Dreve FotoDent resin biobased model 385nm beige opaq 1kg

BioDent® 385 nm model

The BioDent® model is a light-cured resin consisting of 50% renewable raw materials. The material properties are ideal for the production of models (also the above-mentioned Aligner). The FotoDent® biological-based model can be cleaned using the FotoClean program.

Advantages:

• Less pollution in the atmosphere.
• Free from carcinogenic materials.
• Shorter cleaning times.

Material data:

• Opaque beige color.
• Elastic modulus ≥ 2200 MPa.
• Viscosity ~ 0.6 Pa·s.
• Bending strength ≥ 95 MPa.

Packaging:

• 1 kg bottle.

Dreve FotoDent denture resin 385 nm pink transparent 1kg

Light-curing resin for the production of denture bases.

The material provides accurate results with exceptional dimensional stability.

The FotoDent® denture is MMA-free and color-stable.

Material data:

• Final hardness 80 Shore D.
• Elastic modulus > 2000 MPa.
• Bending strength > 80 MPa.
• Viscosity 0.4-0.6 Pa·s.
• Transparent pink color.

Packaging:

• 1 kg

Dreve FotoDent splint resin 405nm clear transparent 1kg

Light-curing resin based on methacrylic resin, for 3D printing 405 nm.

For making dental splints, transparent.

High resistance to breakage and minimal wear guarantee constant mechanical properties and extended service life of the rail.

Biocompatible. Class IIa medical device.

Advantages:

• Very durable and resistant.
• The uniform surface reduces the susceptibility to deposits and discoloration.
• Almost invisible in the mouth.

Physical data:

• Viscosity approx. 0.6 Pa s.
• Density approx. 1.1 g/cm³.
• Bending strength >75 MPa.
• Elongation at break >10%.
• Young's modulus >1500 MPa.

Packaging:

• 1 kg

Dreve FotoDent cast resin 385nm/405nm red transparent 1kg

Light-curing resin for printing skeletons. Burns without residue. Transparent red color. The material is highly compatible: it can be used with all embedding materials available on the market.

Material data:

• Bending strength ≥ 100 MPa
• Elongation at break 7.5%-11%
• Elastic modulus ≥ 2000 MPa
• Final hardness 80-90 Shore D
• Color red transparent
• Viscosity < 0.3 Pa·s

Packaging:

• 1 kg.

Dreve FotoDent gingiva resin 385nm red opaque 1kg

Light-cured resin for printing a gingival mask.

Durable soft and flexible.

Perfectly combines with models made of resin models.

Material data:

• Final hardness approx. 70 Edge A
• Pink color
• Deformation recovery 100%
• Viscosity approx. 2 Pa·s
• Bending deformation > 40%

Packaging:

• 1 kg.

Dreve FotoDent guide resin 405 nm blue transparent 1kg

Light-curing resin for the production of implant templates.

Dimensionally stable and biocompatible.

Material data:

• Color: transparent blue
• Modulus of elasticity > 1,700 MPa
• Bending strength ≥ 75 MPa
• Elongation at break > 10-15%
• Final hardness > 80-85 Shore D

Packaging:

• 1 kg

Dreve FotoDent guide resin 385 nm blue transparent 1 kg

Light-curing resin for the production of implant templates.

Dimensionally stable and biocompatible.

Color: transparent blue.

Material data:

• Color: transparent blue
• Modulus of elasticity > 1,700 MPa
• Bending strength ≥ 75 MPa
• Elongation at break > 10-15%
• Final hardness > 80-85 Shore D

Packaging:

• 1 kg

Dreve resin FotoDent model2 385nm beige 1kg

Developed specifically for the new generation of 385nm printers.

Light-curing resin for the production of dental models for orthodontics and prosthetics.

Faster printing process due to higher efficiency and precision.

Also suitable for printing expert and show models.

Material data:

• Final hardness sdf
• Elastic modulus ≥ 1900 MPa
• Bending strength ≥ 85 MPa
• Beige colour
• Viscosity 0.8-1.2 Pa·s
• Elongation at break ≥ 8%

Packaging:

• 1 kg

Dreve resin FotoDent tray 2 385nm/405nm green 1kg

Optimized, biocompatible resin for the production of dental impression trays.

High reactivity with low viscosity.

Simplified cleaning and improved mechanical properties.

Printing time twice as short, possible layer thickness of 300 μm.

Ready-made impression trays have a homogeneous surface, which significantly reduces manual modifications.

Printing time and material consumption

• Printing speed (mm/h): 51
• Printing time/platform (min): 82
• Printing time/bucket (min): 5.1
• Buckets/vert platform: 16
• Material consumption (g/spoon): 15
• Absolute height (mm): 70
• Cost/spoons approximately (€): 2.49

Material data:

• Bending strength > 75 MPa
• Elongation at break > 5%
• Modulus of elasticity ≥ 2,000 MPa
• Final hardness > 80 Shore D
• Green color
• Viscosity approx. 1 Pa·s

Packaging:

• 1 kg

Dreve resin FotoDent setup 385nm/405nm maize yellow 1kg

Light-curing resin for the production of orthodontic appliances. Configuration models are perfect for thermoforming techniques.

Material data:

• Final hardness approx. 80-85 Edge D
• The color of corn is yellow
• Modulus of elasticity ≥ 2,000 MPa
• Viscosity 1.2 Pa·s
• Bending strain ≥ 11-15%
• Bending strength ≥ 95 MPa

Packaging:

• 1 kg