Prosthetic micromotors

What is a prosthetic micromotor for?

A prosthetic micromotor is the basic working tool of a dental technician. It is used for processing models or smoothing them. The complete micromotor consists of a motor on which the number of revolutions is set and a handpiece operated by a technician in the hand.

Division of microslinics

Due to their design, micromotors are divided into brush and brushless

Brush They are characterized by the fact that they have brushes. This is an undoubted disadvantage in relation to brushless micromotors. The disadvantage of the brushes is their abrasion and the problem with contact, which results in frequent replacement. Brush micromotors are also slower and less powerful. However, their price is often at least half the price of similar micromotors without brushes.

Brushless They are constructed in a technology where brushes are not needed for proper operation. It gives them an advantage over brushes in such categories as:

  • noise level,
  • failure-free,
  • power,
  • speed.

Product Code:: 1022
KaVo KPOWER grip prosthetic micromotor
Kavo

1,221.01€ +vat

1,501.84€ incl tax

KaVo KPOWER grip prosthetic micromotor

Best in all respects In situations where high-quality tools are required, there is no alternative to the KaVo KPOWERgrip.

The micromotor with an extremely high torque (up to 7 Ncm) guarantees full versatility of work in all conditions and with any materials.

The virtually noiseless and vibration-free operation of the induction motor promotes concentration while working. The reduced weight of the handpiece and the ultra-flexible cable allow for freedom of action when performing prosthetic works.

Particularly important: The modern grip surface, specially developed for KPOWERgrip, ensures that the handpiece is comfortable and secure in the hand.

Features:

  • 20% more efficient cooling
  • Modern construction technology guarantees reduced heating of the handpiece.
  • Reliable and stable tool holder during work.
  • A completely new coating has been developed for K-POWERgrip to facilitate proper operation.
  • More power in any situation
  • The new micromotor has increased power and torque.
  • More freedom when working

Technical data:

  • Speed range 1,000 - 50,000 rpm
  • Max torque 7 Ncm
  • Brushless DC motor drive
  • Power on the cutter 150 W

Package:

1 piece.

Product Code: 1022
Brands Kavo
KaVo KPOWER grip prosthetic micromotor

1,221.01€ +vat

1,501.84€ incl tax

Product Code:: 2584
WH Perfecta 900 LA-923 micromotor with reservoir
W&H

1,773.43€ +vat

2,181.31€ incl tax

WH Perfecta 900 LA-923 micromotor with reservoir

One machine for all materials The Perfecta 900 can be combined with a motor with a high-speed handpiece and a motor with a technical handpiece, allowing you to process all materials with just one machine.

Based on decades of experience, W&H has developed a prosthetic motor that offers the world's first integrated handpiece blowing function.

Technical data:

  • High-speed handpiece motor 0.7 Ncm, 5,000 - 100,000 rpm
  • Brushless motor
  • Rotary instrument diameters 1.6
  • Blow-out function
  • Automatic programs Bistable / Cruise control
  • Turns right and left
  • Table version with foot control / Knee version
  • External additional control (optional on the foot device)
  • 24-month warranty

Package:

  • 1 piece.

Product Code: 2584
Brands W&H
WH Perfecta 900 LA-923 micromotor with reservoir

1,773.43€ +vat

2,181.31€ incl tax

Product Code:: 2689
KAVO K-5 micromotor plus knee control
Kavo

1,060.74€ +vat

1,304.71€ incl tax

KAVO K-5 micromotor plus knee control

The new high-torque micromotor guarantees stable operation in the full speed range from 1,000 to 35,000 rpm. Effective silencing combined with other features allows to meet high requirements in the performance of prosthetic works.

The K5plus weighs only 200 g. Thanks to its ergonomic shape, ultra-thin cable and silent operation, as well as low weight, the operator is sure and comfortable to work with.

Technical data:

  • Speed range 1,000 - 35,000 rpm
  • Max torque 4.5 Ncm
  • Cutter size 2.35mm, 3.00mm, 1/8
  • Toe-in 0.02 mm
  • Cooling does not require additional cooling
  • Brushless DC motor drive
  • The shape of the handle is designed according to the principles of ergonomics

Package:

1 piece.

Product Code: 2689
Brands Kavo
KAVO K-5 micromotor plus knee control

1,060.74€ +vat

1,304.71€ incl tax

Product Code:: 3136
WH Perfecta 600 micromotor
W&H

1,556.31€ +vat

1,914.26€ incl tax

WH Perfecta 600 micromotor

Perfecta 600 micromotor A reliable engine for technicians who value perfection in their work. Quiet and vibration-free operation. Possibility of blowing the working field directly from the handpiece. 2 years warranty.

Technical data:

  • Motor with 7.8 Ncm handpiece, 1,000 - 50,000 rpm.
  • Brushless motor
  • Blow-out function
  • Turns right and left
  • Table version with foot control / Knee version / Foot version
  • External additional control (optional on the foot device).

Perfecta 600 - table version REF 14936000:

  • freely placed control device, foot controller with additional blow-off button, motor with handpiece, additional controller

Perfecta 600 - knee version REF 14936100:

  • additional controller, control device, foot controller with an additional button for air purge optional: foot controller

Perfecta 600 - foot version REF 14936200:

  • control device with an additional button for the purge function, motor with handpiece optional: additional controller

Package:

  • 1 piece

Product Code: 3136
Brands W&H
WH Perfecta 600 micromotor

1,556.31€ +vat

1,914.26€ incl tax

Product Code:: 3776
STRONG 207S / H450 micromotor [new version of the handpiece]
Saeshin

273.47€ +vat

336.37€ incl tax

STRONG 207S / H450 micromotor [new version of the handpiece]

Strong 207 prosthetic motor with a strong H450 handpiece [new type]

A universal, brush prosthetic micromotor designed to work with all materials (acrylic, metal, ceramics) under medium and low loads. Successor of the popular "Maraton N7r" type engines

Characteristics:

  • Power: 100 Watt
  • Standard micromotor with low-vibration carbon brushes.
  • 45,000 rpm
  • Torque: 6 ncm
  • Manually adjustable speed.
  • Built-in microprocessor.
  • Right / left rotation.

The switch with a foot pedal or, after mounting under the table top, also with a knee with full, smooth speed control. The switch and speed control also in the power supply on the table. 12-month warranty Compliant with European Union CE standards

Package:

  • 1 piece.

Product Code: 3776
Brands Saeshin
STRONG 207S / H450 micromotor [new version of the handpiece]

273.47€ +vat

336.37€ incl tax

Product Code:: 4012
Marathon MULTI 600 micromotor
Saeyang Microtech

613.24€ +vat

754.29€ incl tax

Marathon MULTI 600 micromotor

Speed:

  • smooth speed regulation in the entire range
  • high torque
  • precise micro-machining

Low vibration and noise:

  • hermetic housing reduces the noise level by 20%
  • no brushes required
  • produces less vibration than brush motors

High durability:

  • built-in anti-dust protection system that increases the service life of the device and prevents micro-particles of dust and other contaminants from entering the front bearings
  • trouble-free operation

Ergonomic design:

  • increases the comfort of work and reduces hand fatigue during long-term work

Self-diagnosis function:

  • the built-in microcomputer has a function in the control system that monitors the correct operation of the system
  • indicates the need for maintenance
  • in an emergency, it locates the hazardous area and displays the error code

"Auto Cruise" function - allows you to remember the desired speed in advance - relieves the foot - maintains the desired level of revolutions

The warranty does not cover: bearings and electric cables.

Brushless micromotor:

  • speed 1000-50000 rpm,
  • max power 230 W,
  • torque 7.8 Ncm,
  • weight 238 g,
  • cable length 1.5 m.

Product Code: 4012
Marathon MULTI 600 micromotor

613.24€ +vat

754.29€ incl tax

Product Code:: 4192
Marathon N7 R micromotor
Saeyang Microtech

223.75€ +vat

275.21€ incl tax

Marathon N7 R micromotor

New model of the micromotor. Revised power supply that can be placed vertically or horizontally. Changed handpiece housing. The micromotor is additionally sealed against dirt inside. Additional micromotor holder. Controlled by "soft buttons".

Technical data:

  • 100W power
  • Maximum speed of 40,000 revolutions
  • Total length of the micromotor 152mm.
  • The maximum diameter of the handle is 29mm.
  • Power 240V / 50Hz
  • Ergonomic housing
  • Right and left rotation
  • Switch with a foot pedal or, after mounting under the table top, also with a knee with full, smooth speed control.
  • The switch and speed control also in the power supply on the table.
  • Warranty 12 months
  • Compliant with European Union CE standards

Package; 1 piece.

Product Code: 4192
Marathon N7 R micromotor

223.75€ +vat

275.21€ incl tax

Product Code:: 4415
Drill clamp 2.35 NSK
Nsk

24.85€ +vat33.23€

30.57€ incl tax

Drill clamp 2.35 NSK

Collet for NSK micromotors - diameter 2.35mm

Package:

  • 1 piece

Product Code: 4415
Brands Nsk
Drill clamp 2.35 NSK

24.85€ +vat33.23€

30.57€ incl tax

Product Code:: 4566
KaVo K-ERGOgrip micromotor - foot control -
Kavo

1,272.06€ +vat

1,564.63€ incl tax

KaVo K-ERGOgrip micromotor - foot control -

Ergonomic grip geometry adapted to the position of the hand and arm

Four programs for speed and torque setting

For all types of work

Same speed for right / left rotation

New clamping system with high holding force and the possibility of changing the clamp without tools

KaVo KERGOgrip technical data:

Important technical data (with K-Control TLC.)

  • Revolutions: 1,000- 50,000 rpm
  • Max. Torque: 7 Ncm
  • Power on the cutter: 160 W
  • Motor: Brushless
  • Chuck: 2.35mm 3.00mm
  • Length: 140 mm
  • Housing: ergonomic or simple (two included)

Package:

1 piece.

Product Code: 4566
Brands Kavo
KaVo K-ERGOgrip micromotor - foot control -

1,272.06€ +vat

1,564.63€ incl tax

Product Code:: 4900
Strong Forte 200 micromotor - New - with ceramic bearings
Saeshin

469.38€ +vat

577.33€ incl tax

Strong Forte 200 micromotor - New - with ceramic bearings

The Saeshin Strong Forte 200 prosthetic micromotor. The brushless micromotor, high speed control function (up to 50,000 rpm), and high power minimize vibrations, providing sufficient power even at low speeds.

Features:

  • Knee type.
  • Ergonomic.
  • Excellent durability.
  • Minimal noise and vibration.
  • Maximum efficiency.
  • Built-in microprocessor (self-diagnosis, error signaling, working memory storage and handpiece auto-recognition functions.
  • Right / left rotation of the micromotor.
  • 50,000 rpm
  • Max torque: 7.8N.cm.
  • Power 230W.

Package:

1 piece

Product Code: 4900
Brands Saeshin
Strong Forte 200 micromotor - New - with ceramic bearings

469.38€ +vat

577.33€ incl tax

Product Code:: 5771
KAVO K-5 micromotor plus table controller
Kavo

1,060.74€ +vat

1,304.71€ incl tax

KAVO K-5 micromotor plus table controller

The new high-torque micromotor guarantees stable operation in the full speed range from 1,000 to 35,000 rpm. Effective silencing combined with other features allows to meet high requirements in the performance of prosthetic works.

The K5plus weighs only 200 g. Thanks to its ergonomic shape, ultra-thin cable and silent operation, as well as low weight, the operator is sure and comfortable to work with.

Technical data:

  • Speed range 1,000 - 35,000 rpm
  • Max torque 4.5 Ncm
  • Cutter size 2.35mm, 3.00mm, 1/8
  • Toe-in 0.02 mm
  • Cooling does not require additional cooling
  • Brushless DC motor drive
  • The shape of the handle is designed according to the principles of ergonomics

Package:

1 piece.

Product Code: 5771
Brands Kavo
KAVO K-5 micromotor plus table controller

1,060.74€ +vat

1,304.71€ incl tax

Product Code:: 6741
STRONG 204 micromotor
Saeshin

82.70€ +vat

101.73€ incl tax

STRONG 204 micromotor

Strong 204 micromotor

Advantages:

  • Brush micromotor
  • The set includes: control base, handpiece, foot controller, handpiece support
  • Direction of rotation switch
  • Vibration reduction mechanism
  • For light work in acrylic and porcelain
  • RPM: max. 35,000 minutes - 1
  • power about 65 W
  • very precise speed control
  • vibration reduced to a minimum
  • very quiet
  • high quality
  • very easy to use
  • foot switch
  • switch and speed control in the power supply
  • rotation direction switch - right / left
  • Main unit power supply AC 240V5- 0/60 Hz
  • Nominal (maximum) load current 3A

Package:

1zt.

Product Code: 6741
Brands Saeshin
STRONG 204 micromotor

82.70€ +vat

101.73€ incl tax

Product Code:: 6742
Strong Forte 400S micromotor with load display
Saeshin

570.15€ +vat

701.28€ incl tax

Strong Forte 400S micromotor with load display

Advantages:

  • Saeshin's newest and most advanced engine. Brushless micromotor with a lightweight SLIM handpiece (only 200g!), High speed control function (up to 50,000 rpm), and high power minimize vibrations, providing sufficient power even at low speeds.

  • Bearings of the renowned German company GRW.

  • The device is equipped with a load display, thanks to which the operator has full control over the regulation of the device load. In practice, this function significantly extends the life of the machine.

  • In addition, Strong Forte 400S is equipped with a control pedal with a magnetic sensor, which is definitely more precise than competing ones available on the market.

WARRANTY:

  • 3-year full warranty with "door to door" service and a replacement device.

Features:

  • Table type.
  • Ergonomic.
  • Excellent durability.
  • Minimal noise and vibration.
  • Maximum efficiency.
  • Built-in microprocessor (self-diagnosis, error signaling, working memory storage and handpiece auto-recognition functions.
  • Right / left rotation of the micromotor.
  • 50,000 rpm
  • Max torque: 6.5N.cm.
  • Power 230W.

Package:

1 piece

Product Code: 6742
Brands Saeshin
Strong Forte 400S micromotor with load display

570.15€ +vat

701.28€ incl tax

Product Code:: 6877
Marathon N7 micromotor
Saeyang Microtech

208.77€ +vat273.17€

256.78€ incl tax

Marathon N7 micromotor

N7 micromotor

Features:

  • easy to use - easy to change the direction of work
  • smooth speed change
  • adjustment with knob and foot pedal
  • quiet while working
  • does not emit heat during prolonged operation
  • foot switch / switch
  • ergonomic shape of the handle reduces hand fatigue during work.

Technical data:

  • Turnover 35,000 rpm.
  • Power - 90W.
  • Torque 4Ncm.
  • Handpiece weight 200g.

Packaging:

1 piece.

Product Code: 6877
Marathon N7 micromotor

208.77€ +vat273.17€

256.78€ incl tax

Product Code:: 7483
KAVO K-5 Plus micromotor foot controller
Kavo

1,060.74€ +vat

1,304.71€ incl tax

KAVO K-5 Plus micromotor foot controller

The new high-torque micromotor guarantees stable operation in the full speed range from 1,000 to 35,000 rpm. Effective silencing combined with other features allows to meet high requirements in the performance of prosthetic works.

The K5plus weighs only 200 g. Thanks to its ergonomic shape, ultra-thin cable and silent operation, as well as low weight, the operator is sure and comfortable to work with.

Technical data:

  • Speed range 1,000 - 35,000 rpm
  • Max torque 4.5 Ncm
  • Cutter size 2.35mm, 3.00mm, 1/8
  • Toe-in 0.02 mm
  • Cooling does not require additional cooling
  • Brushless DC motor drive
  • The shape of the handle is designed according to the principles of ergonomics

Package:

1 piece.

Product Code: 7483
Brands Kavo
KAVO K-5 Plus micromotor foot controller

1,060.74€ +vat

1,304.71€ incl tax

Product Code:: 7906
Prosthetic micromotor NSK Ultimate XL-GT Table
Nsk

845.28€ +vat

1,039.69€ incl tax

Prosthetic micromotor NSK Ultimate XL-GT Table

NSK Ultimate micromotor Table controller, universal motor for all prosthetic work, self-diagnosis function, comfortable and lightweight handpiece

Technical data:

  • brushless,
  • power 250W,
  • 50,000 rpm,
  • max. torque of 8.7N / cm

Package; 1 piece.

Product Code: 7906
Brands Nsk
Prosthetic micromotor NSK Ultimate XL-GT Table

845.28€ +vat

1,039.69€ incl tax

Product Code:: 7977
Strong 210 35K micromotor
Saeshin

107.73€ +vat

132.51€ incl tax

Strong 210 35K micromotor

Strong 210 micromotor

Technical data:

  • rotational speed - 0-35,000 rpm
  • smooth speed setting (potentiometer)
  • foot switch and switch
  • very easy to use
  • 1 year warranty
  • set of spare brushes included
  • weight about 1.3 kg
  • dimensions 140 x 132 x 86 mm.

Possibility to place 18 cutters on the unicie.

Package:

1 piece.

Product Code: 7977
Brands Saeshin
Strong 210 35K micromotor

107.73€ +vat

132.51€ incl tax

Product Code:: 8005
Strong B350 micromotor
Saeshin

96.96€ +vat132.51€

119.26€ incl tax

Strong B350 micromotor

Strong B350 / H350 brush micromotor

Advantages:

  • compact size
  • handpiece holder
  • 8 cutter holes
  • foot and hand control
  • turnover max 40,000 / min
  • right and left rotation
  • quiet handpiece and low vibration
  • one year warranty.

Package:

  • 1 piece

Product Code: 8005
Brands Saeshin
Strong B350 micromotor

96.96€ +vat132.51€

119.26€ incl tax

Product Code:: 8245
NSK Ultimate XL- KT Knee micromotor Promotion
Nsk

845.28€ +vat

1,039.69€ incl tax

NSK Ultimate XL- KT Knee micromotor Promotion

500K - knee steering

ULTIMATE 500 are small size prosthetic motors, lightweight, designed for direct setting anywhere on the work table or under it.

Technical data of the CONTROLLER:

  • Speed - 1000 - 50000 rpm
  • Power supply - alternating current 120V / 230V 50-60Hz
  • Frequency - 28- 32kHz
  • Dimensions - W 98mm x D 270mm x H 230mm
  • Weight - 3.0 kg
  • Color - light gray

Technical data of the RECTIFIER UM50T:

  • Speed - 1000 - 50000rpm
  • Maximum power - 250W
  • Maximum torque - 8.7Ncm
  • Dimensions - Length 164mm x circumference 29mm
  • Weight with the cable - 230g
  • Cable length - 1.2 m

Package:

1 piece

Product Code: 8245
Brands Nsk
NSK Ultimate XL- KT Knee micromotor Promotion

845.28€ +vat

1,039.69€ incl tax

Product Code:: 8525
Kavo drill clamp 2.35mm
Kavo

47.57€ +vat

58.51€ incl tax

Kavo drill clamp 2.35mm

Drill clamp for KAVO micromotor. (For K4, K4plus, K5, K5plus, K12, K-Powergrip.)

Package:

  • 1 piece

Product Code: 8525
Brands Kavo
Kavo drill clamp 2.35mm

47.57€ +vat

58.51€ incl tax

Product Code:: 15291
W&H Perfecta 300 micromotor
W&H

1,191.68€ +vat

1,465.76€ incl tax

W&H Perfecta 300 micromotor

Perfect control Based on many years of experience, W&H has developed the Perfecta 300 and Perfecta 600 - depending on your needs in table, foot or knee versions.

Benefits:

  • The efficient handpiece
  • Convenient operation - a choice of three control options
  • Facilitated work thanks to automatic programs
  • »E-type« engine with ISO connection (Perfecta 300 only)
  • 24-month warranty

Technical data:

  • Perfecta 300
  • Motor with 5.5 Ncm handpiece 1.000 - 40.000 rpm.
  • Brushless motor
  • Milling cutters with a diameter of 2.35 mm
  • Option: »E-Type« engine with ISO connection
  • Automatic Bistable program
  • Turns right / left

Perfecta 300 - table version REF 14933000:

  • freely placed control device,
  • foot controller, motor with handpiece, additional controller

Perfecta 300 - knee version REF 14933100:

  • control device, motor with handpiece, additional controller
  • optional: foot control

Perfecta 300 - foot version REF 14933200:

  • motor with handpiece, control device
  • optional: additional driver

Package:

  • 1 piece

Product Code: 15291
Brands W&H
W&H Perfecta 300 micromotor

1,191.68€ +vat

1,465.76€ incl tax

Product Code:: 16123
TRAUS B150 micromotor
Saeshin

328.17€ +vat448.49€

403.65€ incl tax

TRAUS B150 micromotor

Prosthetic micromotor Saeshin TRAUS B150. A table-top micromotor with an additional foot pedal. One of the strongest high-torque handpieces on the market, it is suitable for the processing of any material: metal, ceramics, acrylic, thermoplastics.

Benefits:

  • Minimal noise and vibration.
  • Max torque: 7.8N.cm.
  • Hand and foot control
  • Maximum efficiency.
  • Overload protection function
  • Right / left rotation of the micromotor.
  • 50,000 rpm

Package:

  • 1 piece

Product Code: 16123
Brands Saeshin
TRAUS B150 micromotor

328.17€ +vat448.49€

403.65€ incl tax

Showing 1 to 22 of 22 (1 Pages)