Can for iPress injection molding machine
Very strong can, milled from a single block of aluminum.
Parameters:
- Allen key for loosening or tightening screws;
- 4 mounting screws;
- Size 15.5x8x12cm (LxWxH);
- Weight 1.6kg.
Packaging:
- 1 pc can
- 1 pc Allen key
Aluminum tubes Ø 24mm height 110mm 30 pieces
Disposable empty aluminum tubes intended for injection of thermoplastic materials. The special design of the plug guarantees safe and reliable material injection.
- Diameter 24mm
- Height 110mm
Packaging:
- 30 pcs
Aluminum tubes Ø 22mm height 90mm 30 pieces
Disposable empty aluminum tubes intended for injection of thermoplastic materials. The special design of the plug guarantees safe and reliable material injection.
- Diameter 22mm
- Height 90 mm
Packaging:
- 30 pcs
Aluminum tubes Ø 22mm height 120mm 30 pieces
Disposable empty aluminum tubes intended for injection of thermoplastic materials. The special design of the plug guarantees safe and reliable material injection.
- Diameter 22mm
- Height 120mm
Packaging:
- 30 pcs
Villacryl Thermo Iso-clear light-curing insulator 30ml
Villacryl Thermo Iso-clear
High temperature resistant light-cured insulator.
Perfect for all types of thermoplastics.
Packaging:
- 30 ml.
Thermo Flexi-J Primer 30 ml
Thermo Flexi-J Primer. Primer combining thermoplastic materials based on polyamides. Useful for re-injecting buckles, repairs or relining.
Packaging:
- 30ml.
Villacryl Thermo Multi Spray 400ml
Universal grease for cans, cartridges and aluminum tubes. The material, whose production uses high-quality raw materials without solvents, is available in a convenient aerosol.
Advantages:
High temperature resistant, Villacryl Thermo Multi Spray can be used as a release agent for all types of injection molding machines injecting thermoplastic materials for dentures.
It is perfect as a lubricant used for cartridges and aluminum tubes filled with thermoplastic material immediately before the injection process.
After spraying, it creates a thin, high-temperature-resistant slip layer on the surface, ensuring protection of the injection molding machine's heating chamber against seizure. By using it, the chances of a trouble-free injection process increase.
It does not contain solvents and does not leave any residues in the heating chamber, making it suitable for all types of injection molding machines.
Additionally, it can be used as an agent that increases the life of injection or polymerization cans, insulates surfaces from plaster and preserves them to prevent rusting or tarnishing.
Packaging:
- Spray capacity 400 ml
Aluminum tubes Ø 24mm height 80mm 30 pieces
Disposable empty aluminum tubes intended for injection of thermoplastic materials. The special design of the plug guarantees safe and reliable material injection.
- Diameter 24mm
- Height 80mm
Packaging:
- 30 pcs
Gypsum class IV. Marble Stone Evolution - expansion gypsum in pressure injection processes 3kg
Special double-expansion plaster for duplicating models.
Characteristic:
- White color.
- It does not require the use of a special liquid, mixed with demineralized water.
- Dedicated to work with devices injecting thermoplastic materials.
Packaging:
- 3kg
Izolator Gyplux
Charakterystyka:
- Lakier stosowany na powielony model gipsowy, zapewnia idealnie gładką i błyszczącą powierzchnię do śluzówkową w protezach acetalowych, nylonowych, oraz w innych protezach z tworzyw termoplastycznych.
- Polimeryzuje pod wpływem światła UV)
Opakowanie:
- 30ml , lub 50ml
Acetal - polymerization can type J100
Universal box for standard work for the J 100 injection molding machine.
Package:
- 1 piece.
Metal cork for nylon
Injection cartridge closing plug with nylon material prevents material from flowing into the device.
Package:
1 piece.
Walce aluminiowe z korkami J100 - 22mm
Aluminiowe, jednorazowe łuski o średnicy 22mm z korkami teflonowymi do wtryskarek.
Opakowanie:
- 1 sztuka walec + 1 korek
Acetal - Izolator silikonowy - Tube Lubricant
Charakterystyka:
- Izolator silikonowy do prac w wysokiej temperaturze.
- Tylko do urządzeń : ACTIO, J-100, J-200
Opakowanie:
- 50 ml (cc)
MaxiFresh cleaning tablets 24 pieces
MaxiFresh cleaning tablets.
- For professional and home cleaning and care of whitening trays, retainers, relaxation trays, bruxism trays and sports trays.
Advantages:
- Reduces discoloration;
- Refreshes the surface and eliminates unpleasant odors;
- Saves material because it does not contain abrasives;
- Increased life of the toothbrush with daily cleaning.
Use:
- Place a Maxi-Fresh cleaning tablet in a container filled with 150 ml of water at a temperature of approximately 37°C (colder water may prolong the tablet dissolution process);
- Once the tablet has completely dissolved, place the splint in the vessel for at least 45 minutes;
- Once the cleaning process is complete, rinse the rail under running water and dry the surface.
Packaging:
- 24 pcs.
Walce aluminiowe (22mm)
Aluminiowe, jednorazowe łuski, bez korków średnica 22 mm ,do wtryskarek.
Opakowanie:
- 1szt.
Walce MAXI z korkami 25mm
Aluminiowe, jednorazowe łuski o powiększonej średnicy (25mm) z korkami teflonowymi do wtryskarek
Opakowanie:
- 1sztuka walec + 1 sztuka korek.
Acecril acetal/acrylic glue
An adhesive that provides a chemical bond between acetal and acrylic.
Characteristics:
- strengthens and improves the retention of acrylic saddles in acetal skeleton prostheses;
- prevents the acrylic from peeling off the acetal surface and the accumulation of food residues in the denture;
- do not use on acrylic teeth, the glue is only suitable for use with monomer-polymer acrylic.
Packaging:
- Component A: 10ml + Component B: 8ml
Acetal-can type 200
Acetal type 200 can Injection and polymerization of all acrylic resins
Thanks to the 200-type can, two dentures can be made and polymerized simultaneously in record time in just 30 minutes
Package:
1 piece.
Opaska pierścienia bakielitowego A-20/II
Mosiężna opaska chroniąca pierścień bakelitowy przed pękaniem.
Opakowanie:
- 1szt
Silicone spray for injection molding machines
Aerosol silicone to lubricate the cartridge before inserting it into the injection molding machine. Reduces friction during injection.
Packaging: 400 ml
Tubes 22mm with a cap
Empty tubes with a cap for injection of thermoplastic materials.
Data:
Diameter 22mm.
Size M and L
Package:
1pc tube
1pc cap
Keramo nylon cutter 88701
Keramo cutter for soft materials and nylon.
Keramo drills are manufactured directly from zirconium oxide powder using unique additive manufacturing technology.
This manufacturing process ensures longer life and stability.
Keramo drills are best suited for soft materials and nylon.
Packaging:
- 1pc.
Keramo cutter for nylon 887301
Keramo cutter for soft materials and nylon.
Keramo drills are manufactured directly from zirconium oxide powder using unique additive manufacturing technology.
This manufacturing process ensures longer life and stability.
Keramo drills are best suited for soft materials and nylon.
Packaging:
- 1pc.
Gypsum III class Hinrizit E expansion white 5kg
Hinrizit E is a dental plaster with a special formula and high bond expansion. This special plaster is used for the production of models and for casing plastic dentures. Due to its large bond expansion, it evens out the shrinkage of the materials from which dentures are made (e.g. SR Ivocap Injection System, Acetal, Deflex, FJP, Valplast). Hinrizit E can be used for all denture plastics.
Application:
- Technique of producing plastic prostheses.
Features:
White color.
Water:gypsum ratio - 25:100
Mixing time in min. - 5-6.
Hardening time in min. - 10-12.
Expansion in the setting process – 0.60.
Compression resistance after 1 hour. - 30 MPa.
Dry compression resistance - 60 MPa.
Packaging:
- 5kg.
Viva Flex Silicone insulator for aluminum tubes
Silicone insulator for Viva Flex injection molding machine.
Package:
- 30g
Viva Flex Shade guide VF/LF
One of the many advantages of flexible dentures is the aesthetic factor. The colors offered are so natural that they become virtually invisible in the mouth. However, choosing the right color accurately can be difficult. The color scale helps the doctor and technician select the appropriate color they want to use.
Advantages:
- True color reproduction.
- 7 colors for Viva Flex Partials LF.
- 5 shades for Viva Flex dentures.
- Convenient and portable.
Packaging:
- 1 piece
Tubes with cap ø 22mm Viva Flex
Empty aluminum cartridges with a cap intended for preparing an injection cartridge. Made of high-quality aluminum.
Parameters:
- Weight 7 grams.
- Material capacity up to 25 grams.
- Available diameters: 22 mm and 25 mm.
Packaging::
- 1pcs tube + cap
Tubes with cap ø 25mm Viva Flex
Empty aluminum cartridges with a cap intended for preparing an injection cartridge. Made of high-quality aluminum.
Parameters:
- Weight: 7 grams.
- Material capacity up to 25 grams.
- Available diameters: 22 mm and 25 mm.
Packaging::
- 1pcs tube + cap
Viva Flex denture hygiene box
Denture container with a convenient removable basket that allows you to remove the denture without contact with water or solution.
Characteristics:
- Can comfortably accommodate 2 dentures.
- Dimensions: 8.5 x 7.5 x 7 cm.
- Weight: 72 gr.
- Color: white with logo
Packaging:
- 1 piece
Silicone spray for injection molding machines 500ml
UNIVERSAL SPRAY thermal grease 500ml
- Thermal spray for coating aluminum tubes before injection.
- It creates a thin layer that protects the tubes against seizure in the chamber.
- It does not burn.
- Odorless.
Package:
- 500 ml
Aluminum tubes Ø 25mm height 100mm 30 pieces
Disposable empty aluminum tubes intended for injection of thermoplastic materials. The special design of the plug guarantees safe and reliable material injection.
- Diameter 25mm
- Height 100mm
Packaging:
- 30 pcs
Aluminum tubes Ø 25mm height 75mm 30 pieces
Disposable empty aluminum tubes intended for injection of thermoplastic materials. The special design of the plug guarantees safe and reliable material injection.
- Diameter 25mm
- Height 75mm
Packaging:
- 30 pcs