Product Code:: 8031
Acetal Dental 500 g
Pressing Dental

69.46€ +vat

75.01€ incl tax

Acetal Dental 500 g

ACETAL DENTAL - jest materiałem nietoksycznym i nie wywołuje alergii.

Stanowi odpowiednie zastępstwo dla żywicy akrylowej i metalu w wielu pracach protetycznych.

Zastosowanie acetalu:

  • klamry estetyczne do protez tzw. szkieletowych,

  • protezy częściowe,

  • mosty i mosty na teleskopy,

  • elementy protetyczne na implantach,

  • szyny nagryzowe i stabilizujące,

  • elementy retencyjne na belkach stanowiące jednocześnie wzmocnienie.

Dane techniczne:

  • Temperatura wtrysku - 220 °C
  • Czas topienia materiału - 20min
  • Wtrysk i podgrzewanie - 2-3 min
  • Czas chłodzenia pod stałym ciśnieniem - 20-40 min
  • Ciśnienie robocze - 4,0 Bary

Opakowanie:

  • 500 g

Product Code: 8031
Acetal Dental 500 g

69.46€ +vat

75.01€ incl tax

Product Code:: 8037
F.J.P. Żywica Termoplastyczna kolor B
Pressing Dental

97.90€ +vat

105.74€ incl tax

F.J.P. Żywica Termoplastyczna kolor B

Nowa żywica termoplastyczna to alternatywa dla powszechnie używanych materiałów z grupy poliamidów czyli "nylonów" takich jak: "Valplast", "Flexite", "Flexi J". Protezy dentystyczne wytwarzane z tych materiałów słyną ze swojej wysokiej estetyki oraz uznania wśród pacjentów użytkujących takie protezy. Tradycyjne poliamidy oprócz swoich niewątpliwych zalet posiadają również wady, które utrudniają obróbkę oraz utrzymanie w czystości protez z nich wykonanych. Wieloletnie badania nad udoskonaleniem tworzyw nylonowych doprowadziły do stworzenia nowego materiału pozbawionego tych wad.

Materiał firmy Pressing Dental, F.J.P posiada natępujące cechy:

  • Jest lekko elastyczny, dzięki czemu jest bardzo łatwy w obróbce, przy użyciu tradycyjnych metod i narzędzi. Zmniejszona elastyczność wpływa korzystnie na podłoże protetyczne, nie powoduje traumy związanej z użytkowaniem protezy elastycznej.
  • jest półprzezroczysty dzięki czemu idealnie stapia się z błoną śluzową pacjenta, sprawiając, że użytkowana proteza jest niezauważalna w ustach.
  • W przeciwieństwie do tradycyjnych nylonów prawie nie chłonie wody (tylko 1/3 tego co tradycyjny nylon) co znacznie przdłuża żywotność protez.
  • Psiada bardzo dobrą stabilność koloru, nie przebarwia się podczas użytkowania.
  • Precyzja zapewnia bardzo dobre przyleganie do podłoża.
  • Nie odkształca się.
  • Można poddawać go sterylizacji w 120 stopniach Celcjusza.
  • Nie tworzy pęcherzyków powietrza nawet przy bardzo cienkich elementach.
  • Nie trzeba go osuszać przed wtsryskiem.
  • Jest łatwy w obróbce, daje się dobrze wypolerować.
  • Łączy się chemicznie z akrylem przy użyciu kleju.
  • Można go naprawiać i dokonywać poprawek.
  • Raz przetopiony można wtryskiwać po raz drugi (należy dodać 40- 50% do nowego materiału) bez utraty właściwości mechanicznych i fizycznych.

Opakowanie:

  • 250 g.

Product Code: 8037
F.J.P. Żywica Termoplastyczna kolor B

97.90€ +vat

105.74€ incl tax

Product Code:: 9485
Thermo Bridge Pink 200g
Pressing Dental

31.40€ +vat34.96€

33.91€ incl tax

Thermo Bridge Pink 200g

Thermo Bridge pink color. Acrylic resin free from monomer for injection under pressure.

Application:

  • removable dentures
  • partial dentures
  • complete dentures.

Package:

200g

Product Code: 9485
Thermo Bridge Pink 200g

31.40€ +vat34.96€

33.91€ incl tax

Product Code:: 10715
Villacryl Thermo Press 250g
Everall7

86.33€ +vat

93.23€ incl tax

Villacryl Thermo Press 250g

Najwyższej jakości mikrokrystaliczne tworzywo na bazie poliamidu zapewnia idealne dopasowanie protez, stabilność barw oraz łatwą obróbkę gwarantującą idealnie gładką i błyszczącą powierzchnię protezy.

Villacryl Thermo Press dedykowany jest do wszystkich protez osiadających takich jak:

  • protezy całkowite,

  • protezy częściowe,

  • mikroprotezy,

  • elementy retencyjne w protezach szkieletowych,

  • szyny relaksacyjne,

  • utrzymywacze przestrzeni.

Dostępny w 4 kolorach:

  • T2 mlecznoróżowy

  • T3 ciemnorózowy

  • T4 różowy

  • 0 transparentny

Opakowanie:

  • 250 g

Product Code: 10715
Brands Everall7
Villacryl Thermo Press 250g

86.33€ +vat

93.23€ incl tax

Product Code:: 11632
Deflex - M10 XR - L 32.6g diameter 22mm - complete dentures + large partial
Deflex

10.79€ +vat

11.66€ incl tax

Deflex - M10 XR - L 32.6g diameter 22mm - complete dentures + large partial

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional acrylic "cold" so that the material can be repaired and relined in a traditional way.

Application:

  • Complete dentures,
  • partial dentures with supports,
  • overdenture dentures,
  • partial dentures on clasps

The colors of the Deflex materials are a combination of translucency and shades of pink, which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Characteristics:

  • Does not contain residual monomer. Very easy to polish to "high gloss".
  • Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes.
  • The absorption index at the level of 0.3% guarantees many years of use of the prosthesis without affecting its aesthetics
  • All Deflex cartridges are packed in a way that guarantees proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Medium Pink - veined pink
  • Intense Pink - veined intense pink (opaque for work on frameworks)

Package:

tube 32.6 g

Product Code: 11632
Brands Deflex
Deflex - M10 XR - L 32.6g diameter 22mm - complete dentures + large partial

10.79€ +vat

11.66€ incl tax

Product Code:: 11785
Deflex - M10 XR - M 23.2g diameter 22mm - partial dentures
Deflex

10.01€ +vat

10.81€ incl tax

Deflex - M10 XR - M 23.2g diameter 22mm - partial dentures

Characteristic:

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional acrylic "cold" so that the material can be repaired and relined in a traditional way.

Application:

Full dentures, partial dentures with supports, overdentures, partial dentures with clasps

The colors of the Deflex materials are a combination of translucency and shades of pink, which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Characteristics:

Does not contain residual monomer. Very easy to polish to "high gloss". Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes. The absorption index at the level of 0.3% guarantees long-term use of the prosthesis without affecting its aesthetics. All Deflex cartridges are packed in a way that guarantees the proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Medium Pink - veined pink
  • Intense Pink - veined intense pink (opaque for work on frameworks)

Package:

Tube: 23.2 g

Product Code: 11785
Brands Deflex
Deflex - M10 XR - M 23.2g diameter 22mm - partial dentures

10.01€ +vat

10.81€ incl tax

Product Code:: 11787
Deflex - M10 XR - S 14.9g diameter 22mm - repairs - touching the buckle
Deflex

9.02€ +vat

9.75€ incl tax

Deflex - M10 XR - S 14.9g diameter 22mm - repairs - touching the buckle

Characteristic:

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional acrylic "cold" so that the material can be repaired and relined in a traditional way.

Application:

Full dentures, partial dentures with supports, overdentures, partial dentures with clasps

The colors of the Deflex materials are a combination of translucency and shades of pink, which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Characteristics:

  • Does not contain residual monomer. Very easy to polish to "high gloss".
  • Thanks to its stiffness and fracture resistance, it allows you to perform work of reduced thickness with delicate pelottes.
  • The absorption index at the level of 0.3% guarantees many years of use of the prosthesis without affecting its aesthetics

All Deflex cartridges are packed in a way that guarantees proper behavior of the material during injection and processing. Before thermoplastic materials are subjected to thermal processes, they are sensitive to moisture, therefore Deflex tubes, apart from plastic protective packaging, also contain a preparation that protects the material against excess moisture.

Available in colors:

  • Banner
  • Soft Pink - slightly veined pink transparent
  • Medium Pink - veined pink
  • Intense Pink - veined intense pink (opaque for work on frameworks)

Package:

tube 14.9 g

Product Code: 11787
Brands Deflex
Deflex - M10 XR - S 14.9g diameter 22mm - repairs - touching the buckle

9.02€ +vat

9.75€ incl tax

Product Code:: 11788
Acrilato - injection acrylic without residual monomer - 32.6 g cartridge
Deflex

9.61€ +vat

10.38€ incl tax

Acrilato - injection acrylic without residual monomer - 32.6 g cartridge

Application:

Complete dentures

Characteristics:

Prostheses made of Acrilato fd material are characterized by higher resistance to mechanical damage and lower weight than prostheses made of conventional acrylic.

  • They are completely devoid of residual monomer.
  • The contraction during polymerization at the level of 0.3% guarantees a perfect fit of the denture in the patient's mouth.
  • The material is chemically bonded with traditional "cold" acrylics, which allows it to be repaired or relined in a simple and quick way.

It does not cause allergies.

Package:

Tube: 32.6g

Product Code: 11788
Brands Deflex
Acrilato - injection acrylic without residual monomer - 32.6 g cartridge

9.61€ +vat

10.38€ incl tax

Product Code:: 13414
Deflex Acetal 100g (8 cubes)
Deflex

11.38€ +vat

12.29€ incl tax

Deflex Acetal 100g (8 cubes)

Deflex Acetal - is a non-toxic material and does not cause allergies.

It is a suitable replacement for acrylic resin and metal in many prosthetic works. Possible work without expansion plaster.

Acetal application:

  • aesthetic buckles for prostheses, the so-called skeletal,
  • partial dentures,
  • bridges and bridges for telescopes,
  • prosthetic elements on implants,
  • bite and stabilizing splints,
  • retention elements on the beams which are also reinforcement.

Injection temperature - 245 degrees C (+/- 5C) Material melting time - 15min Injection and heating - 30-60 seconds Cooling time under constant pressure - 30 minutes Working pressure - 5.0-7.0 Bar

Package:

8 cubes, min 100g.

Product Code: 13414
Brands Deflex
Deflex Acetal 100g (8 cubes)

11.38€ +vat

12.29€ incl tax

Product Code:: 14311
Valplast 500g
Valplast International Corp

88.29€ +vat

95.35€ incl tax

Valplast 500g

Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal staples.

Attention:

  • should be injected into a cold can

Technical data:

  • Heating time / temperature: 10 minutes at 235C
  • Setting time (holding the piston): 10 minutes (under the compression of the piston)
  • It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
  • Pressure: 6-8 Bar

Package:

500g

Product Code: 14311
Valplast 500g

88.29€ +vat

95.35€ incl tax

Product Code:: 14328
Valplast 50g
Valplast International Corp

11.58€ +vat

12.50€ incl tax

Valplast 50g

Valplast Popular nylon-based flexible thermoplastic material for the fabrication of partial dentures without metal clasps.

Attention:

  • should be injected into a cold can

Technical data:

  • Heating time / temperature: 10 minutes at 235C
  • Setting time (holding the piston): 10 minutes (under the compression of the piston)
  • It is not recommended to accelerate cooling with cold water (shrinkage), we cool the can in a natural way.
  • Pressure: 6-8 Bar

Package:

50g

Product Code: 14328
Valplast 50g

11.58€ +vat

12.50€ incl tax

Product Code:: 14516
Deflex PEEK OSSIS injection granules beige 20g Promotion
Deflex

42.58€ +vat

45.98€ incl tax

Deflex PEEK OSSIS injection granules beige 20g Promotion

The manual is available in the DOWNLOAD section on www. mikran.pl Injection granules, beige color.

The biocompatible PEEK OSSIS injection material is ideal for:

  • individual connectors
  • structures of crowns and bridges (1-2 spans)
  • anatomical structures of crowns and bridges
  • Maryland bridges
  • telescopic crowns
  • constructions of beams for overdentures
  • hybrid dentures
  • other implantoprosthetic works
  • removable dentures.

The material can be used to work on a deflex injection molding machine and other devices operating at a temperature of 390 ° C.

PEEK OSSIS removable dentures are made in the traditional canning method (such as acetal), while permanent restorations are made using a special set of rings (adapted only to the Deflex device) and an investment material.

Package:

20 g

Product Code: 14516
Brands Deflex
Deflex PEEK OSSIS injection granules beige 20g Promotion

42.58€ +vat

45.98€ incl tax

Product Code:: 14517
Deflex - PEEK Ossis set of rings for frameworks Promotion
Deflex

155.00€ +vat

167.40€ incl tax

Deflex - PEEK Ossis set of rings for frameworks Promotion

Biocompatible PEEK Ossis material for injection.

A set of rings that allows the injection of material onto the frameworks (crowns, bridges). The material should be veneered with composite.

Package:

  • 4 casting rings (different sizes)
  • Ring cover
  • A stand for the rings attaching the socket to the injection molding machine.

Product Code: 14517
Brands Deflex
Deflex - PEEK Ossis set of rings for frameworks Promotion

155.00€ +vat

167.40€ incl tax

Product Code:: 14549
Deflex PEEK OSSIS granules for injection, pink color 20g Promotion
Deflex

39.04€ +vat

42.17€ incl tax

Deflex PEEK OSSIS granules for injection, pink color 20g Promotion

The manual is available in the DOWNLOAD section on www. mikran.pl Injection granules, pink color.

The biocompatible PEEK OSSIS injection material is ideal for:

  • individual connectors
  • structures of crowns and bridges (1-2 spans)
  • anatomical structures of crowns and bridges
  • Maryland bridges
  • telescopic crowns
  • constructions of beams for overdentures
  • hybrid dentures
  • other implantoprosthetic works
  • removable dentures.

The material can be used to work on a deflex injection molding machine and other devices operating at a temperature of 390 ° C.

PEEK OSSIS removable dentures are made in the traditional canning method (such as acetal), while permanent restorations are made using a special set of rings (adapted only to the Deflex device) and an investment material.

Package:

20 g

Product Code: 14549
Brands Deflex
Deflex PEEK OSSIS granules for injection, pink color 20g Promotion

39.04€ +vat

42.17€ incl tax

Showing 1 to 14 of 14 (1 Pages)