Bego grinding discs 34x3mm 1 piece
Discs for grinding the remains of casting channels after they have been cut off.
Catalog number BEGO 43080
Characteristics:
- disc diameter 34x3mm;
- recommended rotational speed 10,000 rpm.
Packaging:
- 1 pc.
Keystone100mm reinforced disc for polisher
Reinforced disc for polishing.
- Diameter 100mm.
Packaging:
- 1pc.
CR-CO separators 37x1.0mm
Carborundum separators for straightening casting channels.
Characteristics:
- diameter 37mm x 1mm.
Packaging:
- 1pc.
Porcelain separators 22x0.3 mm
Carbon separators for porcelain processing.
Characteristics:
- diameter 22x03 mm.
Packaging:
- 1pc.
EWA 98C cutter disc
Shield to Eve.
Carborundum disc for cutting and grinding plaster models.
Characteristics:
- diameter and thickness of the disc fill 250x6x20-98C24 NBF or 250x7x20-98C20 MBF;
- hole diameter 20mm;
- max. speed 3,850 rpm
Packaging:
- 1pc.
Metal discs 25x0.6 mm
Carborundum cutting discs for Cr-Co.
Characteristics:
- size 25x06mm.
Packaging:
- 1pc.
Bego grinding discs 22x3mm 1 piece
Grinding discs.
Catalog number BEGO 43100
Characteristics:
- very durable;
- for grinding after cutting off casting channels;
- disc diameter 22x3mm.
Packaging:
- 1 pc.
Renfert reinforced disc 40x1.0mm 1 piece or 25 pieces
Renfert reinforced disc, reinforced with glass fibre.
- Particularly high cutting performance with extreme break resistance.
Renfert catalog number: 581040
Characteristics:
- high quality and resistant shields;
- high cutting performance with maximum protection against breakage;
- for cutting and separating metal alloys;
- operation in the range up to 25,000 rpm;
- diameter 40x1.0mm.
Packaging:
- 1pc. or 25pcs.
DFS Sidia Micro Diamond Disc ⌀ 8mm
Diamond disc (full diamond) for contouring CoCr alloys.
DFS catalog number 50144.
Characteristics:
- diameter: 8mm;
- thickness: 0.40mm;
- fill: fine, red stripe;
- revolutions: from 5' to 15000 rpm
- assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.
Packaging:
- 1 pc.
BUTTERFLY large reinforced shield 125/1.0 BF
Reinforced disc for polishing-grinding machine.
Characteristics:
- reinforced on both sides with fiberglass mesh;
- for cutting casting channels;
- diameter 125x1.0mm.
Packaging:
- 1pc.
BUTTERFLY reinforced shield, diameter 40mm
Shields reinforced with a handle.
Advantages:
- reinforced on both sides with high-performance and durable fiberglass mesh;
- for cutting steel and precious alloys;
- does not cause heating of the processed material;
- maximum speed 38,000 rpm.
Characteristics:
- white color, thickness 40x0.4mm;
- yellow color thickness 40x05 mm;
- green color thickness 40x0.7 mm;
- blue color thickness 40x1.0 mm;
- red color, thickness 40x1.0 mm with reinforcement.
Packaging:
- 1 pc.
Klettfix cutting disc MT3/MT3pro/MT Plus
The Klettfix system is a cost-effective solution for wet trimming and provides high cutting performance.
Renfert catalog number 18031100- grit 80, 18031200- grit 120
Advantages:
- MT Plus/ MT 3/ MT3 pro cutting disc;
- grit 80 (coarse) or 120 (fine);
- diameter 23.4 cm.
Packaging:
- 1 pc.
Corundum discs 38x1.0mm
Corundum discs for cutting casting channels.
Characteristics:
- diameter 38 mm;
- thickness 1.0mm.
Packaging:
- 1pc.
Coarse grinding wheel 80x10mm
Ceramic grinding disc 80/10 mm for mounting on a stationary grinder.
Application:
- for rough grinding of precious metal alloys, chrome, cobalt, stainless steel and other non-precious alloys;
- max speed 2800 rpm
Packaging:
- 1 pc.
Separator with diamond embankment 20/03 BF
Ultra-thin reinforced separator with diamond coating.
Advantages:
- very flexible, high performance and durability;
- double reinforcement with very thin fiberglass mesh.
Application:
- for cutting and processing porcelain and zirconium;
Maximum speed:
- 50,000 rpm;
- diameter 20/0.3mm.
Packaging:
- 1 pc.
Butterfly ultra-thin grinding wheel 22/0.2 + BF
Ultra-thin grinding wheel for steel and alloys.
Characteristics:
- very flexible, reinforced on both sides with fiberglass mesh, high performance and durability;
- for cutting steel, precious alloys and plastics;
- does not cause heating of the processed material or excessive load on power tools;
- max. speed: 50,000 rpm;
- diameter 22x02mm.
Packaging:
- 1 pc.
ECO-Disk reinforced discs 38x1.0mm
Reinforced discs 38x1.0mm.
Color may vary from that shown in the photo.
Packaging:
- 1 pc.
DFS SIDIA Macro Diamond Separator ⌀ 22mm
Diamond disc (full diamond) for contouring CoCr alloys.
DFS catalog number 58154.
Characteristics:
- material: full diamond;
- diameter: 22 mm;
- thickness: 0.35mm;
- grit: medium, grit on the entire surface of the disc (marked with a blue ring);
- revolutions: from 5' to 15000 rpm
- assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.
Packaging:
- 1 pc.
Butterfly reinforced grinding wheel with diamond coating 20/0.2 BF
Ultra-thin reinforced separator with diamond coating.
Characteristics:
- very flexible, high performance and durability;
- double reinforcement with very thin fiberglass mesh;
- maximum speed 50,000 rpm;
- diameter 20/0.2mm.
Application:
- for cutting and processing porcelain and zirconium.
Packaging:
- 1 pc.
Butterfly grinding wheel reinforced ultra thin 26/02+ BF
Ultra-thin grinding wheel for steel and alloys.
Characteristics:
- very flexible, reinforced on both sides with fiberglass mesh, high performance and durability;
- for cutting steel, precious alloys and plastics;
- does not cause heating of the processed material or excessive load on power tools;
- max. speed: 50,000 rpm;
- diameter 26x02mm
Packaging:
- 1 pc.
Butterfly grinding wheel reinforced ultra thin 22/0.3
Ultra-thin grinding wheel for steel and alloys.
Characteristics:
- very flexible, reinforced on both sides with fiberglass mesh, high performance and durability;
- for cutting steel, precious alloys and plastics;
- does not cause heating of the processed material or excessive load on power tools;
- max. speed: 50,000 rpm;
- diameter 22x0.3mm.
Packaging:
- 1 pc.
Butterfly ultra-thin grinding wheel 22/0.2 BF
Ultra-thin grinding wheel for steel and alloys.
Characteristics:
- very flexible, reinforced on both sides with fiberglass mesh, high performance and durability;
- for cutting steel, precious alloys and plastics;
- does not cause heating of the processed material or excessive load on power tools;
- max. speed: 50,000 rpm;
- diameter 22x0.2mm.
Packaging:
- 1 pc.
DFS Shield Sidia Micro 16mm
Diamond disc (full diamond) for contouring CoCr alloys.
Characteristics:
- operating range 5-15000 rpm;
- diameter 16 mm;
- thickness 0.25mm;
- mounted and centered.
Packaging:
- 1pc.
Carborundum disc for OMEC cutter
Carborundum disc for OMEC cutter.
- The shield can be used on both sides.
Packaging:
- 1pc.
Dynex discs 40x0.5mm 1 piece
Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and dental alloys.
Renfert catalog number 570540
Application:
- ideal for cutting sprues and grinding large surfaces of restorations made of base metals and modeling alloys;
- for cutting casting rings with pressed ceramics;
- maximum speed 38000 rpm.
Advantages:
- effective separation and precise processing;
- safe processing thanks to the highest cutting efficiency;
- gentle on the material thanks to extremely low thermal conductivity.
Packaging:
- 1 pc.
Butterfly ultra-thin grinding wheel 20/0.15BF
Ultra-thin diamond separators for cutting zirconium and porcelain.
Characteristics:
- for making very thin incisions and interdental separations;
- reinforced in the middle with fiberglass mesh;
- they do not cause heating of the processed material;
- outer diameter in mm: 20 (± 0.5);
- thickness in mm: 0.15 (± 0.02);
- maximum speed RPM 1/min: 25,000.
Packaging:
- 1pc
Dynex discs 26x0.3mm 1 piece
Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and model alloys.
Renfert catalog number 570326
Application:
- suitable for cutting and grinding thick canals (< 5 mm) and small areas of restorations made of precious and non-precious metal alloys;
- maximum speed 38000 rpm.
Advantages:
- effective separation and precise processing;
- safe processing thanks to the highest cutting efficiency;
- gentle on the material thanks to extremely low thermal conductivity.
Packaging:
- 1 pc.
Grinding discs 35x3mm 1 piece
Grinding discs.
Renfert catalog number 6152000
Characteristics:
- high quality and resistant shields;
- for cutting and separating chrome-cobalt castings;
- operation in the range up to 25,000 rpm;
- diameter 35mm;
- thickness 3mm.
Packaging:
1pc.
DFS Shield Sidia Micro 22mm
Diamond disc (full diamond) for contouring CoCr alloys.
Characteristics:
- operating range 5-15000 rpm;
- diameter 22 mm;
- thickness 0.30mm;
- mounted and centered.
Packaging:
- 1pc.
Dynex discs 40x0.4mm 1 piece
Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and model alloys.
Renfert catalog number 570440
Application:
- ideal for cutting sprues and grinding large surfaces of restorations made of base metals and dental alloys;
- maximum speed 38000 rpm.
Advantages:
- effective separation and precise processing;
- safe processing thanks to the highest cutting efficiency;
- gentle on the material thanks to extremely low thermal conductivity.
Packaging:
- 1 pc.
Dynex discs 40x0.7mm 1 piece
Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and model alloys.
Renfert catalog number 570740
Application:
- ideal for cutting sprues and grinding large surfaces of restorations made of base metals and dental alloys;
- for cutting casting rings with pressed ceramics;
- maximum speed 38000 rpm.
Advantages:
- effective separation and precise processing;
- safe processing thanks to the highest cutting efficiency;
- gentle on the material thanks to extremely low thermal conductivity.
Packaging:
- 1 pc.
Dynex discs 40x1.0mm 1 piece
Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and model alloys.
Renfert catalog number 571040
Application:
- ideal for cutting sprues and grinding large surfaces of restorations made of base metals and dental alloys;
- for cutting casting rings with pressed ceramics;
- maximum speed 38000 rpm.
Advantages:
- effective separation and precise processing;
- safe processing thanks to the highest cutting efficiency;
- gentle on the material thanks to extremely low thermal conductivity.
Packaging:
- 1 pc.
DFS Shield Sidia Micro 19mm
Diamond disc (full diamond) for contouring CoCr alloys.
Characteristics:
- operating range 5000-15000 rpm;
- diameter 19 mm;
- thickness 0.30mm;
- mounted and centered.
Packaging:
- 1pc.