IPS Ceramic Etching Gel refill 5ml
IPS Ceramic Etching Gel is an etching agent designed to create an adhesive retention surface for ceramic materials deposited using composite materials.
It increases the bonding strength of the composite material (cement) with the ceramic surface.
NOTE! The material cannot be used directly in the mouth.
Packaging:
- Gel 5 ml
Sale IPS d.SIGN Effect 20g
IPS d.SIGN Effect.
Effect masses exhibit opalescence close to natural combined with high translucency.
The purple shade of material reduces the brightness in the incisal edge area.
Packaging:
- 20g
IPS Silicone-Ring small 100g
Silicone ring for IPS Empress 2, IPS Empress Esthetic and IPS e.max. Size small 100g.
Packaging:
1 piece.
IPS Silicone Ring Large 200g
Silicone ring for IPS Empress 2, IPS Empress Esthetic and IPS e.max.
- Large size 200g.
Packaging:
- 1 piece.
IPS e.max CeramTranspa Incisal 20g
IPS e.max Ceram Transpa Incisal, incisal edge material.
IPS e.max® Ceram Incisal and Transpa Incisal exhibit delicate fluorescence and opalescence similar to natural enamel.
High stability and excellent modeling properties enable quick and accurate layering of natural-looking incisal edges and occlusal surfaces.
Packaging:
- 20g
IPS e.max ZirLiner 5g
IPS e.max Ceram ZirLiner.
Used to characterize white zirconium oxide frameworks. Helps match the base color to the base colors in IPS e.max Press and IPS e.max CAD
Packaging:
- 5g.
IPS e.max Ceram Dentin AD 20g
IPS e.max Ceram nano-fluoroapatite ceramic for veneering all-ceramic structures.
Designed for firing onto all IPS e.max components - both glass-ceramic and zirconium oxide.
Thanks to this combination, a clear scheme for applying individual layers, and a combination of aesthetics and durability, the technician can offer the doctor and his patients the maximum shine of individual naturalness.
Characteristics:
Comes in 16 AD colors and 4 Bleach colors.
Packaging:
- 1pc/20g
IPS e.max Ceram Margin 20g
IPS e.max Ceram Margin, a material for modelling the cervical area and for producing ceramic steps on an IPS e.max ZirCAD framework.
Due to the difference in firing temperature compared to dentine and incisal materials, Margin materials demonstrate excellent layering stability.
Packaging:
- 20g
IPS e.max Press HO 5pcs
IPS e.max Press HO.
Original glass ceramic based on lithium disilicate (LS2) for the pressing technique, enabling the production of natural-looking restorations.
The latest production technology has made it possible to obtain an absolutely homogeneous material, which is available in the form of tablets with various opacity.
Characteristics:
- IPS e.max Press HO tablets are ideal for creating frameworks on heavily discoloured stumps;
- mechanical strength 400 Mpa;
- HO tablets with high opacity are available in three colors HO1, HO2, HO3.
Indications:
- crowns in the anterior and posterior sections;
- 3-point bridges.
Packaging:
- 5pcs/1pack
IPS e.max Investment Ring System 200g 3 pieces
The IPSe.max Ring System 200g is used to embed wax-modeled structures in an investment material.
Characteristics:
- the base has been widened, thanks to which the silicone rings fit it perfectly;
- Thanks to their larger size, they are easy to distinguish from the stands used in the Empress system.
Packaging:
- 3 pcs/pack
IPS e.max Alox Plunger 2 pieces
IPS e.max Alox Plunger. The plungers are used to press the molten material into the investment ring mould.
Characteristics:
- are shorter and have a larger diameter than the Empress system pistons;
- The plungers are rounded on both sides, so they can be used for pressing with both ends.
Packaging:
- 2pcs.
IPS e.max Alox Plunger Separator
IPS e.max Alox Plunger Separator. This material prevents the molten material from sticking to the plungers during the pressing process in the furnace. The cold plunger is inserted into the opening of the container and rotated. The powder remains on the surface of the plunger and forms an insulating layer. A very small amount of separator is sufficient. Then the cold, separator-coated plunger is inserted into the hole in the annealed investment ring.
Packaging:
- 20g.
Ips E.max Ceram Gl-Stain liquid allround 15ml
IPS e.max Ceram glazing liquid.
- All-round.
Packaging:
- 15ml
Ips e.max Ceram Transpa 20g
IPS e.max Ceram Transpa.
Characteristics:
- They are used for accurate reproduction of transparent areas with all details, mainly in the incisal area.
Packaging:
- 20g.
IPS e.max Press MO L 3pcs
IPS e.max Press MO (Medium Opacity) are disilicate-lithium glass-ceramic pellets for pressing technology.
Due to their opacity, IPS e.max Press MO pellets are intended for the production of frameworks that are placed on slightly discoloured or living tissues of prepared teeth.
Original glass ceramic based on lithium disilicate (LS2) for the pressing technique, enabling the production of natural-looking restorations.
Characteristics:
- suitable for the layering technique.
Indications:
- crowns in the anterior and posterior sections;
- 3-point bridges;
- hybrid connectors.
Characteristics:
- bending strength 400 Mpa;
MO lozenges with medium opacity, available in 5 colours:
- MO 0 for Bleach colors BL1, BL2, BL3, BL4;
- MO 1 for colors A- D A1,A2,B1,B2,C1;
- MO 2 for colors A- D A3,A3,5;
- MO 3 for colors A- D B3, B4;
- MO 4 for colors A- D A4,C2,C3,C4,D2,D3,D4.
Packaging:
- 3pcs
IPS e.max Ceram Glaze paste fluo 3g
IPS e.max Ceram Glaze FLUO in paste.
Characteristics:
- is used in those areas of the restoration that have not been veneered with IPS e.mac Ceram;
- Additionally, it is applied to frameworks that show no or very little fluorescence.
Packaging:
- 3h.
IPS e.max Press HO L 3pcs
IPS e.max Press HO.
Original glass ceramic based on lithium disilicate (LS2) for the pressing technique, enabling the production of natural-looking restorations.
The latest production technology has made it possible to obtain an absolutely homogeneous material, which is available in the form of tablets with various opacity.
Characteristics:
- IPS e.max Press HO tablets are ideal for creating frameworks on heavily discoloured stumps;
- mechanical strength 400 Mpa;
- HO tablets with high opacity are available in three colors HO1, HO2, HO3.
Indications:
- crowns in the anterior and posterior sections;
- 3-point bridges.
Packaging:
- 3pcs/1pack
IPS e.max Ceram Essence 5g
IPS e.max Ceram Essence, materials for characterizing and staining ceramic restorations, can be fired together with the glaze or separately.
Packaging:
- 5g.
IPS e.max Investment Ring System 100 g, 3 pieces
IPS e.max Investment Ring System 100g is used to embed structures modeled in wax in a protective mass.
Characteristics:
- the base has been widened so that the silicone rings fit it perfectly;
- Thanks to their larger size, they are easy to distinguish from the stands used in the Empress system.
Packaging:
- 3 pcs/pack
IPS e.max Ceram Shade 3g
IPS e.max Ceram Shade. Compounds for the final color modification of prosthetic restorations made of IPS e.max, as well as for the "wash" layer
Packaging:
- 3g.
IPS e.max Press Invex Liquid 1000ml
IPS e.max Press Inwex Liquid is used to dissolve the surface reaction layer formed on embossed elements during the stamping process.
Packaging:
- 1000ml.
IPS e.max Press MO 5pcs
IPS e.max Press MO (Medium Opacity) are disilicate-lithium glass-ceramic pellets for pressing technology.
Due to their opacity, IPS e.max Press MO pellets are intended for the production of frameworks that are placed on slightly discoloured or living tissues of prepared teeth.
Original glass ceramic based on lithium disilicate (LS2) for the pressing technique, enabling the production of natural-looking restorations.
Characteristics:
- suitable for the layering technique.
Indications:
- crowns in the anterior and posterior sections;
- 3-point bridges;
- hybrid connectors.
Characteristics:
- bending strength 400 Mpa;
MO lozenges with medium opacity, available in 5 colours:
- MO 0 for Bleach colors BL1, BL2, BL3, BL4;
- MO 1 for colors A- D A1,A2,B1,B2,C1;
- MO 2 for colors A- D A3,A3,5;
- MO 3 for colors A- D B3, B4;
- MO 4 for colors A- D A4,C2,C3,C4,D2,D3,D4.
Packaging:
- 5pcs
IPS e.max Press LT 5pcs
IPS e.max Press LT low Translucency.
Original glass ceramic based on lithium disilicate (LS2) for the pressing technique, enabling the production of natural-looking restorations.
Characteristics:
- LT lozenges are available in 16 AD key colours and 4 Bleach BL colours;
- Due to their low translucency, they are ideal for making larger restorations, e.g. crowns in the posterior section;
- restorations made of LT pellets are characterized by a natural degree of brightness and chromaticity, which prevents the gray effect of the embedded restorations;
- LT tablets are suitable for working with the cut back technique, they can also be used in the painting technique;
- In the case of the cut back technique, IPS e.max Ceram Incisal and/or Impulse should then be used and the characterisation should be performed with IPS e.max Ceram Essence and Shades.
Application:
- veneers;
- partial crown;
- front and side crown;
- 3-point bridge;
- hybrid connector;
- hybrid crown
Packaging:
- 5pcs/pack
IPS e.max Ceram Deep Dentin AD 20g
IPS e.max Ceram Deep Dentin.
Deep Dentin masses characterized by fluorescence close to natural, increased opacity and color saturation.
They enable achieving a natural tooth colour even when space is limited, and thus enable increasing the colour intensity, especially in the cervical area, which results in a more accurate colour match of the gingival pontic.
Packaging:
- 20g
IPS e.max Ceram Opal Efect 20g
IPS e.max Ceram Impulse Opal Effect.
Opal Effect materials are available in 6 different colours.
Starting from Opal Effect - 1 with naturally increased opalescence and at the same time high translucency - the brightness gradually increases between Opal Effect 2 and 4.
Opal Effect 5 is characterized by a typical opalescent color.
Opal Effect Violet material is used to reduce brightness in the incisal area.
Packaging:
- 20g
IPS e.max Ceram Occlusal Dentin 20g
IPS e.max Ceram Impulse Occlusal Dentin.
Occlusal Dentin materials are available in two colors (Brown and Orange).
They are used to obtain the basic color for chewing surfaces and to intensify saturation.
Packaging:
- 20g
IPS e.max Ceram Mamelon 20g
IPS e.max Ceram Impulse Mamelon.
Mamelon materials are available in three colours (Light, Salmon, Yellow-Orange).
They exhibit high opacity and excellent covering properties, even when applied in thin layers.
Depending on the working method, these materials are laid in thin lines on the surface of the reduced dentine, thus achieving an individualized appearance of the incisal edge.
Packaging:
- 20g
IPS e.max Ceram Incisal Edge
IPS e.max Ceram Impulse Incisal Edge.
This material is used to achieve the effect known as "halo", which is produced in natural teeth by the refraction of light rays at the incisal edge.
Packaging:
- 20g
IPS e.max Glaze Powder Fluo 5g
IPS e.max Ceram Glaze FLUO powder.
Characteristics:
- It is used in areas of the restoration that have not been veneered with IPS e.max Ceram.
- Additionally, it is applied to frameworks that show no or very little fluorescence
Packaging:
- 5g.
IPS Object Fix Flow/Putty 10ml
IPS Object Fix.
- Heat-resistant auxiliary material in the form of a paste, used for securing works on firing stands.
Characteristics:
- flow liquid consistency;
- putty paste consistency.
Packaging:
- 1pc/10ml
Ips e.max Ceram Glaze Spray 120 ml
Ips e.max Ceram Glaze spray.
- For easy and quick glazing of full-contour IPS e.max restorations, pressed, milled or layered (the spray must not be used on IPS e.max CAD in its non-crystallised, "blue" state).
Packaging:
- 120ml
Ips e.max ceram Gingiva Kit
IPS e.max Ceram Gingiva Kit. A set of cramic materials intended for making gum copies.
Packaging:
1 x 5 g IPS e.max Ceram ZirLiner Gingiva
5 x 20 g IPS e.max Ceram Gingiva, colors: 1, 2, 3, 4, 5
4 x 20 g IPS e.max Ceram Intensive Gingiva, colors: 1, 2, 3, 4
3 x 5 g IPS e.max Ceram Essence colors: rose, berry, aubergine
1 x 1 pc, IPS e.max Ceram Gingiva shade guide
IPS e.max Press HT 5 pieces
IPS e.max Press HT (High Translucency).
Original glass ceramic based on lithium disilicate (LS2) for the pressing technique, enabling the production of natural-looking restorations.
HT lozenges are available in 16 AD colours and 4 BL colours for whitened teeth.
Characteristics:
- Due to their high translucency, they are ideal for making smaller restorations, e.g. inlays and onlays;
- HT pellets restorations are characterized by a natural chameleon effect and unusual adaptation to the hard tissues of the tooth;
- HT tablets are ideal for working with the painting technique, as well as for the cut back technique;
- Stain and characterization firing as well as glaze firing can be performed using IPS e.max Ceram Shades, Essence and glaze;
- If correction is necessary, it can be done using IPS e.max Ceram ceramic masses.
Application:
- veneers;
- thin veneers;
- outlays;
- inlay/onlay;
- partial crown.
Packaging:
- 5 pcs/pack
Ips e.max Press LT L 3 pieces
IPS e.max Press LT low Translucency.
Original glass ceramic based on lithium disilicate (LS2) for the pressing technique, enabling the production of natural-looking restorations.
Characteristics:
- LT lozenges are available in 16 AD key colors and 4 Bleach BL colors;
- Due to their low translucency, they are ideal for making larger restorations, e.g. crowns in the posterior section;
- restorations made of LT pellets are characterized by a natural degree of brightness and chromaticity, which prevents the gray effect of the embedded restorations;
- LT tablets are suitable for working with the cut back technique, they can also be used in the painting technique;
- In the case of the cut back technique, IPS e.max Ceram Incisal and/or Impulse should then be used and the characterisation should be performed with IPS e.max Ceram Essence and Shades.
Application:
- veneers;
- partial crown;
- front and side crown;
- 3-point bridge;
- hybrid connector;
- hybrid crown
Packaging:
- 3pcs/pack
IPS Sprue Guide 100g
IPS Sprue Guide It is used to check the correct fixing of the casting channels. For a ring of 100g
Package:
2 pcs
Ips e.max Press HT L 3 pieces
IPS e.max Press HT (High Translucency).
Original glass ceramic based on lithium disilicate (LS2) for the pressing technique, enabling the production of natural-looking restorations.
HT lozenges are available in 16 AD colours and 4 BL colours for whitened teeth.
Characteristics:
- Due to their high translucency, they are ideal for making smaller restorations, e.g. inlays and onlays;
- HT pellets restorations are characterized by a natural chameleon effect and unusual adaptation to the hard tissues of the tooth;
- HT tablets are ideal for working with the painting technique, as well as for the cut back technique;
- Stain and characterization firing as well as glaze firing can be performed using IPS e.max Ceram Shades, Essence and glaze;
- If correction is necessary, it can be done using IPS e.max Ceram ceramic masses.
Application:
- veneers;
- thin veneers;
- outlays;
- inlay/onlay;
- partial crown.
Packaging:
- 5 pcs/pack
IPS e.max Ceram Incisal 20g
IPS e.max Ceram Incisal, incisal edge material.
High stability and excellent modeling properties enable quick and accurate layering of natural-looking incisal edges and occlusal surfaces.
Packaging:
- 20g
Ips E.Max Ceram Add-On 20 g
Ips E.Max Ceram Add-On - corrective mass.
IPS e.max Ceram Add-On materials are available in four shades.
- Add-On Ceram
- Add-On Incisal
- Add-On Margin
- Add-On Bleach
Packaging:
- 20g
Ips E.max Ceram Impulse Kit PROMOTION
Application:
- Characterization and veneering of IPS e.max Press, IPS e.max ZirPress, IPS e.max CAD and IPS ZirCAD restorations;
- Characterization and veneering of ZrO₂ frameworks in the range of the thermal expansion coefficient 10.5-11.0 x 10⁻⁶K⁻¹ (25-500 ° C);
- Layered veneers on refractory material for stumps;
- Shaping of the gingiva on IPS e.max ZirCAD and IPS e.max ZirPress restorations.
Physical data:
- thermal expansion coefficient 9.4 ± 0.5 x 10⁻⁶K⁻¹ (25-400 ° C); firing temperature 730 ° C (1st dentin); bending strength (biaxial) ≥ 50 N / mm²; chemical solubility <100 µg / cm².
Packaging:
- 2 Impulse occlusal dentine (OD orange, OD brown) 20 g each;
- 3 Impulse mamelon (MM light, MM salmon, MM yellow-orange) 20 g each;
- 6 Impulse opal effect (OE1-OE5, OE violet) 20 g each;
- 3 Impulse transpa (T blue, T brown-gray, T orange-gray) 20 g each;
- 1 Impulse incisal edge (IE) 20 g;
- 2 Impulse special incisal (SI yellow, SI gray) à 20 g;
- 1 Impulse inter incisal (white-blue) 20 g;
- 4 Impulse cervical transpa (CT yellow, CT orange-pink, CT khaki, CT orange) 20 g each;
- 1 shade guide (Impulse).
Ips E.Max Ceram Intensive Gingiva 20g
IPS e.max Ceram Gingiva is a set of materials intended for the reconstruction of gingival tissue, especially during the fabrication of implant-supported restorations.
Colors 1 to 4 intensive materials for the creation of an individual gingival shade.
Package:
- 20g
Ips E.Max Ceram Margin color chromascop 130/2A 20 g Sale
Sale - CHROMASCOP colors
IPS e.max Ceram Margin, a material for modelling the cervical area and for producing ceramic steps on an IPS e.max ZirCAD framework.
Due to the difference in firing temperature compared to dentine and incisal materials, Margin materials demonstrate excellent layering stability.
Packaging:
- 20g
Ips E. Max Ceram Gingiva 20g
IPS e.max Ceram Gingiva is a set of materials intended for the reconstruction of gingival tissue, especially during the fabrication of implant-supported restorations.
Colors 1 to 5.
Package:
- 20g
Ips E.max Press Ingots Impulse
Impulse ingots enable the fabrication of restorations with very clear iridescent properties. Opal lozenges are available in two variants with different degrees of brightness (Opal 1, Opal 2). These pastilles are suitable for making veneers with light-colored teeth, where an iridescent effect is needed.
Package:
- 5pcs / 1vial
Ips E.Max Ceram ZirLiner 20g
IPS e.max Ceram ZirLiner.
Used to characterize white zirconium oxide frameworks.
Helps match the base color to the base colors in IPS e.max Press and IPS e.max CAD
Packaging:
- 20g.
IPS E.Max Ceram Dentin 100g AD
IPS e.max Ceram Nano-fluoroapatite ceramic for veneering all-ceramic structures. Intended for firing on all IPS e.max components - both made of glass ceramic and zirconium oxide. Thanks to such a combination, a clear scheme of applying individual layers, and a combination of aesthetics and durability of techniques, it can offer the doctor and his patients the maximum brilliance of individual naturalness.
Physical data:
- Coefficient of thermal expansion 9.4 ± 0.5 x 10⁻⁶K⁻¹ (25-400°C);
- firing temperature 730°C (1st dentin);
- Flexural strength (biaxial) ≥50 N/mm²;
- Chemical solubility <100µg/cm².
- Packaging 100g Available in 16 AD colors
Application:
- Characterization and veneering of IPS e.max Press, IPS e.max ZirPress, IPS e.max CAD and IPS ZirCAD restorations;
- Characterization and veneering of ZrO₂ frameworks in the range of thermal expansion coefficient 10.5-11.0 x 10⁻⁶K⁻¹ (25-500°C);
- Veneers layered on refractory die material;
- Gingival shaping on aus IPS e.max ZirCAD and IPS e.max ZirPress restorations.
Packaging:
- 1pc/100g
IPS E. max Ceram Transpa Incisal 100g
IPS e.max Ceram Transpa Incisal, incisal material.
Package:
- 100 g.