Sirio brass box
This is a classic case in 4 parts, for full dentures.
The particular shape, which mirrors the shape of the prosthesis, allows the use of a minimum amount of plaster, thus optimizing consumption and reducing shrinkage.
The can is made of pressed brass.
Packaging:
- 1pc
BEGO Silicone Duplication Cup
Tin for duplicating models in silicone (small).
Characteristics:
- precise reproduction;
- material savings;
- dimensional stability;
- three interchangeable palate shapes that significantly support the accuracy of reproduction and enable extremely economical use of silicone thanks to flexible positioning.
Packaging:
- 1pc.
Larident can scoop
Canning ladle.
Characteristics:
- size 13x12cm;
- height 30 cm;
- made of steel;
- wooden handle.
Packaging:
- 1 pc.
Large polymerization can-Konopka
Polymerization box for making acrylic dentures.
Characteristics:
- made of high quality brass;
- very durable;
Technical data:
- base diameter - 112mm;
- total height - 61mm;
- wall thickness - 5.5mm;
- weight: 1600g.
Packaging:
- 1pc.
DFS Okklamat sphincter for relining
Frame for quick relining of partial and full dentures.
For any polymerization method.
Made of extremely durable acrylic, reinforced with mineral microfibers and resistant to temperatures up to 180°C.
Packaging:
- 1pc.
Kit for the can-free technique of duplicating models
Starter kit for the tin-free model duplication technique.
Characteristics:
- greater profitability of work, lower material costs (up to 60% lower silicone consumption);
- increased efficiency thanks to shorter work cycles;
- higher quality and profit compared to using gel;
- greater accuracy of the investment model due to the elimination of difficulties in bond expansion;
- easier release of the duplicate model;
- precise technique without the need to invest in expensive equipment.
Packaging:
- fixator - a fixing device;
- 3 stabilizing plates;
- tape with adhesive strip 40m;
- Hinrisil Speed 1kg + 1kg. - silicone for duplicating models;
- Hinrisol 250 ml - alcohol-based liquid for reducing the tension of silicone surfaces before casting the model from the investment material;
- crepe tape 25 m - for embedding skeletal prostheses;
- instructions for use;
- EH Dental catalogue.
Silicone model duplication box
A box for duplicating models in silicone.
Characteristics:
- fast and comfortable work;
- saves time and materials.
Packaging:
- 1 pc.
Height adjustable model duplication box
DREVE tray for duplicating models in silicone.
Characteristics:
- optimal shape of the cuvette with the possibility of adjusting the upper part to save silicone.
Packaging:
- 1 pc.
Castdon can for pouring method
Drip method container with transparent top, steel bottom plate with integrated chambers for removing wax from teeth.
The set includes a device for piercing channels, Ø 8 mm.
Packaging:
- 1 pc. can
- 1pc. Channel cutting tool Ø 8mm
SU Brass box large
Brass polymerization can.
Dimensions:
- height 68mm;
- width 98mm;
- depth 98mm;
- weight 1.6 kg.
Packaging:
- 1pc.
POLYPOT frame repair box
Pressure can for denture repairs, with frame.
Pressure pot made of compact, thermostable plastic.
Characteristics:
- the maximum working pressure of 2 bar is generated manually by turning the safety screw downwards, which exerts pressure on the cover and therefore on the water.
- for polymerizing all self-curing resins up to 50 °C (e.g. repairs, relining).
Technical data:
- inner diameter of the pot: approx. 100 mm;
- height of usable space: approx. 65 mm;
- gross weight: approx. 1.3 kg;
- black or transparent.
Polymerization:
- water temperature: 50 °C;
- pressure load: 2 bar;
- Polymerization time: 12-15 min.
Packaging:
- 1pc.