Product Code: 7657
Qty: Out Of Stock
IPS Empress CAD for Cerec/InLab LT I 12/5pcs
Ivoclar Technical

82.77€ +vat105.16€

89.39€ incl tax

IPS Empress CAD for Cerec/InLab LT I 12/5pcs

Leucite-reinforced glass-ceramic blocks consisting of a glassy and a crystalline phase. They are used to perform an extremely aesthetic, completely anatomical reconstruction of a single tooth, using CAD/CAM technology in the Cerec system and in the laboratory system. Due to the difference in thermal expansion coefficients (CTE) between the glass phase and the crystal phase (leucite), compressive stresses in the glass phase arise during cooling after sintering. This mechanism increases strength, giving IPS Empress CAD a flexural strength of 160 MPa

Advantages:

  • Good fit accuracy;
  • homogeneous surface;
  • high strength;
  • Exact color match with the shade guide.

Technical properties:

  • CTE (100- 400°C) [10-6-K]CTE} - 16.6
  • CTE (100- 500°C) [10- 6K] - 17.5
  • Bending strength (biaxial) - 160
  • Crack resistance [MPa m0.5] - 1.3
  • Vickers hardness - 6200
  • Chemical solubility [ug/cm2] - 25

Indications:

  • Anterior and lateral crowns
  • Partial crowns
  • Veneers

IPS Empress CAD LT (Low Translucency) LT blocks are available in 9 of the most popular AD scale shades and 4 shades for teeth after bleaching Bleach BL. Thanks to their high brightness, higher than in the case of HT blocks, they are ideal for making larger restorations (e.g. anterior and posterior crowns. Restorations made of LT blocks are characterized by a natural degree of brightness and chromaticity. This prevents the gray effect of embedded restorations. These blocks have a natural fluorescence that allows the restoration to match the rest of the teeth naturally in different lighting conditions. LT blocks are ideal for working with the cut back technique.

Dimensions I 12:

  • Width: 10.0mm
  • Length: 12.0mm
  • Height: 15.0mm

Packaging:

1 package/5pcs

Product Code: 7657
IPS Empress CAD for Cerec/InLab LT I 12/5pcs

82.77€ +vat105.16€

89.39€ incl tax

Product Code: 7658
Qty: 3
IPS Empress CAD for CEREC/inLab LT C14/5pcs
Ivoclar Technical

82.77€ +vat105.16€

89.39€ incl tax

IPS Empress CAD for CEREC/inLab LT C14/5pcs

Leucite-reinforced glass-ceramic blocks consisting of a glassy and a crystalline phase. They are used to perform an extremely aesthetic, completely anatomical reconstruction of a single tooth, using CAD/CAM technology in the Cerec system and in the laboratory system. Due to the difference in thermal expansion coefficients (CTE) between the glass phase and the crystal phase (leucite), compressive stresses in the glass phase arise during cooling after sintering. This mechanism increases strength, giving IPS Empress CAD a flexural strength of 160 MPa

Advantages:

  • Good fit accuracy;
  • homogeneous surface;
  • high strength;
  • Exact color match with the shade guide.

Technical properties:

  • CTE (100- 400°C) [10-6-K]CTE} - 16.6
  • CTE (100- 500°C) [10- 6K] - 17.5
  • Bending strength (biaxial) - 160
  • Crack resistance [MPa m0.5] - 1.3
  • Vickers hardness - 6200
  • Chemical solubility [ug/cm2] - 25

Indications:

  • Anterior and lateral crowns
  • Partial crowns
  • Veneers

IPS Empress CAD LT (Low Translucency) LT blocks are available in the 9 most popular AD scale shades and 4 shades for teeth after bleaching Bleach BL. Thanks to their high brightness, higher than in the case of HT blocks, they are ideal for making larger restorations (e.g. anterior and posterior crowns. Restorations made of LT blocks are characterized by a natural degree of brightness and chromaticity. This prevents the gray effect of embedded restorations. These blocks have a natural fluorescence that allows the restoration to match the rest of the teeth naturally in different lighting conditions. LT blocks are ideal for working with the cut back technique.

Dimensions C14:

  • Width: 12.0mm
  • Length: 14.0mm
  • Height: 18.0mm

Packaging:

  • 1 package/5pcs

Product Code: 7658
IPS Empress CAD for CEREC/inLab LT C14/5pcs

82.77€ +vat105.16€

89.39€ incl tax

Product Code: 7751
Qty: Out Of Stock
IPS Empress CAD for Cerec/InLab Multi I12 /5pcs
Ivoclar Technical

107.02€ +vat135.98€

115.59€ incl tax

IPS Empress CAD for Cerec/InLab Multi I12 /5pcs

Leucite-reinforced glass-ceramic blocks consisting of a glassy and a crystalline phase. They are used to perform an extremely aesthetic, completely anatomical reconstruction of a single tooth, using CAD/CAM technology in the Cerec system and in the laboratory system. Due to the difference in thermal expansion coefficients (CTE) between the glass phase and the crystal phase (leucite), compressive stresses in the glass phase arise during cooling after sintering. This mechanism increases strength, giving IPS Empress CAD a flexural strength of 160 MPa

Advantages:

  • Good fit accuracy;
  • homogeneous surface;
  • high strength;
  • Exact color match with the shade guide.

Technical properties:

  • CTE (100- 400°C) [10-6-K]CTE} - 16.6
  • CTE (100- 500°C) [10- 6K] - 17.5
  • Bending strength (biaxial) - 160
  • Crack resistance [MPa m0.5] - 1.3
  • Vickers hardness - 6200
  • Chemical solubility [ug/cm2] - 25

Indications:

  • Anterior and lateral crowns
  • Partial crowns
  • Veneers

IPS Empress CAD Multi:

The blocks are available in the 5 most popular colors of the AD scale and in 3 sizes. Thanks to the natural shade distribution from the dentine to the incisal materials, restorations made of Multi IPS Empress CAD blocks ensure maximum aesthetics and naturalness. The natural arrangement of opaque and transparent layers allows for different aesthetics. The IPS Empress CAD Multi block is characterized by a natural fluorescence pattern similar to the natural tooth, which allows the restoration to be perfectly matched to the natural teeth. Thanks to the innovative combination of natural color scheme, translucency and fluorescence, very aesthetic restorations are created in the simplest way.

Dimensions I 12:

  • Width: 10.0mm
  • Length: 12.0mm
  • Height: 15.0mm

Packaging:

1pack/5pcs

Product Code: 7751
IPS Empress CAD for Cerec/InLab Multi I12 /5pcs

107.02€ +vat135.98€

115.59€ incl tax

Product Code: 8379
Qty: 1
IPS Empress CAD for Cerec/InLab Multi C14/5pcs
Ivoclar Technical

107.02€ +vat135.98€

115.59€ incl tax

IPS Empress CAD for Cerec/InLab Multi C14/5pcs

Leucite-reinforced glass-ceramic blocks consisting of a glassy and a crystalline phase. They are used to perform an extremely aesthetic, completely anatomical reconstruction of a single tooth, using CAD/CAM technology in the Cerec system and in the laboratory system. Due to the difference in thermal expansion coefficients (CTE) between the glass phase and the crystal phase (leucite), compressive stresses in the glass phase arise during cooling after sintering. This mechanism increases strength, giving IPS Empress CAD a flexural strength of 160 MPa

Advantages:

  • Good fit accuracy;
  • homogeneous surface;
  • high strength;
  • Exact color match with the shade guide.

Technical properties:

  • CTE (100-400°C) [10-6-K]CTE} - 16.6
  • CTE (100-500°C) [10-6K] - 17.5
  • Bending strength (biaxial) - 160
  • Crack resistance [MPa m0.5] - 1.3
  • Vickers hardness - 6200
  • Chemical solubility [ug/cm2] - 25

Indications:

  • anterior and posterior crowns
  • partial crowns
  • school

IPS Empress CAD Multi:

  • The blocks are available in the 5 most popular colors of the AD scale and in 3 sizes. Thanks to the natural shade distribution from the dentine to the incisal materials, restorations made of Multi IPS Empress CAD blocks ensure maximum aesthetics and naturalness. The natural arrangement of opaque and transparent layers allows for different aesthetics. The IPS Empress CAD Multi block is characterized by a natural fluorescence pattern similar to the natural tooth, which allows the restoration to be perfectly matched to the natural teeth. Thanks to the innovative combination of natural color scheme, translucency and fluorescence, very aesthetic restorations are created in the simplest way.

Dimensions C14:

  • Width: 12.0mm
  • Length: 14.0mm
  • Height: 18.0mm

Packaging:

  • 1pack/5pcs

Product Code: 8379
IPS Empress CAD for Cerec/InLab Multi C14/5pcs

107.02€ +vat135.98€

115.59€ incl tax

Showing 1 to 4 of 4 (1 Pages)