NT1313 KXP4 Laboratory Oven
Stainless steel housing,
Heating unit with built-in heaters, extremely reliable,
The interior of the chamber and heaters resistant to mechanical damage,
Large chamber in relation to the external dimensions,
Two-position door, pressed with a spring, also protecting against self-closing during operation,
Door switch disconnecting power supply to the heaters,
Sheathed and closed thermocouple,
Protection against overheating in the event of a temperature sensor failure,
Thermal insulation with fibrous refractory materials, Fireplace enabling connection of an exhaust hood, Optionally, the furnace can be equipped with a catalyst, Low weight.
Heating curve:
Furnace chamber width 160mm height 100mm depth 180mm External dimensions width 310mm height 390mm depth 330mm
Weight 16.5 kg Temperature max 1100 ° C Power 230V 50Hz Rated power 1400W Fiber insulation materials Housing stainless steel Temperature sensor NiCr-NiAl sheathed thermocouple Relative delay coefficient c = 0.001
Package:
1 piece.
SIRIO InFire S ring heater
Electronically controlled ring heating furnace.
Two programs:
- classic for traditional heating
- "fast" - putting the ring into a hot stove
In each program, we can control 3 parameters:
- temperature
- temperature rise
- sometimes keeping the temperature
Delayed start function up to 100 hours. The furnace can hold 9 rings in the traditional "3" size or 2 rings in the "9" size
Parameters:
- voltage 230V
- power 1500W
- temperature max. 1100C
- dimensions 32x40x47 cm
- weight 28 kg
Laboratory furnace Lift 3.0 KXP4 (Version P, S, R)
Piec wyróżnia się szeregiem innowacyjnych rozwiązań konstrukcyjnych, które powodują, że praca staje się przyjemna a piec niezawodny. W piecu zastosowano wysokiej jakości ogniotrwałe materiały izolacyjne oraz niezawodny korundowy zespół grzejny z zainkludowanymi grzałkami.
The furnace is designed for laboratory work requiring precise temperature measurement, including annealing, incineration, melting, burning of pollutants, heating of casting molds in prosthetic laboratories, etc.
The LIFT 3.0 furnace has:
Heating chamber capacity: 3 dm3,
Stainless steel housing, double, ventilated, ensuring a low temperature of the external surface,
Heating unit with built-in heaters with extremely high reliability,
The interior of the chamber and heaters resistant to mechanical damage,
The door lifted up to protect the user against heat radiating from it and burns by touch,
Door switch disconnecting the power supply to the heaters,
Sheathed, closed thermocouple with increased durability and low time constant,
Thermal insulation from fibrous refractory materials,
A fireplace that allows you to connect an extractor hood,
A thermoregulator located under the stove,
Large chamber in relation to the external dimensions,
Low weight of the stove,
Optionally, the furnace can be equipped with a catalyst. design that makes work more enjoyable and the stove is reliable. The furnace uses high-quality refractory insulation materials and a reliable corundum heating unit with embedded heaters. The furnace is designed for laboratory work requiring precise temperature measurement, including annealing, incineration, melting, burning of pollutants, heating of casting molds in prosthetic laboratories, etc.
The LIFT 3.0 furnace has:
Heating chamber capacity: 3 dm3,
Stainless steel housing, double, ventilated, ensuring a low temperature of the external surface,
Heating unit with built-in heaters with extremely high reliability,
The interior of the chamber and heaters resistant to mechanical damage,
The door lifted up to protect the user against heat radiating from it and burns by touch,
Door switch disconnecting the power supply to the heaters,
Sheathed, closed thermocouple with increased durability and low time constant,
Thermal insulation from fibrous refractory materials,
A fireplace that allows you to connect an extractor hood,
A thermoregulator located under the stove,
Large chamber in relation to the external dimensions,
Low weight of the stove,
Optionally, the furnace can be equipped with a catalyst.
KXP4 thermoregulator:
- The KXP4 is a programmable microprocessor controller with an illuminated alphanumeric display, sound signaling and a Bluetooth modem that enables registration and visualization of the process on a computer in real time.
KXP4 is available in three versions: - [P] basic - 1 1-stage program - [S] standard 3 programs max. 3 stages, stages 2 and 3 can be programmed for cooling rate instead of heating, adjustable delay for turning on the oven operation up to 9 days. - [R] extended 9 programs max. 5 steps, steps 2, 3, 4 and 5 can be programmed for cooling rate instead of heating, adjustable delay for turning on the oven operation up to 9 days.
Each version has:
- stages with programmable heating rate and stop time,
- special C program (e.g. for Speed masses),
- indication of thermocouple wear,
- SPMW software that automatically reduces overshoots,
- the possibility of changing the program during its implementation,
- stove operating hours counter,
- optional catalyst control and programming of its switch-off threshold,
- optional wireless communication with a computer for parameter registration and process visualization.
Parameters common to all KXP4 versions:
- Temperature setting range: 40 ° C - 1100 ° C
- Stop times: from 0 minutes to 9 hours 59 minutes
- Program. heating rate: from 1 to 20 [° C / min]
- Temperature indication error (<700 ° C): +/- 2 ° C
- Temperature indication error (> 700 ° C): +/- 3 ° C
- Timing accuracy: 0.4%
- No-load power consumption: 5VA
Packaging:
- 1 piece
Laboratory furnace NT 1313 KXP 4 with catalytic converter (P, S, R version)
NT 1313 is a muffle and plate furnace for laboratory and industrial purposes. The furnace uses high-quality insulating refractory materials and a reliable corundum heating unit with embedded heaters. The furnace is designed for works requiring precise temperature measurement, including annealing, incineration, melting, burning of pollutants, heating of foundry molds in prosthetic laboratories, heat treatment of metals, firing of fine ceramics and stained glass.
Advantages:
heating chamber capacity 4.5 dm3,
stainless steel housing,
a heating unit with integrated heaters, with three heating plates, with extremely high reliability,
the interior of the chamber and heaters resistant to mechanical damage,
large chamber in relation to the external dimensions,
two-position door pressed with a spring protecting against self-closing during operation,
door switch disconnecting the power supply to the heaters,
sheathed, closed thermocouple with increased durability,
thermal insulation from fibrous refractory materials,
a fireplace that allows you to connect an extractor hood,
a thermoregulator located on the side of the furnace facilitates its operation and is not exposed to heat radiating from the door and the removable load,
low weight of the stove,
Technical data:
heating chamber capacity 4.5 dm3,
stainless steel housing,
a heating unit with integrated heaters, with three heating plates, with extremely high reliability,
the interior of the chamber and heaters resistant to mechanical damage,
large chamber in relation to the external dimensions,
two-position door pressed with a spring protecting against self-closing during operation,
door switch disconnecting the power supply to the heaters,
sheathed, closed thermocouple with increased durability,
thermal insulation from fibrous refractory materials,
a fireplace that allows you to connect an extractor hood,
a thermoregulator located on the side of the furnace facilitates its operation and is not exposed to heat radiating from the door and the removable load,
low weight of the stove,
furnace equipped with a catalyst.
KXP4 thermoregulator:
The KXP4 is a programmable microprocessor controller with an illuminated alphanumeric display, sound signaling and a Bluetooth modem that enables registration and visualization of the process on a computer.
The KXP4 is available in three versions:
[P] basic - 1 1-stage program
- [S] standard 3 programs max. 3 stages, stages 2 and 3 can be programmed for cooling rate instead of heating, adjustable delay for turning on the oven operation up to 9 days.
- [R] extended 9 programs max. 5 steps, steps 2, 3, 4 and 5 can be programmed for cooling rate instead of heating, adjustable delay for turning on the oven operation up to 9 days.
Each version has:
- stages with programmable heating rate and stop time,
- special C program (e.g. for Speed masses),
- indication of thermocouple wear,
- SPMW software that automatically reduces overshoots,
- the possibility of changing the program during its implementation,
- stove operating hours counter,
- optional catalytic converter control and programming of its switch-off threshold,
- optional wireless communication with a computer for parameter registration and process visualization.
Parameters common to all KXP4 versions:
- Temperature setting range: 40 ° C - 1100 ° C
- Stop times: from 0 minutes to 9 hours 59 minutes
- Program. heating rate: from 1 to 20 [° C / min]
- Temperature indication error (<700 ° C): +/- 2 ° C
- Temperature indication error (> 700 ° C): +/- 3 ° C
- Timing accuracy: 0.4%
- No-load power consumption: 5 VA
Packaging:
- 1 piece
Laboratory furnace for rings PROD-DENT P2.4
Basic compact ring heating furnace.
Technical data:
- external dimensions (height width) 450x340x380
- dimensions (height, depth) com. 110x115x175
- power 1400W
- temperature max. 1150 ° C
- temperature rise 15 ° C / min
- weight 18kg
- accuracy +/- 2 ° C
Package; 1 piece
Catalyst for the furnace for heating Magma rings
Catalyst - by catalytic oxidation of gases, it reduces smoke and odor.
Renfert reference number 23000001
Advantages:
- intelligent control by the Magma furnace
- chemical conversion of organic substances to carbon dioxide and water vapor
- increasing the life of the catalyst by the automatic switch-off function at a temperature of 650 ° C
- the catalytic converter is always on when using the Speed program.
Technical data:
- permissible voltage in the 230v network
- power consumption 580 W
- weight 4.8 kg
- dimensions (width x height x depth) 190x370x170mm
Package:
1 piece
Magma rings annealing furnace
Heating up the furnace to 900 ° C in 60 minutes. 99 programs can be stored + 1 program for quick investment materials. Programmable temperature increase from 0-9 ° C / min. (0 = max.) Extra fast program
Technical data:
- dimensions 43.0 x 45.0 x 50.0 cm;
- heating chamber 160 x 180 x 120 mm;
- 230 V / 50 Hz;
- 1900 Watts;
- 1100 ° C max
Packaging:
1 piece
PROGRAMIX 50 ring heating furnace PROMOTION
PROGRAMIX 50:
- 30 programs;
- power supply: 220 V / 50 Hz;
- power 2000W;
- 120 (H) x 170 (W) x 210 (D) mm;
- weight 34 kg
Package:
1 piece.
The furnace for heating up the MAGMA rings with an outlet for a catalyst
Magma - ring annealing furnace.
Advantages:
- Even distribution of heat throughout the chamber by heating it from four sides.
- Fast heating up time of only 60 minutes. up to 900 ° C.
- 99 programmable places + 1 program for baking a quick mass.
Technical data:
- mains voltage 220-240 V
- power consumption 1900 W
- mains fuse at the 12 A input
- temperature range 0 ° C - 1100 ° C.
- programmable degree of temperature increase 0 ° C - 9 ° C / min.
- maximum temperature rise in 1 hour 900 ° C.
- number of programmable programs 99
- number of quick programs 1
- heating chamber volume 3.45l
- external dimensions with a handle and chimney 430x500x440 mm
- external dimensions with a handle and a catalyst 430x610x550 mm
- thermocouple type PtRh- Pt
- weight booster with catalyst 34.8 kg
- weight with the chimney 30 kg.
Package:
1 piece.
Laboratory furnace NT1313 KXP4 (P, S, R version)
NT 1313 is a muffle and plate furnace for laboratory and industrial purposes. The furnace uses high-quality insulating refractory materials and a reliable corundum heating unit with embedded heaters. The furnace is designed for works requiring precise temperature measurement, including annealing, incineration, melting, burning of pollutants, heating of foundry molds in prosthetic laboratories, heat treatment of metals, firing of fine ceramics and stained glass.
Advantages:
heating chamber capacity 4.5 dm3,
stainless steel housing,
heating unit with built-in heaters, with three heating plates, extremely reliable,
the interior of the chamber and heaters resistant to mechanical damage,
large chamber in relation to the external dimensions,
two-position door pressed with a spring protecting against self-closing during operation,
door switch disconnecting the power supply to the heaters,
sheathed, closed thermocouple with increased durability,
thermal insulation from fibrous refractory materials,
a fireplace that allows you to connect an extractor hood,
a thermoregulator located on the side of the furnace facilitates its operation and is not exposed to heat radiating from the door and the removable load,
low weight of the stove,
Technical data:
heating chamber capacity 4.5 dm3,
stainless steel housing,
heating unit with built-in heaters, with three heating plates, extremely reliable,
the interior of the chamber and heaters resistant to mechanical damage,
large chamber in relation to the external dimensions,
two-position door pressed with a spring protecting against self-closing during operation,
door switch disconnecting the power supply to the heaters,
sheathed, closed thermocouple with increased durability,
thermal insulation from fibrous refractory materials,
a fireplace that allows you to connect an extractor hood,
a thermoregulator located on the side of the furnace facilitates its operation and is not exposed to heat radiating from the door and the removable load,
low weight of the stove,
optionally, the furnace can be equipped with a catalytic converter.
KXP4 thermoregulator:
The KXP4 is a programmable microprocessor controller with an illuminated alphanumeric display, sound signaling and a Bluetooth modem that enables registration and visualization of the process on a computer.
The KXP4 is available in three versions:
[P] basic - 1 1-stage program
- [S] standard 3 programs max. 3 stages, stages 2 and 3 can be programmed for cooling rate instead of heating, adjustable delay for turning on the oven operation up to 9 days.
- [R] extended 9 programs max. 5 steps, steps 2, 3, 4 and 5 can be programmed for cooling rate instead of heating, adjustable delay for turning on the oven operation up to 9 days.
Each version has:
- stages with programmable heating rate and stop time,
- special C program (e.g. for Speed masses),
- indication of thermocouple wear,
- SPMW software that automatically reduces overshoots,
- the possibility of changing the program during its implementation,
- stove operating hours counter,
- optional catalyst control and programming of its switch-off threshold,
- optional wireless communication with a computer for parameter registration and process visualization.
Parameters common to all KXP4 versions:
- Temperature setting range: 40 ° C - 1100 ° C
- Stop times: from 0 minutes to 9 hours 59 minutes
- Program. heating rate: from 1 to 20 [° C / min]
- Temperature indication error (<700 ° C): +/- 2 ° C
- Temperature indication error (> 700 ° C): +/- 3 ° C
- Timing accuracy: 0.4%
- No-load power consumption: 5 VA
Package:
- 1 piece
Laboratory furnace Lift 3.0 MX
The furnace is distinguished by a number of innovative design solutions that make the work pleasant and the furnace reliable. The furnace uses high-quality refractory insulation materials and a reliable corundum heating unit with embedded heaters. The furnace is designed for laboratory work requiring precise temperature measurement, including annealing, incineration, melting, burning of pollutants, heating of casting molds in prosthetic laboratories, etc.
The LIFT 3.0 furnace has:
- Heating chamber capacity: 3 dm3,
- Stainless steel housing, double, ventilated, ensuring a low temperature of the external surface,
- Heating unit with built-in heaters with extremely high reliability,
- The interior of the chamber and heaters resistant to mechanical damage,
- The door lifted up to protect the user against heat radiating from it and burns by touch,
- Door switch disconnecting the power supply to the heaters,
- Sheathed, closed thermocouple with increased durability and low time constant,
- Thermal insulation from fibrous refractory materials,
- A fireplace that allows you to connect an extractor hood,
- A thermoregulator located under the stove,
- Large chamber in relation to the external dimensions,
- Low weight of the stove,
- Optionally, the furnace can be equipped with a catalyst.
MX thermoregulator:
- The MX is a programmable microprocessor controller with two 4-digit LED displays.
- simultaneously displays the preset / preset temperature and temperature in the furnace chamber,
- is programmed with a 4-button key,
- has a reading resolution of 1 ° C,
- signals the heating and wear of the thermocouple,
- performs PID control (factory-selected settings for the furnace).
Packaging:
- 1 piece