Green melting wax.

Application:

• Making wax caps when modeling crowns and bridges using the soaking technique.
• Processing temperature 70-75 °C.

Packaging:

• 1pc/150g

Medium-hard, inorganic modeling wax for conventional crown and bridge techniques. Optimized for modeling with an electric wax knife.

Renfert catalog number 4950200

Characteristics:

• Opaque gray color.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

• 1pc/75g

GEO cervical wax, burgundy transparent.

Renfert catalog number 4861000

Characteristics:

• Wax for shaping the edges of crowns.
• Very little shrinkage, stable, can be applied precisely and thinly to the edge of the fitting.
• It has good surface treatment properties.

Packaging:

• 1pc/75g.

GEO-Dip yellow wax for the soaking technique.

Renfer catalog number 4823000

Characteristics:

• Wax for use in electric heaters.
• Produced in the form of practical granules.
• Thanks to its excellent quality and flexibility, it enables precise production of wax caps.

Packaging:

• 1pc/200g.

Crown Wax.

Characteristics:

• High-quality modeling wax for the crown and bridge technique.
• Perfect scraping properties.
• Fast solidification after application.
• It is easy to shape.
• Hard.
• Blue color.
• The solidification point of hard crown wax is approx. 61 °C.

Packaging:

• 70g.

SU UNDERLAY WAX cervical wax, orange.

Characteristics:

• Perfect for shaping the cervical edges of crowns and partial crowns.
• Soft casting wax with almost no shrinkage.
• Freezing temperature 66 °C.

Packaging:

• 1pc/45g

Adhesive wax.

• Good bonding effect on all materials.
• Ideal for attaching retention or carrier elements, repair and soldering work.
• Melting point 71 °C.
• Red colour.

Packaging:

• 1 piece

Cervical wax, eggplant color.

Characteristics:

• Flexible, stress-free, soft and non-shrink special wax for modeling the cervical edges of crowns, precision parts and inlays.
• The cervical wax burns off without leaving any residue, making it also suitable for the ceramic pressing technique.
• It has a very low elastic limit, so any deformation only has a plastic effect. This allows the safe modeling of thin plates up to the preparation margin.
• Freezing point approx. 62°C.

Packaging:

• 70g

Geo - Dip orange wax for the soaking technique. Ref. Renfert 4823200

Features:

• Low copy shrinkage.
• Used in electric heaters.
• Produced in the form of practical granules.
• Optimum viscosity at 89-91 ° C.
• Repeatable precisely fitting wax copies with an even layer thickness. This thickness depends on the temperature.
• High stability and flexibility.
• It does not contain acrylic additives.

Package:

1 pc / 200g

Wax in blocks for sandwiches

Performing wax:

• Caps for crowns, using the soaking technique.
• Yellow super soft.

Features:

• exact match
• ready-to-dip wax temperature 85 - 90 degrees ° C.
• within 1 second of immersion, we will get a 0.4 mm thick cap
• solidification point of wax 74 degrees ° C ..

Package:

200 g

Milling wax green. This high-quality medium-hard wax is used for modeling in the technique of making crowns and bridges.

Features:

• This wax can be easily milled.
• It does not smudge and keeps its shape very well.
• It is the perfect wax for any combination work.

Package:

70g.

GEO Avantgarde Universal opaque wax - mint. Wax intended for use with an electric wax cutter. Ref. number Renfert 4950300

Characteristics:

• For crown modeling.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

1pc/75g

GEO Classic transparent wax - mint. Modeling wax with Bunsen burners with very good tolerance to temperature fluctuations. Ref: Renfert 4971300

Features:

• Wax intended for pressed ceramics.
• It contains a small amount of pigment.
• Burns 100% residue-free.
• Low shrinkage due to the microcrystalline structure.

Package:

1 pc / 75 g.

Geo Classic Mint Wax - Opaque 75g Ref. Renfer 4970300

For modeling with Bunsen burners with very good tolerance to temperature fluctuations. It gives good results in modeling both crowns and bridges of various widths. All wax components burn completely.

Package:

75 g.

GEO wax - DIP green for the soaking technique. Renfert reference number 4823300

Features:

• Low copy shrinkage.
• For use in electronically stabilized melting vessels.
• The practical form of the granules makes it easier to fill the melting vessel.
• Optimum viscosity at 89-91 ° C.
• Repeatable precisely fitting wax copies with an even layer thickness.
• This thickness depends on the temperature.
• High stability and flexibility.
• It does not contain acrylic additives.

Package:

1 pc / 200g

Dental occlusive wax, ideal for a rational aesthetic modeling of chewing surfaces.

Features:

• It can be applied very well.
• The contours are clearly distinguished already in the recorded state.
• Occlusive waxes do not stain and do not stick.
• They burn without residue.

Package:

70g.

Medium-hard corona wax - dark blue.

Features:

• High-quality modeling wax for the technique of making crowns and bridges.
• Perfect scraping properties.
• Rapid solidification after application.
• It can be shaped well.

Package:

70g

GEO Avantgarde opaque wax - beige. Wax intended for use with an electric wax cutter. Reference number Renfert 4950100

Characteristics:

• For crown modeling.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

1pc/75g.

SU-MODELING WAX wax - blue modeling wax

Advantages; - Particularly suitable for the design of chewing surfaces and modeling the walls of crowns, as well as for the construction of spans for veneers made of plastics and ceramics. It is characterized by a high surface density. The opaque and intense color of the wax enables easy contour recognition during modeling. - Melting point 64 ° C.

Package:

45g.

GEO adhesive wax, transparent pink. Reference number Renfert 4881000

Special wax for attaching prosthetic elements, preparing repairs and soldering.

Advantages; - Excellent adhesion to all dental materials. - Accurate preparation for soldering and repairing dentures - Perfect for attaching and aligning casting channels and finished wax elements.

Packaging:

• 1pc/75g

GEO foundation and cervical wax - transparent red. Renfert reference number 4891000

Soft, slightly elastic and perfectly sealing cervical and base wax, used for precise modeling of crown edges. This wax is also suitable for lining small undercuts and recesses.

Advantages; - Definitely softer and more flexible than the hard and stable GEO Claassic cervical wax.

Packaging:

• 1pc/75g.

Occlusive wax - gray, ideal for rational and aesthetic modeling of chewing surfaces.

Features:

• It can be applied very well.
• The contours are clearly distinguished even when heated.
• Occlusive waxes do not stain and do not stick.
• They burn without residue.

Package:

70g.

Elaflex Super flexible wax for crown caps

Benefits:

• Excellent adhesion precision and high flexibility both in the production of crown inlays and crown caps.

• Elaflex is so flexible that the seal does not change when the cap is removed and replaced on the stump.

• The wax is self-insulating on polished primary telescopic crowns.

Package:

• 130g

GEO opaque milling wax - blue. Renfert reference number 4851000

Characteristics:

• Adapted to mechanical processing with cutting and milling tools.
• Suitable for modeling the chewing surface.
• It does not stick when working at speeds between 2,500 and 5,000 rpm.

Packaging:

• 1pc/75g.

GEO Classic opaque wax - gray. Wax for modeling with bunsen burners with very good tolerance to temperature fluctuations. Renfert reference number 4970200

Characteristics:

• Visible contours thanks to opacity.
• It shapes very well thanks to its plastic properties.
• It cuts very well.

Packaging:

• 1pc/75g.

Organic, transparent modeling wax, suitable for use with a flame torch and electric wax cutter. High precision and accuracy thanks to low shrinkage. No residue after firing.

Renfert catalog number 4750100

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Green color.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g.

Organic, transparent modeling wax suitable for use with a flame torch and electric wax cutter. High precision and accuracy thanks to low shrinkage. No residue after firing.

Renfert catalog number 4750200

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Blue color.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g

Organic, transparent modeling wax, suitable for use with a flame torch and electric wax cutter. High precision and accuracy thanks to low shrinkage. No residue after firing.

Renfert catalog number 4750300

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Red colour.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g

Inorganic, opaque modeling wax, suitable for use with a flame torch and electric wax knife. High precision and accuracy thanks to low shrinkage.

Renfert catalog number 4750400

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Beige colour.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g

Inorganic, opaque modeling wax, suitable for use with a flame torch and electric wax knife. High precision and accuracy thanks to low shrinkage.​ Renfert catalog number 4750500

Technical data:

• Recommended temperature setting is 115–135 °C
• Melting range 66–76 °C
• Grey colour.
• Hardness - medium hard.

Advantages:

• Very easy modeling and sculpting achieved by coordinated material properties.
• Low wax shrinkage ensures high precision and accuracy of fit.
• Smooth modeling of objects thanks to a small melting temperature range.

Packaging:

• 80g.

GEO Snow - white waxes are white, medium-hard waxes for modeling functional wax-ups in an articulator on various frameworks. It burns without residue and is an inorganic wax.

Renfert reference number 4990101

Advantages:

• Quick and precise white wax up on situational or master models, necessary for functional work planning.
• A very narrow melting temperature range and low shrinkage allow for quick and precise modeling.
• Very good modeling and sculpting properties achieved by coordinated material properties.

Packaging:

• 75g

Gingival waxes in pink and red, based on the philosophy of August Bruguera, to imitate natural gingiva in the anterior and posterior sections, especially for implant-supported superstructures

Catalog number .Renfert 6340801

Advantages:

• For shaping the gums in the front and side areas.
• For installation of implant structures.
• They burn without residue.
• They create a perfect combination with other GEO Expert Wax modeling waxes.
• Possibility of obtaining realistic shades.
• For best results, use an electric wax cutter.

Packaging:

• GEO Expert wax - Gingiva red - 40g, 1 pc.
• GEO Expert wax - Gingiva pink - 40g, 1 pc.
• Instructions according to August Bruguera's method in English.

Wax spans set. Wax blocks for porcelain structures.

Package:

180 pcs.

GEO Snow - white waxes are white, medium-hard waxes for modeling functional wax-ups in an articulator on various frameworks. It burns without residue and is an organic wax.

Renfert reference number 4990201

Advantages:

• Quick and precise white wax up on situational or master models, necessary for functional work planning.
• A very narrow melting temperature range and low shrinkage allow for quick and precise modeling.
• Very good modeling and sculpting properties achieved by coordinated material properties.

Packaging:

• 75g

Wax in blocks for making caps for crowns, using the soaking technique. Green soft.

Features:

• exact match
• ready-to-dip wax temp. 85 -90 ° C.
• within 1 second of immersion, we will get a 0.4 mm thick cap
• solidification point of wax 74 ° C.

Package:

200g.

GEO Classic Natural dentine opaque wax.

Wax for aesthetic planning of prosthetic restorations - wax-ups.

Renfert number 4990300

Characteristics:

• The translucency and color of A2 dentine give the modeled work a very realistic look.
• They burn without residue and are the optimal choice for all-ceramic and pressed porcelain work.

Advantages:

• Patients can get a true picture of their subsequent prosthetic restorations.

Packaging:

• 75 g

GEO Classic transparent blue wax. The wax is suitable for modeling with bunsen burners thanks to its very good tolerance to temperature fluctuations.

Renfert reference number 4971200

Features:

• It shapes very well thanks to its plastic properties.
• It cuts very well.
• Thanks to the hard, inelastic wax structure, it is ideal for modeling chewing surfaces.

Package:

1 pcs / 75g.

GEO Classic meringue opaque wax.

The wax is suitable for modeling with Bunsen burners thanks to its very good tolerance to temperature fluctuations.

Renfert reference number 4970100

Characteristics:

• Visible contours thanks to opacity.
• It shapes very well thanks to its plastic properties.
• It cuts very well.
• Thanks to the hard, inelastic structure of the wax, it is ideal for modeling chewing surfaces.

Packaging:

1pc/75g.

Modeling wax.

Features:

• green color
• medium-hard

Package:

45g

CAD / CAM modeling wax.

Advantages:

• Non-reflective wax suitable for all laser scanning systems.
• Pleasant pastel color.
• It can be milled.
• Very opaque.
• Low shrinkage.
• For modeling and blocking.
• melting point 51 ° C.

Package:

45 g.

Modeling wax for chewing surfaces.

Features:

• Setting temperature 61 degrees ° C.
• Color gray, hard.

Package:

45 g

Modeling wax, gray, medium hard.

Benefits:

• Very good fluidity
• Colored organically
• For use on inlays and crowns.
• Translucent in the liquid phase, i.e. the clotting phase is clearly perceptible during modeling.

Package:

• 45 g

Milling wax, very hard, blue color.

Package:

• 45g

Hard, transparent modeling wax for incisal areas based on the philosophy of August Bruguera. No residue after firing.

Renfert catalog number 6340200

Packaging:

• 1pc/40g

Mop wax blocks specially developed for press ceramics. Orange color.

Advantages:

• shape memory wax.
• bio - organically colored
• solidification point 64 degrees ° C.

Package:

200 g

Modeling wax in the CAD / CAM technique.

Advantages:

• Non-reflective wax suitable for all laser scanning systems.
• Pleasant pastel color.
• It can be milled.
• Very opaque.
• Low shrinkage
• For modeling and blocking.
• melting point 51 ° C.

Package:

45 g.

Modeling wax in the CAD / CAM technique.

Advantages:

• Non-reflective wax suitable for all laser scanning systems.
• Pleasant pastel color.
• It can be milled.
• Very opaque.
• Low shrinkage
• For modeling and blocking.
• melting point 51 ° C.

Package:

45 g.

Modeling wax for crowns and bridges, ideal for pressed porcelain. Light blue color.

Advantages :

• solidification point 64 degrees ° C.
• colored organically
• very clearly visible details of the modeling room.

Package:

45 g

Undercoating and cervical wax from the new CERAMO line, ideal for pressed ceramics. Orange color.

Advantages:

• low shrinkage
• flexible
• shape stability
• bio organically colored.

Package:

45 g

Modeling wax in the CAD / CAM technique.

Advantages:

• Non-reflective wax suitable for all laser scanning systems.
• Pleasant pastel color.
• It can be milled.
• Very opaque.
• Low shrinkage
• For modeling and blocking.
• melting point 51 ° C.

Package:

45 g.