Compressed sponge eraser - medium-grained gray
Sponge eraser for working with thermoplastic materials, medium-grained.
The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.
The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.
Characteristics:
- recommended operating speed - min. 6000 - max. 20000 rpm.
- diameter - 26 mm.
Packaging:
- 1pc.
Compressed sponge eraser - soft black
Sponge eraser for working with thermoplastic materials, fine-grained.
The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.
The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.
Characteristics:
- recommended operating speed - min. 6000 - max. 20000 rpm.
- diameter - 26 mm.
Packaging:
- 1pc.
Compressed sponge eraser - ultra-delicate red
Sponge eraser for working with thermoplastic materials, very fine-grained.
The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.
The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.
Characteristics:
- recommended operating speed - min. 6000 - max. 20000 rpm.
- diameter - 26 mm.
Packaging:
- 1pc.
Sponge eraser - medium-grained gray
Sponge eraser for working with thermoplastic materials, medium-grained.
The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.
The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.
Characteristics:
- recommended operating speed - min. 6000 - max. 20000 rpm.
- diameter - 26 mm.
Packaging:
- 1pc.
Sponge eraser - soft black
Sponge eraser for working with thermoplastic materials, fine-grained.
The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.
The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.
Characteristics:
- recommended operating speed - min. 6000 - max. 20000 rpm;
- diameter - 26 mm.
Packaging:
- 1pc.
B-Form GRAMINOX granulate for molders 480g
Stainless steel granules for B-Form vacuum forming machines.
Characteristics:
- Adjusting the model's height: you can "sink" the model into the beads to the desired depth. This will ensure the foil adheres only to the line you define;
- the granulate prevents the formation of unwanted foil folds around the base of the model, which is common when forming without granulate;
- stabilizes the model: thanks to the large mass of the balls, the model does not move during the suction (vacuum) process;
- ball diameter approx. 1.2 mm – 1.5 mm.
Packaging:
- 1 pc.
Block Out Resin 1.2ml 1 pc.
Ultradent LC Block-Out Resin is used to create gel reservoirs in whitening trays and is useful for other laboratory work, such as model repairs.
Application of Ultradent LC Block-Out Resin with the Black Mini Tip is quick and effective.
Characteristics:
- light curing is necessary;
- The resin is not intended for use in the oral cavity.
Use:
- To form the gel reservoirs, apply approximately 0.5 mm of Ultradent LC Block-Out resin to the labial surfaces, remaining approximately 1.5 mm from the gum line, and light cure.
- do not go beyond the incisal edges or chewing surfaces.
Packaging:
- 1.2 ml syringe.
DFS Synthetic Brush for Polishing Plastic 10 Pieces
Flexible synthetic fiber brushes (FLEECETECH) impregnated with abrasive material for processing and smoothing soft materials, plastics and thermoformable splints.
Characteristics:
- diameter: 26mm;
- recommended speed: 5-10000 rpm.
- assembly: the brushes are factory-mounted on the holder and centered, which ensures stable operation without wobbling.
Available in 3 grades:
- yellow - coarse;
- green color - medium;
- purple color - fine.
Packaging:
- 10 pcs.
Lisko-S plastic polishing discs, 10 pieces
Plastic polishing discs.
The material from which they are made is characterized by high durability.
Perfect for processing hard and soft foils such as erkoflex or erkodur.
Features:
- Turquoise.
- Fine-grained.
- Disc diameter 28 mm.
- Thickness about 2 - 3 mm.
- To be mounted on a 2.35 mm thick pin.
- Speed range 5,000 - 10,000 rpm.
- It is recommended to wear safety glasses when working with Lisko discs.
Packaging:
- 10 pcs. Lisko S discs.
- 1 pc. pin 2.35mm.
- 4 pcs. support discs.
Erkodent wax for blocking undercuts
High-melting wax intended for blocking undercuts in the deep molding technique.
Very easy to model.
Transparent.
Packaging:
- 50g
Hard polishing disc for thermoformable materials
Scotch-Brite polishing disc for polishing thermoformable materials, acrylic and silicone.
Characteristics:
- hard;
- without holder;
- on the rectum.
Packaging:
- 1pc.
Medium polishing disc for thermoformable materials
Scotch-Brite polishing disc for polishing thermoformable materials, acrylic and silicone.
Characteristics:
- medium;
- without holder;
- on the rectum.
Packaging:
- 1pc.
Fillin silicone material for locking on model 60g
Reusable silicone material used for locking onto a model.
It works perfectly as a blocker when making whitening trays.
Packaging:
- 1pc/60g
Finishing liquid Drufosoft 250ml foil polishing liquid
Universal liquid for polishing splints made of soft thermoformable materials (whitening splints, sports protectors).
Advantages:
- easy to use;
- creates a smooth, shiny surface;
- pleasant eucalyptus scent that lasts for a long time.
How to use:
- Layer 1: apply to a paper towel and rub firmly into the rail;
- 2nd layer: gently apply the preparation onto the rail surface;
- Finishing Liquid takes approximately 10–15 minutes to dry completely on the treated surface and should be carried out in a dust-free area.
Packaging:
- 250ml
Dreve-X-ray stripes 15pcs
To be inserted between layers of an athlete's protector.
Enables detection of a mouthguard on X-rays, e.g. in unconscious patients or when a mouthguard has been swallowed.
Packaging:
- 1 pack/15 pcs.
Plastic brush white Ø 21mm 6pcs
Fine (white) fleece polishing discs for processing and smoothing soft materials, plastics and rails.
Description:
- diameter 21mm;
- white color;
- soft "fleece" polishing discs with a grit of > 1000;
- for mounting on the handpiece holder.
Packaging:
- 1 pack/6 pcs. of discs + 4 support discs for assembly
Lisko-B polishing discs 10 pieces
Plastic polishing discs.
The material from which they are made is characterized by high durability.
Perfect for processing hard films such as Erkoloc-pro and Erkodur.
Features:
- Brown color.
- Coarse grained.
- Disc diameter 28 mm.
- Thickness about 2 - 3 mm.
- To be mounted on a 2.35 mm thick pin.
- Speed range 5,000 - 10,000 rpm
- It is recommended to wear safety glasses when working with Lisko discs.
Packaging:
- 10 pcs. Lisko B discs.
- 1 pc. pin 2.35mm.
- 4 pcs. support discs.
Block-Out Resin 20 syringes + 20 tips
Ultradent LC Block-Out Resin is used to create gel reservoirs in whitening trays and is useful for other laboratory work, such as model repairs.
Application of Ultradent LC Block-Out Resin with the Black Mini Tip is quick and effective.
Characteristics:
- light curing is necessary;
- The resin is not intended for use in the oral cavity.
Use:
- To form the gel reservoirs, apply approximately 0.5 mm of Ultradent LC Block-Out resin to the labial surfaces, remaining approximately 1.5 mm from the gum line, and light cure.
- nDo not go beyond the incisal edges or chewing surfaces.
Packaging:
- Syringe 1.2 ml. x 20 pcs + 20 tips.
Lisko-weiB polishing discs for plastic 10 pieces
Lisko weiß - polishing discs, fine, white.
Application:
- flexible polishing discs with an open structure, designed specifically for the finishing of thermoformable plastics;
- Fine grain discs, ideal for smoothing and preparing surfaces for high gloss polishing.
Characteristics:
- The sponge structure prevents the discs from becoming clogged with plastic chips and prevents overheating of the material being processed. This is crucial when working with soft splints (e.g., sports shin guards) that could melt under the influence of friction.
- universality: perfect for leveling the edges and surfaces of bite splints, retainers, whitening trays and stabilizers;
- smoothing effect: they leave the surface very smooth, which significantly shortens the time of final polishing with pastes.
Packaging:
- 1 set (10 Lisko polishing discs; 4 support discs and 1 mandrel)
Dreve 3D Protector Adhasiv 20ml
Protector glue
For connecting the first Drufosoft® foil with the 3D Protector insert.
Protector Adhäsiv is a one-component adhesive that provides a bond between the 3D Protector material and the Drufosoft (EVA) material.
Packaging:
- 20ml
Liskoid blue polishing discs for plastic 100 pieces
They are used for pre-polishing appliances and splints made using the thermoforming technique (e.g. bite splints, retention splints or whitening trays).
Characteristics:
- thanks to their stable, pressed structure, they are ideal for treating interdental spaces and other hard-to-reach places in splints;
- a unique feature of Liskoids is that the edge of the disc can be sharpened or narrowed by rubbing it against sandpaper, allowing the tool to be precisely fitted into very narrow gaps;
- blue color;
- it is recommended to work at a speed of up to 10,000 rpm (maximum), applying light pressure;
- These are highly wear-resistant discs that do not fray as easily as standard polishing materials;
- disc diameter 27mm;
- thickness 1.5 mm.
Packaging:
- 1 pack/100 pcs.