Stodent III Ortho is a type 3 hard orthodontic plaster recommended for archival, diagnostic and working models for the production of removable orthodontic appliances.

Description:

• Glossy white color.
• Small expansion.

Advantages:

• Smooth surface.
• Easy to prepare and process.
• Surface abrasion resistance.

Technical data:

• Mixing ratio approx. 28-30 ml / 100 g.
• Mixing time (vacuum) 30 s.
• Mixing time (manual) 60 – 90 sec.
• Setting time 10 -14 min.
• Impression release time 45 min.
• Compressive strength (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2h ) max. 0.15% [< 0.20 %]

Packaging:

• bag 25 kg

Description:

• Stodent III is a type 3 hard plaster recommended for antagonistic models and working models for the fabrication of removable and skeletal dentures.
• Light green color enriched with mango aroma
• A little expansion
• Good mechanical properties

Advantages:

• Smooth surface
• Simplified modeling due to high thixotropy
• High fracture resistance during release from the impression

Technical data:

• The mixing ratio is 30 ml / 100 g
• Stirring time (vacuum) 30 s
• Mixing time (manual) 60 - 90 s
• Setting time 10-14 min.
• Time to release from the impression 45 min.
• Compressive strength (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2h ) max. 0.15% [<0.20 %]

Packaging:

• 3 kg.

Stodent III is a type 3 hard plaster recommended for antagonist models and working models in the manufacture of removable and skeletal dentures.

Description:

• Available in: yellow
• Small expansion
• Good mechanical properties

Benefits:

• Smooth surface
• Facilitated model making due to high thixotropy
• High breakage resistance during release from the impression

Technical data:

• Mixing ratio 30 ml / 100 g
• Mixing time (vacuum) 30 s
• Mixing time (manual) 60 – 90 sec
• Setting time 10 -14 min.
• Impression release time 45 min.
• Compressive strength (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2h ) max. 0.15% [< 0.20 %]

Packaging:

• 25 kg

Gypsum III class Eco Stone 5kg. yellow Hard synthetic gypsum, type 3, of high quality, intended for casting works in the technique of partial dentures, skeletal dentures and orthodontic appliances. It meets the requirements of ISO 6873-3. Certificate of Admission No. IL-5629/MS.

Eco Stone III class gypsum provides:

• Obtaining models with high durability.
• Minimum, uniform coefficient of expansion.
• Consistent level of quality.

Physical properties :

• Hardening time: approx. 10 min.
• Compressive strength after 1 h: more than 20 N/mm sq.
• Hardness after 24 hours over 80 N/sq
• Linear expansion after 2 hours : below 0.14%

How to use:

Mixing ratio:

• Gypsum 100 g : 30 ml.
• Water: gypsum 0.3 ml/g.
• Operating temperature approx. 23 °C.
• Fast in no more than 10 seconds. pour gypsum into water in the proportions given above.
• Wait 20 sec. until the water is absorbed by the gypsum.
• Mechanical mixing : 30 sec.
• Manual mixing: 60 sec.

During this time, the gypsum reaches the optimum consistency for pouring into model molds on a shaker. Shaking time: approx. 6 min. After this time, stop shaking so as not to disturb the crystallization process.

Storage :

• At least 12 months in sealed, moisture-proof packaging.

Packaging:

• 5kg.

Articulation plaster, quick-setting for fixing models in articulators with very good stability with minimal expansion.

Characteristic:

• Articulation plaster, white color.

Parameters:

• Mixing ratio: 30 ml / 100 g
• Working time: 90 sec.
• Setting time: 3 min
• Expansion after setting: 0.01%
• Compressive strength 1h: 25 Mpa

Package:

• 10 kg. (5x2kg)

Eco Stone Blue color Hard synthetic gypsum, type 3, of high quality, intended for casting works in the technique of partial dentures, skeletal dentures and orthodontic appliances. It meets the requirements of ISO 6873-3. Certificate of Admission No. IL-5629/MS.

Eco Stone provides:

• Obtaining models with high durability.
• Minimum, uniform coefficient of expansion.
• Consistent level of quality.

Physical properties :

• Hardening time: approx. 10-12 min.
• Compressive strength after 1 h: more than 20 N/mm sq.
• Hardness after 24 hours over 80 N/sq
• Linear expansion after 2 hours : below 0.14%

How to use:

Mixing ratio:

• Gypsum : water 100 g : 30 ml.
• Water: gypsum 0.3 ml/g.
• Operating temperature approx. 23° C.
• Fast in no more than 10 seconds. pour gypsum into water in the proportions given above and wait 20 seconds. until the water is absorbed by the gypsum.
• Mechanical mixing : 30 sec.
• Manual mixing: 60 sec.

During this time, the gypsum reaches the optimum consistency for pouring into model molds on a shaker. Shaking time: approx. 6 min After this time, stop shaking so as not to disturb the crystallization process.

Storage :

• At least 12 months in sealed, moisture-proof packaging.

Packaging:

• 5kg.

Stodent III is a type 3 hard plaster recommended for antagonistic models and working models for the fabrication of removable and skeletal dentures.

Description:

• Available in color: yellow
• A little expansion
• Good mechanical properties

Advantages:

• Smooth surface
• Facilitated model making due to high thixotropicity
• High fracture resistance when released from the impression

Technical data:

• The mixing ratio is 30 ml / 100 g
• Stirring time (vacuum) 30 s
• Mixing time (manual) 60 - 90 s
• Setting time 10-14 min.
• Time to release from the impression 45 min.
• Compressive strength (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2h ) max. 0.15% [<0.20 %]

Package:

• 5 kg

Stodent III is a type 3 hard plaster recommended for antagonist models and working models in the manufacture of removable and skeletal dentures.

Description:

• Available in: blue
• Small expansion
• Good mechanical properties

Benefits:

• Smooth surface
• Facilitated model making due to high thixotropy
• High breakage resistance during release from the impression

Technical data:

• Mixing ratio 30 ml / 100 g
• Mixing time (vacuum) 30 s
• Mixing time (manual) 60 – 90 sec
• Setting time 10 -14 min.
• Impression release time 45 min.
• Compressive strength (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2h ) max. 0.15% [< 0.20 %]

Packaging:

• 25 kg

Plaster for working models when making removable orthodontic appliances.

Characteristic:

• Low degree of linear expansion.

• Glossy white color.

• High liquidity.

Advantages:

• Smooth surface.

• Easy to prepare and process.

• Surface abrasion resistance.

parameters:

• White color.
• Mixing ratio 30 ml / 100 g.
• Setting time 10 - 12 min.
• Linear expansion after 2h < 0.13%.

Packaging:

• 5kg

Stodent III is a type 3 hard plaster recommended for antagonistic models and working models for the fabrication of removable and skeletal dentures.

Description:

• Available in color: blue
• A little expansion
• Good mechanical properties

Advantages:

• Smooth surface
• Facilitated model making due to high thixotropicity
• High fracture resistance when released from the impression

Technical data:

• The mixing ratio is 30 ml / 100 g
• Stirring time (vacuum) 30 s
• Mixing time (manual) 60 - 90 s
• Setting time 10-14 min.
• Time to release from the impression 45 min.
• Compressive strength (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2h ) max. 0.15% [<0.20 %]

Package:

• 3 kg

Hinrizit E is a dental plaster with a special formula and high bond expansion. This special gypsum is used for the production of models and for canning plastic prostheses, due to its high bond expansion, it compensates for the contraction of plastics from which the prostheses are made (eg SR Ivocap Injection System, Acetal, Deflex, FJP, Valplast). Hinrizit E can be used with all plastics for the production of dentures.

Application:

• Technique of producing plastic dentures

Properties:

• White color

• Water: gypsum ratio - 25: 100

• Mixing time in min. - 5-6

• Hardening time in min. - 10-12

• Expansion in the bonding process - 0.60

• Compressive strength after 1 hour. - 30 MPa

• Dry compression strength - 60 MPa

Package:

• 5 kg.

Eco Stone 3rd class gypsum 25kg yellow Hard synthetic gypsum type 3 in yellow, high quality, intended for casting works in the technique of partial settling dentures, frame and orthodontic appliances. It meets the requirements of the ISO 6873-3 standard. Certificate of Admission No. IL-5629/MS.

Eco Stone III class gypsum provides:

• Obtaining models with high durability.
• Minimum, uniform coefficient of expansion.
• Consistent level of quality.

Physical properties:

• Hardening time: approx. 10 min.
• Compressive strength after 1 h: more than 20 N/mm sq.
• Hardness after 24 hours over 80 N/sq.
• Linear expansion after 2 hours : below 0.14%.

Mixing ratio:

• Water 100g : 30ml.
• Water: gypsum 0.3 ml/g.
• Operating temperature approx. 23 °C.

How to use:

• Fast in no more than 10 seconds. pour gypsum into water in the proportions given above and wait 20 seconds. until the water is absorbed by the gypsum.
• Mechanical mixing : 30 sec.
• Manual mixing: 60 sec.

During this time, the gypsum reaches the optimum consistency for pouring into model molds on a shaker. Shaking time: approx. 6 min

After this time, stop shaking so as not to disturb the crystallization process.

Storage :

• At least 12 months in sealed, moisture-proof packaging.

Packaging:

• 25kg.

Attention:

Due to the high weight of the goods (25 kg), an additional fee will be added to the shipment.

Gypsum class III Eco Stone 25 kg blue.

Hard, blue type 3 synthetic gypsum of high quality, intended for casting works in the technique of partial settling dentures, skeletal and orthodontic appliances. Meets the requirements of ISO 6873-3.

Eco Stone III class provides:

• Obtaining models with high durability.
• Minimum, uniform coefficient of expansion.
• Consistent level of quality.

Physical properties:

• Hardening time: approx. 10-12 min.
• Compressive strength after 1 h: more than 20 N/mm sq.
• Hardness after 24 hours over 80 N/sq
• Linear expansion after 2 hours : below 0.14%

Mixing ratio:

• Gypsum : water 100 g : 30 ml.
• Water: gypsum 0.3 ml/g.
• Operating temperature approx. 23 ° C.

How to use:

• Fast in no more than 10 seconds. pour gypsum into water in the proportions given above and wait 20 seconds. until the water is absorbed by the gypsum.

• Mechanical mixing : 30 sec.

• Manual mixing: 60 sec.

During this time, the gypsum reaches the optimum consistency for pouring into model molds on a shaker. Shaking time: approx. 6 min

After this time, stop shaking so as not to disturb the crystallization process.

Storage :

• At least 12 months in sealed, moisture-proof packaging.

Packaging:

• 25kg.

Attention:

Due to the high weight of the goods (25 kg), an additional fee will be added to the shipment.

Plaster for working models when making removable orthodontic appliances.

Characteristic:

• Low degree of linear expansion.

• Glossy white color.

• High liquidity.

Advantages:

• Smooth surface.

• Easy to prepare and process.

• Surface abrasion resistance.

parameters:

• White color
• Mixing ratio 30 ml / 100 g.
• Setting time 10 - 12 min.
• Linear expansion after 2h < 0.13%.

Packaging:

• 25 kg.

Attention:

• Due to the high weight of the goods (25 kg), an additional fee will be added to the shipment.

Description:

• Stodent III is a type 3 hard plaster recommended for antagonist models and working models in the manufacture of removable and skeletal dentures.
• Light green color enriched with mango aroma
• Small expansion
• Good mechanical properties

Benefits:

• Smooth surface
• Facilitated model making due to high thixotropy
• High breakage resistance during release from the impression

Technical data:

• Mixing ratio 30 ml / 100 g
• Mixing time (vacuum) 30 s
• Mixing time (manual) 60 – 90 sec
• Setting time 10 -14 min.
• Impression release time 45 min.
• Compressive strength (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2h ) max. 0.15% [< 0.20 %]

Packaging:

• 25 kg.