BegoForm protective mass 15x90g
BegoForm refractory post material for inlays, veneers and onlays.
Posts with high edge strength, smooth and precise;
The properties and extensibility of BegoForm® have been adapted to ceramics from well-known manufacturers, enabling excellent accuracy of fit to individually layered inlays, onlays and veneers;
The constant high firing stability of BegoForm®, even after several cycles, enables ceramic corrections without loss of precision;
Reliable expansion control for perfect fitting results thanks to the special BegoForm® mixing fluid.
Packaging:
- Set of 15 bags x 90g
Ips PressVEST Premium Powder 100g
Ips PressVEST Premium Powder.
Product description:
- IPS PressVest Premium is a universal, phosphate-bonded investment material (Type 1, Class 1 and 2) that can be used with Ivoclar press ceramic materials.
- It can be used in both the speed heating procedure and the conventional procedure.
Speed heating procedure:
- the ring is placed in an oven heated to its final temperature and then, after a specified time, transferred to the pressing oven.
Conventional heating procedure:
- the ring is placed in an unheated oven (room temperature) and heated to the final temperature as recommended. After a specified time, the ring is transferred to the pressing oven.
Indications:
IPS Press VEST Premium can be used with the following Ivoclar press ceramic materials
IPS e.max Press;
- IPS e.max ZirPress;
- IPS InLine PoM (Press-on Metal);
Storage:
- store at 12-28°C;
- store the powder in a dry place;
- do not store the liquid at a temperature lower than +5 °C (due to its sensitivity to low temperatures!), if the liquid freezes, it becomes unsuitable for use due to crystallization.
Temperature at which the material can be used:
- ambient temperature 18 °C - max. 23 °C;
- Temperatures significantly outside this range may significantly affect the setting process;
- lower ambient temperature slows down the chemical process;
- higher ambient temperature accelerates the chemical process (from temp. 23 - 28 °C the fluid with water can be cooled to 12 °C.
Mixing proportions:
- By diluting the liquid, it is possible to control the expansion of the investment material, which affects the fit of the overpressed restoration;
- liquid concentration is expressed in %;
The important proportions of the mixed liquid (investment liquid + distilled water) depend on the amount of powder and must be strictly adhered to.
100 g powder: 26 ml liquid (investment liquid + distilled water);
- 200 g powder: 52 ml liquid (investment liquid + distilled water);
- 300 g powder: 78 ml liquid (investment liquid + distilled water);
The following fluid concentration information is a guide only and may be adjusted depending on job size and mixing conditions.
Do not dilute the liquid below 50%!
Packaging:
-100g
Ips PressVEST Premium Liquid 500 ml The liquid is sensitive to low temperatures - winter shipping at the risk of the customer
IPS PressVest Premium investment material mixing liquid.
IPS PressVEST Premium is a universal, phosphated casting material intended for use in combination with Ivoclar pressable ceramics.
Packaging:
- 500ml
IPS PressVEST Premium Liquid 1l - The liquid is sensitive to low temperatures - shipping in winter is at the risk of the customer.
IPS PressVest Premium investment material mixing liquid.
IPS PressVEST Premium is a universal, phosphated casting material intended for use in combination with Ivoclar pressable ceramics.
Packaging:
- 1l
Siladent Liquid for investment material type 100 1L
TYPE 100 - liquid for the investment materials from Siladent.
Package:
- 1000 ml
Silavest Press 100g
Phosphate-bound, graphite-free, precision investment for all ceramic systems and high-speed pressed ceramics. Silavest Press can be used with ceramics pressed against metal and zircons.
Benefits:
- perfect match
- very smooth surface
- a fine-grained mass with a creamy consistency
- for all press ceramics systems
- easy released
- should be used with SILADENT type 100 expansion fluid.
Package:
- 100g
GC LiSi PRESS VEST liquid 900 ml - Liquid sensitive to low temperature - shipping in winter at the customer's risk.
GC LiSi PressVest - liquid. Low temperature sensitive liquid - shipping in winter at the customer's risk.
Package:
- 900 ml.
GC LiSi PRESS VEST POWDER 60x100g
Phosphate investment material used in the press ceramics technique. For the quick heating process.
Package:
60x100 g
IPS PressVEST Premium Powder 5kg (50x100g)
IPS PressVEST Premium Powder
Product description:
- IPS PressVest Premium is a universal, phosphate-bonded investment material (Type 1, Class 1 and 2) that can be used with Ivoclar press ceramic materials;
- It can be used in both the speed heating procedure and the conventional procedure.
Speed heating procedure:
- the ring is placed in an oven heated to its final temperature and then, after a specified time, transferred to the pressing oven;
Conventional heating procedure:
- the ring is placed in an unheated oven (room temperature) and heated to the final temperature as recommended. After a specified time, the ring is transferred to the pressing oven.
Indications:
**IPS Press VEST Premium can be used with the following Ivoclar press ceramics:
- IPS e.max Press;
- IPS e.max ZirPress;
- IPS InLine PoM (Press-on Metal).
Storage:
- store at 12-28°C;
- store the powder in a dry place;
- do not store the liquid at a temperature lower than +5 °C (due to its sensitivity to low temperatures!), if the liquid freezes, it becomes unsuitable for use due to crystallization.
Temperature at which the material can be used:
- ambient temperature 18 °C - max. 23 °C;
- Temperatures significantly outside this range may significantly affect the setting process;
- lower ambient temperature slows down the chemical process;
- higher ambient temperature accelerates the chemical process (from temp. 23 - 28 °C the fluid with water can be cooled to 12 °C.
Mixing proportions:
- By diluting the liquid, it is possible to control the expansion of the investment material, which affects the fit of the overpressed restoration.
- Liquid concentration is expressed in %.
- The important proportions of the mixed liquid (investment liquid + distilled water) depend on the amount of powder and must be strictly adhered to.
- 100 g powder: 26 ml liquid (investment liquid + distilled water);
- 200 g powder: 52 ml liquid (investment liquid + distilled water);
- 300 g powder: 78 ml liquid (investment liquid + distilled water);
The following fluid concentration information is a guide only and may be adjusted depending on job size and mixing conditions.
Do not dilute the liquid below 50%!
Packaging:
- 50 x 100g