InLine or IPS InLine PoM restorations.
Package:
- 20g.
226.72€ +vat288.07€
244.86€ incl tax
IPS InLine Intro Kit AD A3
The ceramic material IPS InLine is a leucite ceramic, the production of which partly uses natural raw materials. Natural feldspars are a mixture of potassium feldspar and sodium feldspar. From the potassium feldspar, which is the main component in the ceramic material, leucite crystals are formed in the glass matrix. Leucite crystals are responsible for the greater thermal expansion and greater mechanical resistance of the restoration. The cracks that occur on the leucite crystals are stopped or their direction is changed. The crystalline phase absorbs the energy released during the cracks, slowing their formation.
Indications:
- Metal restorations (veneering of metal frameworks).
- Metal-free restorations (making ceramic veneers on the posts of refractory mass).
Package:
- 1 × 3 g IPS InLine System Opaquer (A3)
- 1 × 20 g IPS InLine Deep Dentin (A3)
- 1 × 20 g IPS InLine Dentin (A3)
- 1 × 20 g IPS InLine Transpa Incisal (2)
- 1 × 20 g IPS InLine One Dentcisal (3)
- 1 × 5 g IPS InLine Transpa (clear)
- 1 × 5 g IPS InLine Mamelonmasse (light)
- 1 × 5 g IPS InLine Occlusaldentin (orange)
- 1 × 5 g IPS InLine Opal Effect (1)
- 1 × 3 g IPS Ivocolor Shade Dentin (SD2)
- 2 × 1.8 g IPS Ivocolor Essence (white, sunset)
- 1 × 3 g IPS Ivocolor Glaze Paste
- 1 × 15 ml IPS Ivocolor Mix Liq allround
- 1 × 60 ml IPS InLine System BuildUp Liq P
- 1 × 15 ml IPS InLine System Opaq Liq Ref.