Duracrol Polymer 500g
Duracrol - self-polymerizing acrylic resin.
Characteristics:
- For making individual impression trays and phantom models.
- Convenient and easy to use.
- Yellow color.
Packaging:
- 500g.
Tessex AL shellac - shellac tiles 12 pcs 4+1 free (put 5 pcs in the cart and pay for 4 pcs)
Shellac tiles with an admixture of aluminum. Individual impression trays for impressions of edentulous jaws.
Characteristics:
- Optimum durability.
- Easy adaptation and processing.
- Shape stability after cooling.
- They do not stick to plaster.
Packaging:
- 12 pcs. tiles in the upper or lower package.
Villacryl IT for individual spoons 750g/200 ml
Self-polymerizing acrylic material intended for making individual impression trays. The material is available in two colors: green and pink. Pink acrylic allows you to make occlusal patterns and try on the teeth positioned in wax directly on the plate (wax rolls).
Advantages:
- easy to prepare and process
- suitable for work immediately after mixing
- does not stick to hands
- short spoon preparation time
- does not contain heavy metals
Color:
- green
- pink
Technical data:
- Dough shelf life - 5'
- Time to prepare the dough for use - 30-60''
- Self-polymerization time - 9'
- Mixing proportions - 21 g of powder/6 ml (5.6 g) of liquid
- Breaking strength - >37 MPa
Packaging:
- 750g/200ml
Villacryl IT proszek
Villacryl IT jest samopolimeryzującym tworzywem przeznaczonym do wykonywania indywidualnych łyżek wyciskowych.
Cechy :
- Łatwy w przygotowaniu i obróbce.
- Nadaje się do pracy natychmiast po zmieszaniu.
- Nie przykleja się do rąk.
- Krótki czas przygotowania łyżki.
- Nie zawiera metali ciężkich.
Opakowanie:
750 g.
EcoTray LC Premium light-curing material for individual trays Promotion
EcoTray LC Premium, a new high-quality light-cured material for individual trays.
Polymerization:
- Wavelength of polymerization light 300-400nm
- Polymerization minimum UV/halogen 3-5 minutes
- It is recommended to polymerize in devices polymerizing with UV light with a power of at least 36 watts
Characteristics:
- High dimensional stability.
- Break-resistant.
- Thickness approx. 2 to 2.4 mm.
- Very low shrinkage (2.08 vol%)
- Low water absorption (<0.1%)
- Pink color.
Application:
- Individual impression trays.
- Base plates for wax-up.
- Functional individual trays for impressions under crowns and bridges.
- Bite plates for bite registration.
Safety tip:
- Light-curing tiles contain methacrylates, which are a potential contact allergen. To avoid direct contact with the skin, the plates are equipped with an inhibition layer of Vaseline. After hardening in the apparatus, it is visible on the tiles as a layer of lubricant. This layer can be wiped off with an alcohol-soaked cloth after light curing. This is an additional step to protect your skin.
Packaging:
- 50 pcs.
Elite LC Tray for spoons 50 pcs
Elite LC Tray is a line of light-cured resins for individual impression trays. Also recommended for making base plates for positioning teeth and bite plates in removable dentures.
Characteristic:
Hardened with halogen light or UV light (3 – 5 minutes).
Stable in daylight or artificial light for approximately 20:00 min.
Available in three colors: blue, white and pink.
Minimal polymerization shrinkage.
Advantages:
Easy to model, not sticky.
The speed of work allows you to save time compared to traditional self-curing resins.
Universal.
Product data:
- Curing time 03:00 - 05:00 min
- Thickness 2.5 mm
- Hardness (Shore D) 80
- Curing UV light (350 - 400 nm), Halogen light (420 - 480 nm)
Packaging:
- 50pcs/pack
Shellac top plates
Top base shellac tiles.
Characteristics:
- Stable shape.
- Pink color.
- Thickness approximately 1.3 mm.
Application:
- Making individual impression trays, bite rollers, and impressions to determine the bite.
Packaging:
- 1 pc top.
Shellac bottom plates
Bottom base shellac plates.
Characteristics:
- Stable shape.
- Pink color.
- Thickness approximately 1.3 mm.
Application:
- Making individual impression trays, bite rollers, and impressions to determine the bite.
Packaging:
- 1 pc bottom.
Morsa LC Tray light-curing material for individual trays 50pcs. Special offer
For the production of individual and functional impression trays. The material is also indicated for the production of base plates for wax models and bite templates.
The material can be cured with halogen and UV. When properly cured, the material is dimensionally stable.
Curing time:
Work in daylight 20 minutes
Polymerization in an UV or halogen curing lamp top of the spoon on the model 3-5 minutes, bottom of the spoon off the model 3-5 minutes.
Use alcohol to remove the smear layer.
Precautions:
- The material contains methacrylates. Do not use in patients allergic to methacrylates or other substances contained in the product.
- Always use an extractor when trimming a spoon!
Packaging:
- 1pack/50pcs
Shellac bottom spoons 100 pcs
Bottom base shellac plates.
Characteristics:
- Stable shape.
- Pink color.
- Thickness about 1.3 mm.
Application:
- Making individual impression trays, bite rollers, impressions to determine the bite.
Packaging:
- 100 pcs down.
Shellac spoons upper 100 pcs.
Top base shellac plates.
Characteristics:
- Stable shape.
- Pink color.
- Thickness about 1.3 mm.
Application:
- Making individual impression trays, bite rollers, impressions to determine the bite.
Packaging:
- 100 pcs up.