Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Bridge with overhang ((not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic phase accelerated aging (%) - <15%

• Average transparency - 43%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece