Kromopan 100 impression material

Kromopan 100, the first alginate with a chromatic setting phase indicator.

Characteristics:

• Setting time in the mouth - 1 minute;
• A cast can be made even 100 hours after the impression is taken.

Advantages:

• It allows you to prepare an impression regardless of the temperature and hardness of the water used.

Packaging:

• 1pc/450g

Kondisil V-1

Kondisil V1 condensation type silicone impression material.

Characteristics:

• Mint flavor;
• Color white;
• High density.

Advantages:

• Easy to process;
• Flexible and dimensionally stable;
• High final hardness.

Application:

• For single-stage work in the office and laboratory.

Physical data:

• Shore hardness immediate: 70;
• Shore hardness after 2h: 79;
• Max. compression strain: 1.3%;
• Memory after deformation: 98.6%;
• Linear dimensional change: 0.2%.

Packaging:

• 1.6kg can + 35ml catalyst

Kondisil V - 3

Kondisil V-3 silicone impression material of the condensation type.

Characteristics:

• Blue color.
• low density.

Advantages:

• Easy to process.

Application:

• For correction work.
• Edge registration layer after Kondisil V-1.

Packaging:

• Tube 200g + 35ml catalyst.

Kondisil hardener 35 ml

Hardener for type C silicone impression materials.

Application:

• To the masses of Kondisil.

Packaging:

• 35ml tube.

Spatula for impression material and plaster

Zhermack plastic spatula for alginate or plaster.

• Available in various colors.

Packaging:

• 1 piece.

Universal Tray Adhesive 10ml

A material that improves the adhesion of the silicone impression material to the tray.

Universal Tray Adhesive for use on all types of trays.

Packaging:

• 1pc/10ml.

Zhermack alginate bowl

Silicone bowl for mixing alginate masses.

Advantages:

• Flexibility for easy mixing.
• Intended for use with alginates.
• Green color.
• Easy to clean.

Packaging:

• 1 piece.

Zerosil Soft 2x500 ml tubes

Zerosil soft, a polyaddition vinylsiloxane impression material.

A cost-effective alternative to alginate materials for impressions for frame dentures and individual trays.

Indications:

• Situational impressions;
• Single-phase and single-stage two-layer impressions;

Technical data:

• Orange color;
• Final hardness: 40 Shore A;
• Processing time: 2:00 min;
• Oral period: 2:00 min;
• Consistency: medium – type 2;
• Compatible with all plasters.

Packaging:

• 2x500ml

Zetaplus 900ml impression material

Zetaplus impression material.

• Condensation type silicone impression material.
• For use with the Indurent Gel 60ml catalyst.

Characteristics:

• Material intended for the first layer of a two-layer impression.

Advantages:

• Reduces the tension of the oral mucosa.
• High final hardness is a unique advantage in the two-layer, two-time impression technique.
• In the two-layer, simultaneous impression technique, the material adapts to the consistency of the lower viscosity correction layer.

Packaging:

• 900 ml (1530 g).

Oxasil Mucosa 140 ml

Oxasil Mucosa 140ml is a polysiloxane impression material intended for use in dental offices and prosthetic laboratories.

• The Oxasil Mucosa mass in combination with the Oxasil Activator Paste is used for taking impressions, the so-called The second layer in one-time impressions and individual impressions with complete edentulism.

• Oxasil materials very accurately reproduce the details of the impression taken. Thanks to the silicone-based elastomeric materials used, they are characterized by good stretch and succumb to all stresses and pressures.

Packaging:

• tube 140 ml

Orthoprint - alginate mass for impressions 500g

Orthoprint monochromatic alginate mass is intended for impressions in orthodontics when preparing removable braces.

• Alginate mass is characterized by very high elasticity and short setting time in the oral cavity, which makes working with it as comfortable as possible for the dentist and minimally invasive for the patient. The delicate flavor of vanilla soothes the vomiting reflex, and the mass does not melt in the mouth. Orthoprint also has thixotropic properties.

• The mass does not contain heavy metals, absorbs water very quickly and is easy to mix. The consistency of a non-spraying powder makes it easier to work with the product.

Advantages:

• High flexibility.
• Short setting time in the mouth: 45 sec.
• Total setting time: approx. 1 min. 50 sec.
• Vanilla scent.
• Prevents vomiting.

Packaging:

• 500g.

Pink Zhermack mixing tips, 1 piece or 48 pieces

Pink mixing tips.

• Length 6.8mm.

Packaging:

• 1pcs or 48pcs

System S-50 mixing tips

Mixing tips for impression materials. System S 50.

Package:

• 100 pcs

Zetaplus Intro Kit (Zetaplus + Oranwash + Indurent)

The kit consists of the following materials:

• Zetaplus material intended for the first layer of a two-layer impression. Mass with increased hardness and resistance to deformation. It is a C-silicone produced on the basis of special spheroidal fillers, which facilitate the flow of the mass to hard-to-reach places in the prosthetic field. High final hardness is a unique advantage in the technique of two-layer two-time impression. In the technique of two-layer one-shot impression, the material is adapted to the consistency of the correction layer with a lower viscosity.

• Oranwash L- (condensing) silicone with high fluidity. Due to the short time of working and taking an impression, it is recommended as a corrective mass in the technique of two-layer impressions. It is recommended to use Zetaplus as the base mass.

• Indurent Gel is a universal catalyst for the base mass and correction mass type C. Indurent can be used for almost all condensation silicones produced by the Zhermack company (except for the impression materials of the Zetaflow line).

Package:

• Zetaplus 900 ml.
• Oranwsh 140 ml.
• Indurent Gel 60 ml.

Elite HD+ Putty Normal 250ml+250ml

Elite HD + Putty - silicone impression material of the addition type intended for the first layer of two-layer impressions. The use of innovative nanotechnology enables very precise reproduction of details. The mass is characterized by fluidity, breaking strength, resistance to deformation and temperature. Thanks to its properties, accurate reproduction is possible even in a humid environment.

Characteristic:

• For hand mixing.
• High precision and dimensional stability.
• High hardness after setting.
• Orange color.

Packaging:

• 250ml of base + 250ml of catalyst

Elite HD + II layer

Elite HD + II layer hydrocompatible silicone addition impression material of low viscosity (light) and medium (regular) intended for the second layer of two-layer, two-time and simultaneous impressions. The selection of contrasting material colors allows you to see the smallest details. Elite HD + impression materials have excellent plasticity, high dimensional stability and tear resistance.

Characteristic:

• Mixing ratio 1: 1.
• Hydrocompatible.
• Thixotropic.
• Blue (light), purple (regular) colors.
• For dispensing into the impression material gun.

Package:

• 2x 50ml.
• 12 mixing tips.

Tropicalgin impression material 453g

Alginate chromatic impression material. Changes color from red to yellow. It has the consistency of powder. It does not contain heavy metals and does not melt in the mouth. It guarantees exceptional impression accuracy. The pleasant and unique scent of exotic fruits provides comfort to patients. Intended for taking impressions when making fixed and frame partial dentures, for diagnostic models. The material has a 5-year warranty. It complies with international standards ISO 1563. It also has the European CE safety mark.

Advantages:

• Chromatic.
• Dust-free.
• Pleasant scent of exotic fruits.

Application:

• For impressions when making removable dentures.
• For impressions of diagnostic and working models.
• For preparing opposing impressions when making fixed and removable dentures.

Characteristics:

• Mixing time 45 sec.
• Setting time on a spoon: 2 minutes. 35 sec.
• Setting time in the mouth 1 min.

Packaging:

• 1 pack/453 g.

Indurent gel 60ml - activator for Zetaplus silicone, Oranwasch

Indurant gel. To be used only with silicone materials for use in the oral cavity.

Zetaplus silicone activator, Oranwasch.

Packaging:

• 60ml.

Oranwash L 140 ml

Oranwash L impression material.

Condensation silicone with a liquid consistency. It is recommended to use Zetaplus as a base mass.

Characteristics:

• Mixing time 30 sec.
• Working time from the beginning of mixing 1 min. 30 sec.
• Setting time in the mouth: 3 min. 30 sec.
• Total setting time at 23°C: 5 min.
• Deformation under compression: 2% - 8%
• Material memory more than 99%
• Dimensional stability better than - 0.7%

Advantages:

• Short working time and impression taking - ideal for the two-time impression technique.
• Fluidity ensures excellent penetration into tooth pockets.
• Hydrocompatibility means that the presence of saliva and blood in the prosthetic field does not affect the quality of the impression.

Packaging:

• Tube 140 ml.

Fixing ring for inserts with impression material 380ml

Attachment for using 380 ml cartridges.

Packaging:

• 1pc

Mixing tips gray (formerly yellow) Zhermack 1 piece or 48 pieces

Tips for silicone masses.

• The new delivery system is open: new mixing tips work on existing cartridges, and current mixing tips work on new cartridges.

Packaging:

• 1pcs or 48pcs

Putty Cut - a cutter for impression material

Putty cut.

• A knife for cutting out interdental partitions and retention canals for the second layer of impression material in the base impression.

Packaging:

• 1 piece

Blocks for mixing and mixing impression materials

Blocks for making impression materials.

Dimensions:

• 9 x 16 cm

Packaging:

• 1 piece

Spatula for silicone masses

Metal spatula for mixing silicones.

• Comfortable wooden handle, easy to clean and disinfect.

Packaging:

• 1 piece.

Oral Tips yellow 1 piece or 48 pieces

Oral Tips intraoral tips for light silicone materials, used for precise application of the material. It is applied to the mixing tip.

Packaging:

• 1pcs or 48pcs

Hydrogum 5 impression material 435g

Hydrogum 5 is a modern, monochromatic, alginate impression material, intended for taking impressions when making fixed and frame partial dentures and for diagnostic models. Packed without access to air in an argon atmosphere, which allows closed packaging to be stored for many years without changing its properties.

Characteristics:

• The mass does not contain heavy metals.
• It does not melt in your mouth and is very precise.
• Short working and setting time and an exceptionally pleasant smell of exotic mangosteen fruit guarantee the doctor's satisfaction and the patient's comfort.

Packaging:

• 1pack/453g.

Millenium alginate mass 450g.

Description:

• Millenium is an impression material with very high precision. The use of Millenium mass allows for the highest accuracy in the preparation of crowns and bridges.

Perfect for flexible impressions. Preparation time is 1 min. 45 sec. Store the impression material in the original packaging closed with a clamp.

Parameters:

• Grain: 15μ
• Elastic deformation reversibility: 96.2%
• Spatial stability: 100 hours
• Preparation time: 1 min. 45 sec.
• Mixing time: 45 sec
• Mechanical mixing: 10-15 sec
• Net volume after mixing: 1250 ml

**Package: **

• 450 g

Detax greenbite color 2x50ml

Greenbite color bite registration material.

Based on silicone A, with visual bonding control. Medium consistency - medium thick, thixotropic. Direct application to teeth.

Advantages:

• The color change from green to yellow means that the binding process is completely completed.
• Short time in the mouth (50 sec.).
• Maximum final hardness approx. 45 Shore D.
• Easy processing (cutting, grinding).
• Class I medical device.
• Color: Blue base, Yellow catalyst 1:1
• Apple flavored!

Packaging:

• 2 x 50 ml base + catalyst
• 8 green mixing tips
• 8 application tips

Detax Detaseal® antilock fast 50 ml

Silicone for blocking gingival spheres. Detaseal® antilock: Does not combine with polyether impression materials, condensation-hardened silicones and alginates. Make sure the material is sufficiently thick.

Facilitates the safe removal of the impression from the mouth, even when there are clear retention areas in the impression area. For versatile use in undercut areas (wide open interdental spaces, pontic bridges or bar structures, loose teeth with reduced stability, etc.) To prevent locking in grooves gums, they can be filled with Detaseal® antilock material for easier removal of the simultaneous impression. Do not apply Detaseal® antilock to the zones from which the impression is being prepared. Use only as blocking material. Solutions used before the impression (e.g. retraction solutions) may influence the bonding reaction and must therefore be completely removed.

Advantages:

• Short residence time in the mouth: 1.25 minutes.
• Very flexible when removing from the mold, tear-resistant.
• Color: Base - pink, catalyst - white.

Packaging:

• 1x 50ml.
• 6x yellow mixing tips.
• 6x oral tips.

Detax greenbite apple 2x50ml

Greenbite apple bite registration material.

Based on A-silicone, medium consistency - medium thick, thixotropic. Applied directly to the teeth, it does not flow into the interdental spaces and is easily removed from the oral cavity.

Advantages:

• Short time in the mouth (60 sec.)
• Maximum final hardness, approx. 45 Shore D.
• Easy processing.
• Class I medical device.
• Color: Green base, Yellow catalyst 1:1.
• Green apple flavor!

Packaging:

• 2x50ml Base + catalyst
• 8 green mixing tips
• 8 application tips

Detax Detaseal® function 2x80ml

The first type A silicone for functional impressions on individual trays and on tray rims.

Advantages:

• Perfect, smooth and flexible.
• A specific plastic phase of 2, 30 minutes for plastic shaping and an extended hardening phase in the mouth of 4 minutes allow for comfortable performance of all functional movements.
• It provides precise detail and accuracy in measuring functional muscle movements without disturbing soft tissues.
• Class I medical device.
• Color: Red base, Yellow catalyst 1:1

Packaging:

• 2x80 ml base and catalyst
• A syringe for applying material to a spoon.

Detax glassbite 1x50ml

Glassbite material for bite registration.

Based on silicone A. Medium consistency, thixotropic. Direct application to teeth.

Advantages:

• Short time in the mouth (60 sec.).
• High final hardness, approx. 80 Shore A.
• It is also suitable as a matrix material when light-curing composites or when positioning auxiliary parts.
• Color transparent.
• Easy to process (cutting, grinding).
• Class I medical device.

Packaging:

• 1x 50ml
• 4 green mixing tips.
• 4 application tips.

GC Exaclear 2x48ml

Exaclear is an innovative, transparent silicone material, created to meet the requirements of high aesthetics, while facilitating the achievement of perfect results.

Characteristics:

• High transparency provides excellent visual control of the visibility of details and very effective light curing by silicone.
• Optimum consistency.
• Perfectly reproduces the details as the product becomes liquid during insertion to perfectly adapt to the preparation.
• Silicone is very easy to cut or drill using the injection molding technique.
• It has very good tear strength while being flexible enough to be removed from the mouth.

Application:

• Temporary work on crowns and bridges.
• Placement of brackets or fibers - easy transfer from the model to the oral cavity.
• Application of layered composite - easy light curing from the palatal side.

• Bite registration.

  Packaging:

• 2 x 48ml, 6 x mixing tips

Detax Detaseal® hydroflow lite 2x50 ml

Precise silicone mass for Hydroflow impressions for the two-layer, one-stage technique and the two-layer, two-stage technique.

Advantages:

• Accurate reproduction of the smallest details, even in wet areas. "Perfect Flow".
• Thixotropic bond with exceptional flowability.
• Thermosensitive binding properties (SnapSet) ensuring short residence time in the oral cavity.
• Maximum elastic properties after stretching, high elasticity when demoulding, extremely tear-resistant.
• Class I medical device
• Color: Pink base, white catalyst 1:1.
• Recommended for two-layer, one-time techniques.

Regular set:

• Mixing time: 2 min.
• Working time in the mouth: 2 min.
• Total working time: 4 min.

Fast set:

• Mixing time: 1 min.
• Working time in the mouth: 1.30 min.
• Total working time: 2.30 min.

**Packaging:

• Base + catalyst 2 x 50 ml.
• Yellow mixing tips, 12 pieces.

Detax Detaseal® hydroflow putty Fast 2x250ml

Dentaseal hydroflow putty Fast impression material, first layer for preliminary impressions.

Advantages:

• Very good consistency, easy to knead.
• Soft initial consistency for excellent mixing results.
• It is ideal for preliminary impressions in the double impression technique and as a material for trays in the double-mix technique.
• Convenient and easy to dismantle thanks to: high elastic deformation with medium final hardness and maximum tensile strength.
• Time saving, short mixing time and time in the mouth (only 2 minutes!)
• Neutral taste.
• Class I medical device.

• Color: Apple green base, white catalyst 1:1

• Mixing time: 30 sec.

• Residence time in the mouth: 2 min.
• Total hardening time: 3.30 min.

Packaging:

• 2x250 ml base + catalyst

Stomaflex Light 130g

Stomaflex Light is a high-quality impression material. It is part of the Stomaflex system by SpofaDental, consisting of classic putty, low-density (light) mass and a liquid or gel catalyst. It provides perfect reproduction of the details of the prosthetic field, comfortable use and high resistance to moisture.

Application:

• second layer mass in simultaneous impressions (sandwich technique),
• stump injection mass / correction mass in two-time impressions,
• functional impressions on individual trays with complete toothlessness,
• checking the alignment of crowns and bridges.

Benefits:

• perfect quality of each impression,
• perfect reproduction of details, also in a humid environment,
• reduced sensitivity to latex gloves,
• contrasting color of the catalyst facilitating the obtaining of a homogeneous mixture,
• easy dosing and short mixing times with the use of gel catalyst

Package:

• tube 130 g

Stomaflex gel catalyst 60g

Stomaflex Gel Catalyst is a universal gel catalyst for silicone impression materials with a condensation bonding method.

Package:

• Tube 60g

Elite Glass 2x50ml + 6 mixing tips

Elite Glass is an addition silicone for making transparent forms intended for the polymerization of light-curing materials used for direct and indirect aesthetic reconstruction.

High transparency and adequate working time make Elite Glass particularly effective in various clinical situations: for creating molds directly in the patient's mouth (e.g. for discoloration) or indirectly, on the model (e.g. closing a diastema, correction of rotated teeth, enamel cracks , tooth structure irregularities, temporary crowns).

Characteristic:

• Dimensional stability during and after disinfection.

• High final hardness (70 Shore A).

• Unchanged shape and ability to be placed back in the mouth (together with the polymerized material).

• Easily processed with cutters after polymerization.

Advantages:

• High transparency of the material.

• Perfect polymerization of light-cured materials used for reconstruction.

• High-quality aesthetic reconstruction.

• Versatility of use.

Packaging

• 2x50 ml + 6 mixing tips

4:1 impression gun

Feeder for silicone impression materials and materials for temporary crowns in a 4:1 ratio

Packaging:

• 1 piece

Gun for 1:1, 2:1 impression materials

Feeder for silicone impression materials in 1:1, 2:1 proportions.

Packaging:

• 1 piece

Zerosil Soft 2x875ml tubes

Zerosil soft, a polyaddition vinylsiloxane impression material.

A cost-effective alternative to alginate materials for impressions for frame dentures and individual trays.

Indications:

• Situational impressions;
• Single-phase and single-stage two-layer impressions;

Technical data:

• Orange color;
• Final hardness: 40 Shore A;
• Processing time: 2:00 min;
• Oral period: 2:00 min;
• Consistency: medium – type 2;
• Compatible with all plasters.

Packaging:

• 2x875ml

Regofix Transparent 2x50ml

Transparent bite registration material.

Application:

• Ideal for controlled bite registration in difficult conditions;
• To be used as a form for making temporary crowns;
• For the production of X-ray splints.

Physical data:

• Final hardness 70 Shore A;
• Consistency type 2 - medium density;
• Preparation time 40 sec;
• Setting time 120 s;
• Material memory >99.9%;
• Elastic deformation 2.5%;
• Dimensional stability <0.02%;
• Color - transparent.

Packaging:

• 2x 50ml

Dynax Light 2x50ml

Dynax light additive material for corrective impressions, can be combined with Dynax® clear, putty, heavy body and mono.

Tip:

• Dynax® materials are perfectly matched to each other! To obtain the best detailed impression, we recommend using Dynax® light only with the hydrophilic base material Dynax® putty and Dynax® heavy body.

Characteristics:

• Hardness 46 shore A;
• Processing time 90 sec;
• Setting time 90 s;
• Color emerald green.

Packaging:

• 2x50ml
• 6 x mixing tips

Dynax Heavy Body 2x50ml

A material based on addition silicones used to prepare precise preliminary impressions.

Characteristics:

• Non-sticky, optimal consistency;
• Hardness 70 shore A;
• Processing time 90 sec;
• Setting time 90 s;
• Colour blue.

Application:

• Suitable for sandwich, corrective and standard impressions, double-mix technique and functional marginal impressions:
• Can be combined with Dynax Light;
• Recommended for patients with residual teeth suffering from periodontitis;
• Thixotropic.

Packaging:

• 2x50ml
• 6x mixing tips

StoneBite 2x50ml silicone for bite registration

StoneBite is an elastomer-based addition silicone for bite registration with a high final hardness of 48 Shore D (very hard).

Very precise and stable in processing.

The orange color perfectly enhances contrast.

Application:

• Bite registration.

Physical properties:

• Final hardness 51 Shore D;
• Consistency according to ISO 4823 Type 2 - medium density;
• Preparation time 30 sec;
• Setting time 80 s;
• Material memory 99.9%;
• Elastic deformation < 2%;
• Dimensional stability < 0.1%;
• Orange color.

Packaging:

• 2x50ml
• 12 mixing tips
• 12 application tips

StoneBite Scan for bite registration 2x50ml

Bite registration material based on polyaddition silicone.

It can be scanned and is suitable for CAD/CAM technology.

Characteristics:

• Final hardness 32 Shore D;
• Thixotropic;
• Removable after an extremely short retention period inside the oral cavity (60 s);
• Better cutting and milling properties;
• Perfect for scanning.

Physical properties:

• Final hardness 32 Shore D;
• Consistency according to ISO 4823 Type 2 - medium density;
• Preparation time 30 sec;
• Setting time 80 s;
• Material memory 99.9%;
• Elastic deformation < 2%;
• Dimensional stability < 0.2%;
• Colour grey.

Packaging:

• 2x50ml
• 12 mixing tips
• 12 application tips

Gun for pressing mass 1:1, 2:1 Dreve

Feeder for silicone impression materials in proportions 1:1 and 2:1

Packaging:

• 1 pc.

Mixer Yellow Mixing Tips

Mixing tips for silicone mass 5: 1 380ml.

Package:

• 1 piece.

Oxasil Activator Paste 60ml

This activator is recommended for use with the Oxasil Soft Putty base mass as well as with the so-called second phase Oxasil Very Light Flov and Oxasil Mucosa.

Packaging:

• tube of 60 ml

Dreve pink mixing tips 1pc or 40pcs

Pink mixing tips.

Fits the Dosper Evo silicone mixing device.

• Length 5.4mm.

Packaging:

• 1pc or 40pcs