Gnathostar Lateral teeth
Gnathostar teeth are designed in accordance with the latest knowledge about the morphology of natural teeth. Thanks to their shape, color and special layer structure, they are used in all types of removable dentures.
Characteristics:
- Gnathostar tines comply with DIN 13914 and ISO 3336 standards.
- They are registered and admitted to trading in Poland (certificate number 10184/M/94).
- They are produced in five sizes for the upper jaw and five for the lower jaw.
- The color of the teeth is in accordance with the Chromascop color key containing 20 colors divided into five color groups, and in 16 A-D colors and 4 bleached teeth colors.
- In each group, individual shades are marked with increasing numbers as the intensity of the color increases.
- Thanks to the compatibility of tooth colors with other materials produced by Ivoclar, they can be used in all types of dentures.
- Gnathostar teeth have a layered structure that closely mimics the structure of natural teeth.
Application:
- Complete dentures.
- Partial dentures.
- skeletal prostheses.
Packaging:
- flap 8 pcs.
Ivostar Front teeth
Ivostar teeth are designed according to the latest knowledge in the morphology of natural teeth. Thanks to their shape, color and special layered structure, they can be used in all types of removable dentures. Ivostar teeth comply with DIN 13914 and ISO 3336 standards. They are registered and admitted to trading in Poland (certificate number 10184 / M / 94).
Characteristics:
- The Ivostar upper anterior teeth come in three triangular, square and oval shapes.
- There are five different tooth sizes in each of these groups.
- Ivostar lower front teeth come in six sizes.
- The color of the teeth follows the Chromascop color key, which includes 20 shades divided into five color groups, and 16 A-D shades and 4 whitened teeth.
- In each group, individual shades are marked with increasing numbers as the color intensity increases.
- Due to the color compatibility of Ivostar's teeth with other materials produced by Ivoclar, they can be used in the fabrication of all types of dentures.
- Ivostar and Gnathostar teeth have a layered structure that closely mimics the structure of natural teeth.
Application:
- Complete dentures.
- Partial dentures.
- Skeletal dentures.
Package:
- Flap 6 pcs.
IPS Classic Glazing Liquid 15ml
Glaze liquid.
- Liquid for changing the consistency of enamel paste, IPS Stains P, IPS Shade dyes and opaques.
Packaging:
- 15ml.
Universal Polishing Paste 100ml
Universal Polishing Paste.
- Universal polishing paste for resins and metal.
- Pink color.
Packaging:
- 100ml
IPS Classic Opal Incisal 20g
IPS Classic Opal Schneide / Incisal opalescent incisal materials.
Characteristics:
- They come in five colors S1 to S5.
Package:
- 20g.
IPS Classic V Incisal 20g
IPS Classic V Schneide / Incisal are incisal weights.
Characteristics:
- They come in four colors S1 to S4.
Package:
- 20g.
Programat S2 118V-240V/50-60Hz Promotion
Special offer:
- When purchasing the device, you will receive 10 x IPS e.max ZirCAD Prime / Prime Esthetics (type, thickness and color to choose from). Goods sent directly from Ivoclar.
The Programat S2 is a compact furnace designed for the sintering of caps, frameworks and full-contour restorations made of IPS e.max ZirCAD or other zirconia materials at temperatures up to 1600°C. Programat S2 is integrated into Ivoclar's workflow, ensuring optimally coordinated processing steps and consistently high quality results.
Benefits:
Optimized cooling shelf provides more space and better cooling.
New membrane-sealed keypad with proven color touchscreen.
OSD display extended with “cooling down” operating status.
Efficiency and reliability thanks to software optimization.
Warranty 2 years
Packaging:
- 1 piece.
Triplex Hot Monomer 500ml
Triplex Hot monomer, acrylic liquid for hot polymerization.
Packaging:
- 500ml.
IPS Classic Transparent 20g
IPS Classic Transparent are transparent materials designed to reproduce the natural appearance of the incisal edge.
Characteristics:
- They come in four colors T1 to T4.
Packaging:
- 20g.
IPS Classic Build - UP Liquid - modeling liquid 60ml
IPS Classic liquid for modeling ceramic masses L or N.
- Fluid "L" is recommended for technicians who prefer a longer working time.
- Fluid "N" is recommended for technicians who apply ceramic materials in small portions.
Packaging:
- 60ml.
IPS Classic Build-UP liquid - modeling liquid 250ml
IPS Classic liquid for modeling ceramic masses L or N.
- Fluid "L" is recommended for technicians who prefer a longer working time.
- Fluid "N" is recommended for technicians who apply ceramic materials in small portions.
Packaging:
- 250ml.
IPS Classic Opal Incisal 100g
IPS Classic Opal Incisal are iridescent masses of the incisal edge.
Characteristics:
- They come in five colors S1 to S5.
Packaging:
- 100g
IPS Classic V Transpa 20g
IPS Classic V Transpa is a transparent mass designed to recreate the natural appearance of the incisal area.
Characteristics:
- It comes in Clear and Neutral colors.
Package:
- 20g.
ProBase Hot Polymer 500g PinkV - pink with veins
ProBase Hot, an acrylic material polymerizing at elevated temperature, introduces a new quality standard for removable dentures made in the canning technique. The physical and mechanical properties of the material guarantee easy and reliable operation, regardless of the selected polymerization technique.
Features:
- Ease of use.
- Stability of shape and color.
- Fine-grained structure.
- Several polymerization methods.
- No cadmium in the dye
- Complies with EN ISO 1567.
Indications:
- Complete dentures,
- Partial dentures,
- Combined dentures
Package:
- 500g.
Chromascop Shade Guide, coloring
Chromascop shade guide - key 20 Chromascop colors in 5 groups. Chromascop can be used to define the colors of Vivadent composite materials, and Ivoclar plastic and ceramic materials.
Package:
- 1 piece.
IP Clean Hydro steam generator
Steam generator for cleaning, scalding and removing impurities (e.g. wax residues on instruments). Filling level control in the boiler; when this level drops appropriately, water is automatically pumped from the canister. With pressure regulator and pressure sensor.
Advantages:
- Automatic water intake from a separate canister.
- Ready to go at all times - the dual canister system allows refilling while in use.
- Dry and steam function.
- Adjustable steam and water flow.
- Acoustic signal when the minimum level in the reserve tank is exceeded.
- Casing and boiler made of stainless steel.
- The device has a practical drain screw, which facilitates cleaning and descaling.
Technical data:
- Sizes 24.0 x 35.0 x 38.0 cm.
- Power supply 230V, 50/60Hz.
- 24V handpiece
- Power consumption 1500W
- Tank capacity 4.8L.
- 3-4L reserve tank.
- 5L canister
- Pressure approx. 5 bar.
- Weight 15 kg.
- Steam temperature 170°C
Packaging:
- IP Clean Hydro complete with canister.
- Funnel and pin for hanging the steam gun.
Gasket for AQUA 4.5L and 7L pressure pot
Gasket Gasket for AQUA 4.5L and 7L pressure pot.
Packaging:
- 1 piece
IPS Classic V Dentin 20g
IPS Classic is a well-proven ceramic material that offers great design freedom. Due to the balanced particle distribution, the material is perfectly modelable and stable, even with several firing cycles.
Characteristics:
- V dentine is available in 16 Vita colors.
Packaging:
- 20g.
ProBase Cold Polymer 500g
ProBase Cold is a self-curing acrylic material. ProBase Cold dentures can be fabricated using two different techniques - pouring and placing. In both cases, works of the highest quality are obtained.
Features:
- Ease of working with the material.
- Permanence of shape and color.
- Two techniques of work.
- No cadmium in the dye
- Complies with EN ISO 1567.
Indications:
- Complete dentures.
- Partial dentures.
- Denture relining.
- Repairs.
Package:
- 500g.
Triplex Cold Polymer PV 500g
Triplex Cold powder, cold curing acrylic material.
Characteristics:
- Intended for making dentures using the pouring technique and for repairs.
- Polymerization should take place in a pressure apparatus for 15 minutes. at 40°C and 2-6 bar pressure.
- Color PV pink with veins.
Indications:
- Partial dentures.
- Combined dentures.
- Repairs.
- Relines.
Packaging:
- 500g
IPS Classic Glazing Paste 3g
IPS Classic Glazing Paste, glaze.
Characteristics:
- It comes in the form of a paste.
- Gives a natural mirror shine.
Package:
- Syringe with 3g of paste.
Vacuum Pump VP3 EASY - Designed to work with porcelain firing furnaces
The small and lightweight VP3 easy vacuum pump is a design specifically designed for vacuum generation in Ivoclar porcelain firing furnaces. The diaphragm vacuum pump is characterized by low weight and extremely small dimensions.
Technical data:
- Power supply: 230V / 50-60Hz
- Power Consumption: 70W
- Maximum vacuum: below 40 mbar
- Dimensions: 140 x 130 x 210 mm (W x H x D)
- Warranty 24 months.
Packaging:
- 1 piece.
Kromopan 100 impression material
Kromopan 100 - the first alginate with a chromatic binding phase indicator.
Features:
- Setting time in the mouth - 1 minute.
- The casting can be made even 100 hours after taking the impression.
Advantages:
- It allows you to prepare an impression regardless of the temperature and hardness of the water used.
Package:
- 1pc / 450g.
Agatos S quick-setting cement No. 2 30g + 18g liquid
Agatos - phosphate cement is a preparation consisting of powder and liquid. The main component of the powder is zinc oxide, and the main component of the liquid is phosphate acid, which, when mixed together in appropriate proportions, form basic zinc phosphate.
Characteristics:
- It is available in color 2
Application:
- Cementation of crowns, bridges, post and root posts.
- It can also be used to fill root canals.
Packaging:
- 30g powder.
- 18g of liquid.
Occlusal Arti-Spray Vulvar BK 288
Kalka Arti-Spray is a universal color indicator for checking occlusal contact points and the accuracy of fitting crowns and bridges. It is easy to apply, creates a thin layer of dye on the surface that can be removed with water.
Features:
- Before use, shake the container and gently spray the indicator on the occlusal surface or the inside of the crown or bridge from a distance of 3-5 cm.
- All invalid contact points can be easily recognized in the colored coating.
- Arti-Spray can also be used to check approximate contact points when fitting crowns or bridges.
- Arti- Spray contains physiologically harmless materials that meet the requirements of the foodstuff standard (LSG)
Package:
- 75 ml spray.
Electric knife Waxlectric Light I Promotion
Electric knife for modeling wax with one tip. Renfert catalog number 21500000
Technical data:
- Dimensions: 91x53x80mm
- Weight: 445g
- Temperature range: 50-200°C
- 36 months warranty.
Advantages:
- Less shrinkage in the modeled element, because the wax does not overheat and does not burn.
- Potentiometer temperature control.
- The handle is made of thermo-insulating natural cork.
- Fast heating and low heat transfer to the handle thanks to the heating element integrated in the tip.
Packaging:
- 1 piece
Meriam dental tweezers 16 cm.
Meriam dental tweezers, made of stainless steel. Length 16 cm. Double bent.
Packaging:
- 1 piece.
Pins No. 1 without Edent needle 100pcs.
Brass pins for the dental laboratory, made of the highest quality brass. Without needle No. 1 small.
- Length 21mm
Packaging :
- 100pcs
iPress - Injection molding machine for thermoplastic materials PROMOTION
The latest injection system using technology developed by Dental Flex Italia®, maximizing efficiency, safety and significantly reducing investment costs.
The control panel of the iPress injection molding machine has been designed in a clear way for the user. Two large displays facilitate visual control of the parameters of the set program from any place in the laboratory. Each button has only one function, thanks to which the operation of the device is very simple and intuitive. The iPress injection molding machine works fully automatically. After the heating cycle is completed, the cartridge is crushed by the device without the technician's intervention, and operation with compressed air from the compressor ensures stable quality of each injection. The device heats the can itself during injection - the can does not require prior heating in an oven or water bath. It is placed on the device at the beginning of the heating cycle and acquires the appropriate temperature together with the material, which allows for repeatable qualitatively and homogeneously injected dentures, making them easier to process and polish to a shine. Small dimensions allow the device to be placed anywhere in the workshop, and the installation process requires only electricity and compressed air.
The biggest advantages of the iPress injection molding machine
- Pneumatic - compressed air ensures stable injection quality in each injected prosthesis. Ability to work with pressure up to 9 Bar
- Automatic - after the end of the heating cycle, the cartridge will be crushed automatically by the device without the intervention of a technician
- Strong - the piston crushes the cartridge with a force of 650 kg, which ensures the perfect quality of the final injection. The homogeneously injected material is easier to process and polish to a shine
- It heats the can during injection - the can does not require prior heating. It is placed in the device at the beginning of the heating cycle and reaches the right temperature along with the material.
- Compact and easy to install - small dimensions allow the device to be placed anywhere in the workshop and the installation process only requires power and compressed air
Dental Flex Italia, in addition to the iPress injection molding machine, offers thermoplastic materials for partial and complete dentures Viva Flex Partials and biocompatible material for PEEK Biossis removable denture frameworks. Their physical and chemical properties make it possible to eliminate in the works: - metal retention elements - give the possibility of performing partial and complete works - completely free of harmful residual monomer
By investing in the iPress system, in addition to a solid and modern device for pressing thermoplastic materials, you receive substantive and marketing support in the form of leaflets for patients thanks to which you will interest potential customers with your new product.
Device parameters
- automatic
- injection force 650 kg
- dimensions: 16cm x 21cm x 49cm (h)
- weight 13 kg
- power supply 230V
- Working pressure 7-8 BAR
- Maximum temperature 400 C
- Piston diameter 25 mm
Packaging:
- 1 piece
Chema Hard Modeling Wax 500g
Modeling wax for making models of denture base plates.
Characteristics:
- hard wax.
- Dark pink color.
- Based on natural beeswax
Packaging:
- 500g (24 plates)
Tracing paper green spray - ECOSpray PROMOTION
Occlusion Spray decal.
- Fine-grained tracing paper for marking contact points in crowns and bridges.
- Green color.
Packaging:
- 75ml spray.
Rubber bands - blue lenses
Flexible silicone polishing rubbers.
Intended for processing:
- porcelain
- precious alloys
- acrylic.
Characteristics:
- Blue color.
- High gloss polishing.
- Fine-grained.
- Speed : 7,000- 10,000 rpm.
- Size 22x4mm
Packaging:
- 1 piece.
Adapta folia 0,6mm
Adapta, elastyczna folia 0,6 mm do wykonywania czapeczek odlewniczych.
Cechy:
- Korzystne cenowo.
- Łatwe i szybkie formowanie czapeczek koron.
Opakowanie:
- 100szt./1op.
Kondisil V-1
Kondisil V1 silicone impression material of the condensation type.
Characteristics:
- Mint flavor.
- White color.
- High density.
Advantages:
- Easy to process.
- Flexible and dimensionally stable.
- High final hardness.
Application:
- For one-step work in the office and in the laboratory.
Packaging:
- Can 1.6kg + 35ml catalyst.
Kondisil V - 3
Kondisil V-3 silicone impression material of the condensation type.
Characteristics:
- Blue color.
- low density.
Advantages:
- Easy to process.
Application:
- For correction work.
- Edge registration layer after Kondisil V-1.
Packaging:
- Tube 200g + 35ml catalyst.
Occlutec - spray occlusive paper green 75 ml.
Occlutec offers detailed and clear marking of defects in frame dentures, crowns and bridges. Thanks to the supplied tips for spraying the surface (transparent tip) and point marking (green tip), we can adjust the width of the carbon stream. This allows us to use it for various purposes. Occlutec is very fine, homogeneous and perfectly opaque, so that in most cases one use is enough. In addition, the technician retains full control over the thickness of the carbon layer. Achieving all these positives has been made possible by the development of dry spray techniques to prevent uneven application levels. The already favorable price-quality ratio has been further improved by material savings due to better pigment coverage and the application of a uniform thin layer of tracing paper. We remove the decal very quickly with steam. Occlutec comes in the two most popular colors red and green
Renfert catalog number 19350000
Function & Operation:
- Occlutec clearly and in detail highlights inaccuracies in crowns and bridges as well as frame dentures.
Advantages:
- Particular selectivity.
- Optimal dosing thanks to dry spray technology
- Homogeneous layer of sprayed material regardless of the filling of the container.
Packaging:
- 1pc /75 ml
Diamond drill bits 834 Drux turbine
Diamond drill bit for marking the grinding depth. Turbine (Ø 1.60 mm)
Package:
- 1 piece.
Remanium GM 380+ 1 pc.
Remanium GM 380 + for making standard structures with high strength. Universal use in the technique of skeletal dentures.
Chemical composition:
- Every 64.6%
- Cr 29%
- Mo 4.5%
- other SI,Mn,N,C.
- Initial melting point 1300 °C.
- Final melting point 1370 °C.
Packaging:
- 1 piece.
Remanium CS + 1 cube
Rmanium CS + alloy for ceramics does not contain beryllium. Corrosion resistant, does not change in the mouth.
Chemical composition of the alloy:
- Ni 61.0%
- Cr 26.0%
- Mo 11.0%
- Si 1.5%
- Fe,Co,Al,Ce < 1.0
Technical data:
- Yield strength Rp0.2 - 340 MPa.
- Tensile strength Rm - 580 MPa.
- Hardness HV 10 - 195.
- Total elongation at break A5 15%
- Young's modulus (modulus of elasticity) - 170000 MPa.
- Density - 8.2 g/cm3.
- WAK (25- 500 °C ) - 14 x 10 - 6 k - 1.
- Initial melting point - 1280 °C.
- Final melting point - 1350 °C.
Packaging:
- 1 piece.
Castorit Super C weight 150g 1pc
Precision investment for NiCr and CoCr alloys in the crown and bridge technique, containing phosphate for high shrinkage alloys.
Characteristics:
- It does not contain carbon and graphite.
- Very good consistency of the mixture.
- Smooth castings.
- Exact fit.
- Controlled extension.
- Easy release of castings from casting rings.
- Thermal stability.
- Application time 4 min.
Packaging:
- 150g.
Castorit Super C 1000ml - The liquid is sensitive to low temperature - shipping in winter at the customer's risk.
Castorit super C mass liquid.
Attention:
The liquid is sensitive to frost!
Shipment of goods in winter at the customer's risk.
Packaging:
- 1000ml.
Kondisil hardener 35 ml
Hardener for type C silicone impression materials.
Application:
- To the masses of Kondisil.
Packaging:
- 35ml tube.
Rubella carbide drill Drux
Drills made of high-quality cemented carbide. Rubella shape.
Package:
- 1 piece