The small and lightweight VP3 easy vacuum pump is a design specifically designed for vacuum generation in Ivoclar porcelain firing furnaces. The diaphragm vacuum pump is characterized by low weight and extremely small dimensions.

Technical data:

• Power supply: 230V / 50-60Hz
• Power Consumption: 70W
• Maximum vacuum: below 40 mbar
• Dimensions: 140 x 130 x 210 mm (W x H x D)
• Warranty 24 months.

Packaging:

• 1 piece.

Porcelain kiln calibration test.

• For Programat ® P200, P300, P310, Programat X1, etc.

Packaging:

• 10 silver stamens.
• 2 coasters.

• With our new Programat CS6 furnace, you can crystallize and sinter restorations faster than ever before with unparalleled aesthetic results.
• The reliable technology behind the Programat CS6 ensures that each case is handled quickly and consistently.

Benefits:

• Ultra-fast crystallization, crystallize IPS e.max in just over 11 minutes.
• Easily reproduce high-quality effects with advanced burn-in technology.
• New patented vacuum technology speeds up sintering.
• This multi-functional oven is compact but can reach temperatures up to 1,560°C (2840°F).
• The optimized firing chamber allows the use of faster programs and, above all, increases the aesthetics of the final restorations.
• In addition to the pre-installed programs for Ivoclar materials, you can easily create additional programs for third-party materials.
• No matter what material you choose, Programat CS6 will speed up the work in the office.

Technical data:

• Mains connection 110 – 240 V~ / 50/60 Hz
• Overvoltage category II
• Safety class I (The device must be grounded via the Internet connection)
• Permissible voltage fluctuations ± 10%
• power consumption 1650 W
• Dimensions Depth: 494mm, Width: 280mm / 415mm (without/with firing tray), Height: 450mm / 573mm (closed/open)
• Firing chamber diameter 55 mm, height: 40 mm.
• Maximum firing temperature 1,560 °C
• Weight 28.5 kg.
• Warranty 24 months

Packaging:

• 1 piece

The high-performance Vacuum Pump VP5 has been specially developed for the Ivoclar Vivadent porcelain firing and pressing furnaces.

• The pump has a very high efficiency and is characterized by a compact design and the presence of a handle for easy carrying.

Benefits:

• Modern, ergonomic design
• High performance
• High ultimate vacuum (approx. 20 mbar*)
• Smoothness of work
• Built-in carrying handle

Technical data:

• 230V/50-60Hz 200V/50-60Hz 115V/50-60Hz 100V/50-60Hz
• Input power: 80W
• Ultimate vacuum: approx. 20 mbar
• Dimensions: 415 x 122 x 230mm (L x W x H)
• Warranty 24 months.

Color:

• Standard: white (special colors are not available)

Packaging:

• 1 piece.

SPECIAL OFFER:

• Buy a Programat P 710 G2 and get a VP5 Vacuum pump for free. (Material sent directly to Technician from Ivoclar Vivadent AG Schaan)

• The new Programat P710 G2 - Your intelligent specialist for high-quality firing results.

• Modern, intuitive, intelligent.
• It is designed to meet the requirements of your dental laboratory.
• Proven technologies such as infrared technology combined with new functions - this is what makes the new Programat ceramic kiln your reliable specialist.

Benefits:

• High process reliability thanks to infrared technology (IRT) [1]:
• The integrated thermographic camera is sensitive to infrared radiation and measures the temperature directly on the surface of the fired objects.
• The kiln head and heater are controlled by an infrared camera to ensure that the pre-defined drying temperature is constantly maintained on the objects in the kiln.
• Modern design.
• A dynamic color concept.
• Ergonomic shapes and forms.
• Optimized firing stand for more space and better cooling.
• High process reliability.
• Fast and high-quality firing results thanks to infrared technology.
• IoT feature for free monthly reports on equipment usage.
• Ready-made programs for different materials.
• Intuitive operation
• New sealed membrane keypad with proven color touchscreen.
• New user interface with new symbols and icons.
• Efficient and reliable performance thanks to software optimization.

Packaging:

• Programat P710 G2 - complete with network cable; vacuum hose; a plate for depositing burnt products; SiC burning table; pliers holder; a set of fired product carriers 2; ATK2 automatic temperature control kit (test kit); USB cable; USB stick; WLAN kit; AD Shade Guide and DSA Holder Set.

• The "ATK2" automatic temperature control set is used to check and adjust firing temperatures in kilns with automatic calibration programs for the ATK2 system (e.g. Programat P500, P510, P700, P710, EP3000, EP3010, EP5000, EP5010).
• A special feature of the ATK2 is the simultaneous dual-range calibration.

Packaging:

• 5 pcs

For regular cleaning of the porcelain kiln by absorbing oxides that precipitate during the firing process.

Benefits:

• Ideal for firing non-precious metal-free alloys and precious metal-free firing alloys as well as for furnace brazing.
• Prevention of pollution and sediment.
• Does not affect the quality of the ceramics.

Package:

• 10 pcs. Including 2 metal locating pins.

SPECIAL OFFER:

• Buy the Programat P 510 / G2 and get the Vacuum pump VP5 for free. (Material sent directly to Technika from Ivoclar Vivadent AG Schaan)

The new Programat P510 G2 - your intelligent specialist for high-quality firing results. Modern, intuitive, intelligent. It is designed to meet the requirements of your dental laboratory. Proven technologies such as infrared technology combined with new functions - this is what makes the new Programat ceramic furnace your reliable specialist.

Benefits:

• High process reliability thanks to infrared technology (IRT) [1]:
• The integrated thermographic camera is sensitive to infrared radiation and measures the temperature directly on the surface of the fired objects.
• The furnace head and heater are controlled by an infrared camera to ensure that a predefined drying temperature is constantly maintained on the objects in the furnace.
• Modern design.
• Dynamic color concept.
• Ergonomic shapes and forms.
• Optimized firing tray for more space and better cooling.
• High process reliability.
• Fast and high-quality firing results thanks to infrared technology.
• IoT function for free monthly hardware usage reports.
• Ready programs for various materials.
• Intuitive operation
• New sealed membrane keyboard with proven color touch display.
• New user interface with new symbols and icons.
• Efficient and reliable performance thanks to software optimization.

Package:

• Programat P510 G2 complete with mains cable; a vacuum hose; a plate for putting away fired products; SiC firing table; a pliers holder; a set of carriers for the fired products 2; automatic temperature control kit ATK2 (test kit); with a USB cable; a USB stick and a WLAN kit.

SPECIAL OFFER:

• Buy the Programat P 310 / G2 and receive the Vacuum pump VP3 easy for free. (Material sent directly to Technika from Ivoclar Vivadent AG Schaan)

The new Programat P310 G2 - your intelligent specialist for high-quality firing results. Modern, intuitive, intelligent. It is designed to meet the requirements of your dental laboratory. Proven technologies combined with new functions - this is what makes the new Programat ceramic furnace your reliable specialist.

Technical data:

• dimensions 32.0 x 49.5 x 32.0 cm without tray, 39.0 x 49.5 x 32.0 cm with tray;
• 200-240 V, 50/60 Hz;
• current consumption max. 8.5A;
• firing temperature max. 1200 ° C;
• firing chamber diameter 90 mm, height 80 mm;
• USB connector;
• weight 15.6 kg.

Benefits:

• New operating unit (membrane keyboard with color touchscreen) with new symbols
• New operating software with a new color concept as well as new symbols and icons
• IoT function - the customer is informed about service work at an early stage to prevent furnace breakdowns
• New, optimized cooling tray - larger storage space for fired objects and optimized cooling in the marginal area
• New design and color concept - perfect integration of the stove into the Ivoclar Vivadent appliance line
• Various software optimizations

Additional Features:

• QTK joint technology
• 300 individual programs
• The OSD display (easy) allows you to easily recognize the operating status even from a distance
• USB and Ethernet interface: The stoves can be connected to a computer / internet at any time for software updates
• Energy saving technology
• Temperature calibration with silver test sample and special program

Package:

• Programat P310 G2 complete with mains cable; a vacuum hose; a plate for putting away fired products; SiC firing table; a pliers holder; a set of carriers for the fired products 2; temperature control kit 2; USB cable and USB stick.

SPECIAL OFFER:

• Buy Programat EP 3010 G2 and get Vacuum pump VP5 for free. (Material sent directly to Technika from Ivoclar Vivadent AG Schaan)

  The new Programat EP 3010 G2 - your intelligent specialist for high-quality stamping results.

Benefits:

• Infrared technology and fully automatic press function (FPF) The innovative infrared technology [2] (IRT) with an integrated thermographic camera measures the exact temperature on the surface of the fired objects and on the ring.
• The Programat oven automatically controls the pre-drying and closing process and adjusts the pressing process accordingly.
• Ironing is now even easier and more economical thanks to the new, patented and fully automatic baling function [3] (FPF).
• Just insert the ring into the stove and press the start button - the stove takes care of the rest.
• Reduced risk of ceramic cracking.
• High process reliability due to constant and reproducible high-quality firing results.
• Optimal coordination of the preheating furnace with the press furnace.
• Automatic, fast and convenient ring size selection

Technical data:

-Sizes 32.0 x 46.5 x 55.0 cm without tray, 39.0 x 46.5 x 55.0 cm with tray; - Power supply 200-240 V, 50/60 Hz; - Current consumption max. 8.5A; - Firing temperature max. 1200 ° C; - Firing chamber diameter 90 mm, height 80 mm; - USB connector; 18.3 kg.

Package:

• Programat EP 3010 G2 complete with mains cable; a vacuum hose; a plate for putting away fired products; SiC firing table; a pliers holder; a muffle cooling grid; a set of carriers for the fired products 2; automatic temperature control kit ATK2 (test kit); with a USB cable; USB flash drive and various accessories.

SPECIAL OFFER:

• Buy Programat EP 5010 G2 and get Vacuum pump VP5 for free. (Material sent directly to Technika from Ivoclar Vivadent AG Schaan)

The new Programat EP 5010 G2 - your intelligent specialist for high-quality stamping results.

Benefits:

• Infrared technology and fully automatic press function (FPF) The innovative infrared technology [2] (IRT) with an integrated thermographic camera measures the exact temperature on the surface of the fired objects and on the ring.
• The Programat oven automatically controls the pre-drying and closing process and adjusts the pressing process accordingly.
• Ironing is now even easier and more economical thanks to the new, patented and fully automatic baling function [3] (FPF).
• Just insert the ring into the stove and press the start button - the stove takes care of the rest.
• Reduced risk of ceramic cracking.
• High process reliability due to constant and reproducible high-quality firing results.
• Optimal coordination of the preheating furnace with the press furnace.
• Automatic, fast and convenient ring size selection

Technical data:

• Sizes 32.0 x 49.5 x 55.0 cm without tray, 39.5 x 49.5 x 55.0 cm with tray;
• Power supply 200-240 V, 50/60 Hz;
• Current consumption max. 8.5A;
• Firing temperature max. 1200 ° C;
• Firing chamber diameter 90 mm, height 80 mm;
• 3 USB connectors;
• SD card reader;
• Weight 20.5 kg.

Package:

• Programat EP 5010 G2 complete with mains cable; a vacuum hose; a plate for putting away fired products; SiC firing table; a pliers holder; a grille for cooling the muffle; a set of carriers for the fired products 2; automatic temperature control kit ATK2 (test kit); WLAN kit; with a USB cable; USB flash drive and various accessories.

Silverwies - a supplementary pack of calibration tests for Temperature Checking Set 2.

Packaging:

• 5pcs

Universal firing furnace for ceramics.

Benefits:

• 100 programs
• durable sleeve with a quartz cover
• easy to read electronic display of programs
• protected against power surges
• possibility of connecting a printer

Technical data:

• waiting temperature range from 0 to 600 C
• temperature increase range from 0 to 1000 ° C
• start of vacuum from 0 to 99%
• heating control from 0 to 200 ° C
• end temperature from 0 to 1200 ° C
• range of vacuum switching on and off from 0 to 1200 C
• cooling range from 1 C / min to 120 C / min.
• maximum power consumption of 1200 W
• dimensions 520 mm x 300 mm x 420 mm

Package:

stove + pump