Semi-circular wax profiles 2.0x1.0 mm
Semi-circular wax profiles 2.0x1.0mm.
Characteristics:
- No surface tension;
- Very smooth.
Packaging:
- 50g
Round wax profiles 0.6 mm
Round wax profiles 0.6mm.
Characteristics:
- No surface tension;
- Very smooth.
Packaging:
- 12g
PK Dentaurum wax templates
PK wax templates for premolars.
Characteristics:
- Made from the best raw materials;
- No fillers, burning without residue.
Packaging:
- 200pcs/pack
MK Dentaurum wax templates
MK wax templates for molar clasps.
Characteristics:
- Made from the best raw materials:
- Without fillers, burning without residue.
Packaging:
- 200pcs/pack
Wax templates RN III Dentaurum
Wax templates RN III round retention mesh.
Characteristics:
- Made from the best raw materials;
- Without fillers, burning without residue.
Packaging:
- 20pcs/pack
Wax templates LR Dentaurum
LR wax templates retentions with holes for the mandible, offset.
- Length 130mm;
- Width 7mm.
Characteristics:
- Made from the best raw materials;
- No fillers, burning without residue.
Packaging:
- 25pcs/pack
RKG Dentaurum wax templates
RKG wax templates straight circular clamps.
Characteristics:
- Made from the best raw materials;
- Without fillers, burning without residue.
Packaging:
- 200pcs/pack
TK I Dentaurum wax templates
TK wax templates and Bonyhard clamps.
Characteristics:
- Made from the best raw materials;
- No fillers, burning without residue.
Packaging:
- 200 pcs. of clamps/pack.
Undercut Blocking Wax 70g
Underpass blocking wax - pink.
This wax was developed to block undercuts, to apply clamp steps and to relieve critical areas of models.
Characteristics:
- Can be scraped and cut well;
- Adheres strongly to the model and does not lose its shape even when rinsed in water and duplicated at temperatures up to 54 °C;
- Melting point from 90 °C;
- Freezing point approximately 68 °C.
Packaging :
- 70g
Semi-circular wax profiles 3.5x1.75mm
Semi-circular wax profiles 3.5x1.75mm.
Characteristics:
- No surface tension;
- Very smooth.
Packaging:
- 65g.
BEGO grave corrugated wax 0.5mm
Textured casting wax (marka) green.
Characteristics:
- Thickness 0.5mm;
- Clearly veined;
- Plate 15x7.5cm;
- Proven wax for modeling plates of maxillary skeleton dentures;
- The wax texture gives the denture plate a more anatomical surface;
- Adapts well and adheres precisely to the model.
Packaging :
- 15pcs/pack
PR II Dentaurum wax templates
Wax templates PR II large retention arch.
Characteristics:
- Made from the best raw materials;
- No fillers, burning without residue.
Packaging :
- 24pcs/pack
Self-adhesive wax 0.5mm
Preparatory and casting wax.
Characteristics:
- Self-adhesive;
- Soft;
- Tight fit;
- Transparent;
- Tiles 10x10cm;
- Thickness 0.5mm.
Packaging :
- 32 tiles.
BEGO corrugated wax mittel 0.5 mm
Textured casting wax (marka) green.
Characteristics:
- Thickness 0.5mm;
- Medium veined;
- Plate 15x7.5cm;
- Proven wax for modeling plates of maxillary skeleton dentures;
- The wax texture gives the denture plate a more anatomical surface;
- Adapts well and adheres precisely to the model.
Packaging:
15pcs/pack
Wax templates for circular buckles
Wax templates for circular clasps, curved.
Characteristics:
- These pre-shaped clasp profiles simplify modeling and save time.
- The shape of the profiles allows for a wide range of applications thanks to the possibility of individual modification.
Packaging :
- 200pcs/pack
Wax templates for Dentaurum circular clasps
RK wax templates circular curved clamps.
Characteristics:
- Made from the best raw materials;
- No fillers, burning without residue.
Packaging :
- 200pcs/pack
TK wax templates and clamps
TK Wax Templates and Bonyhard Clasps.
Characteristics:
- These pre-shaped clasp profiles simplify modeling and save time.
- The shape of the profiles allows for a wide range of applications thanks to the possibility of individual modification.
Packaging :
- 200pcs/pack
MK wax templates buckles
MK wax templates for molar clasps.
Characteristics:
- These pre-shaped clasp profiles simplify modeling and save time.
- The shape of the profiles allows for a wide range of applications thanks to the possibility of individual modification.
Packaging:
- 200pcs/pack
Sublingual wax profiles 4x1.7mm
Sublingual arches to the mandible.
Characteristics:
- Teardrop shape;
- Size 4.0 x 1.7mm.
Packaging:
- 65g/pack
Semi-circular wax profiles 1.5x0.75mm
Semi-circular wax profiles 1.5x0.75mm.
Characteristics:
- No surface tension;
- Very smooth.
Packaging :
- 25g/pack
Semi-circular wax profiles 1.8x0.9 mm
Semi-circular wax profiles 1.8 x 0.9mm.
Characteristics:
- No surface tension;
- Very smooth.
Packaging :
- 50g
Sublingual wax profiles 4x2 mm
Sublingual wax arches for the mandible.
Characteristics:
- Teardrop shape;
- 4.0x2.0mm.
Packaging :
- 65g/pack
Wax templates RN I Dentaurum
RN wax templates and thick retention grid.
Characteristics:
- Made from the best raw materials;
- No fillers, burning without residue.
Packaging :
- 20pcs/pack
Wax templates for premolar and molar clasps
Wax clasp profiles for molars and premolars, medium-hard, retaining their shape.
Characteristics:
- On molars and premolars, the semi-droplet cross-section prevents food residue from settling and increases stability along the entire length of the clasps, giving them a very slender shape;
- Very good patient acceptance.
Packaging:
- 280pcs buckles/1pack
BEGO mittel corrugated wax 0.6mm
Textured casting wax (marka) green.
Characteristics:
- Thickness 0.6mm;
- Medium veined;
- Plate 15x7.5cm;
- Proven wax for modeling plates of maxillary skeleton dentures;
- The wax texture gives the denture plate a more anatomical surface;
- Adapts well and adheres precisely to the model.
Packaging:
- 15pcs/1pack
BEGO smooth casting wax 0.5mm
Smooth casting wax.
It adheres strongly and burns without residue.
Characteristics:
- Dimensions 17.5x8cm;
- Thickness 0.5mm;
- Green color.
Packaging:
- 15pcs/1pack
BEGO smooth casting wax 0.4mm
Smooth casting wax.
It adheres strongly and burns without residue.
Characteristics:
- Green color;
- Thickness 0.4mm;
- Size 17.5x8cm.
Packaging :
- 15pcs/1pack
BEGO mittel corrugated wax 0.4mm
Textured casting wax (marka) green.
Characteristics:
- Thickness 0.4mm;
- Medium veined;
- Plate 15x7.5cm;
- Proven wax for modeling plates of maxillary skeleton dentures;
- The wax texture gives the denture plate a more anatomical surface;
- Adapts well and adheres precisely to the model.
Packaging:
15pcs/1pack
SU Round wax retentions
Perforated round wax retentions, length 135 mm.
Characteristics:
- For modeling retention locations of skeleton bases.
- The retentions are made of a wax composition with high stability and plasticity.
- They adhere to the model very well.
Packaging :
- 25 pcs/pack
SU Wax stencils RN III
RN III wax templates, round retention mesh.
Characteristics:
- They are produced from casting wax developed especially for this purpose.
- They are characterized by high flexibility and adhesion.
Packaging:
- 20 pcs/pack
Self-adhesive wax 0.4mm
Preparatory and casting wax.
Characteristics:
- Self-adhesive;
- Soft;
- Tight fit;
- Transparent;
- Tiles 10x10 cm;
- Thickness 0.4mm.
Packaging:
- 32 tiles
BEGO corrugated grave wax 0.4mm
Textured casting wax (marka) green.
Characteristics:
- Thickness 0.4mm;
- Clearly veined;
- Plate 15x7.5cm;
- Proven wax for modeling plates of maxillary skeleton dentures;
- The wax texture gives the denture plate a more anatomical surface;
- Adapts well and adheres precisely to the model.
Packaging :
- 15pcs/1pack
KR Dentaurum wax templates
KR wax templates retention comb.
Characteristics:
- Made from the best raw materials;
- No fillers;
- Burning without leaving any residue.
Packaging:
- 80pcs/pack
Round wax profiles 0.8mm
Round wax profiles, size 0.8mm.
Characteristics:
- No surface tension,
- Very smooth.
Packaging :
- 25g/pack
Wax templates RN II Dentaurum
Wax templates RN II thin retention grid.
Characteristics:
- Made from the best raw materials;
- No fillers;
- Burning without leaving any residue.
Packaging:
- 20pcs/pack
SU Sublingual wax profiles 4.0x1.7mm
Sublingual wax profile.
- Teardrop shape 4.0 x 1.7 mm.
Packaging:
- 65g/pack
BEGO smooth casting wax 0.6mm
Smooth casting wax.
It adheres strongly and burns without residue.
Characteristics:
- Green color;
- Thickness 0.6mm;
- Size 17.5x8cm.
Packaging :
- 15pcs/1pack
PK wax templates buckles
PK wax templates clasps for premolars.
Characteristics:
- Pre-shaped clasp profiles simplify modelling and contribute to time savings;
- The shape of the profiles allows for a wide range of applications thanks to the possibility of individual modification.
Packaging:
- 200pcs/1pack
RKG wax templates buckles
Wax templates - ring clasps profile, straight.
- Delicate standard clasp profiles for molars.
Packaging:
- 200pcs/1 pack
SU Sublingual wax profiles 3.1x1.2mm
Sublingual profile, teardrop shape, 3.1 x 1.2 mm.
Packaging:
- 50g/pack
SU Round wax retentions, interleaved
Perforated round wax retentions, interleaved.
Length 135 mm.
Packaging :
- 25 pcs/pack
BEGO corrugated grave wax 0.6mm
Textured casting wax (marka) green.
Characteristics:
- Thickness 0.6mm;
- Clearly veined;
- Plate 15x7.5cm;
- Proven wax for modeling plates of maxillary skeleton dentures;
- The wax texture gives the denture plate a more anatomical surface;
- Adapts well and adheres precisely to the model.
Packaging :
- 15pcs/1pack
GEO Wax Templates TK I Bonyhard
GEO Bonyhard clasps, TK wax templates and Bonyhard clasps.
- Renfert catalog number 6383010
Packaging:
- 10 panels/200 pcs.
SU Sublingual wax profiles 3.3x1.7mm
Sublingual profile, teardrop shape, 3.3 x 1.7 mm.
Packaging:
- 50g/pack