Philips ZOOM EVA whitening foils 127x127mm 12pcs

Whitening tray foils.

Description:

• square 127x127mm;
• soft;
• thickness 1.0mm;

Packaging:

• 12pcs.

Erkoflex foil ⌀ 125mm x 1.5mm 10 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• round, diameter 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkodur foil ⌀ 120mm x 0.6mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 0.6mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkodur foil ⌀ 120mm x 1.0mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 1.0 mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkodur foil ⌀ 120mm x 0.8mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 0.8mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkoflex foil ⌀ 120mm x 4.0mm 50 pieces

For making positioners, for duplicating training models, splints for athletes.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 4.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkoflex foil ■ 125mm x 125mm x 1.5mm 10 pieces

For making whitening and fluoridation splints, bite splints, protective splints (radiological guards), transfer splints for orthodontic brackets, positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• square 12xmm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil Ø 120mm x 1.0mm 100 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected with heat.

Packaging:

• 100pcs.

Compressed sponge eraser - medium-grained gray

Sponge eraser for working with thermoplastic materials, medium-grained.

The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.

The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.

Characteristics:

• recommended operating speed - min. 6000 - max. 20000 rpm.
• diameter - 26 mm.

Packaging:

• 1pc.

Compressed sponge eraser - soft black

Sponge eraser for working with thermoplastic materials, fine-grained.

The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.

The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.

Characteristics:

• recommended operating speed - min. 6000 - max. 20000 rpm.
• diameter - 26 mm.

Packaging:

• 1pc.

Compressed sponge eraser - ultra-delicate red

Sponge eraser for working with thermoplastic materials, very fine-grained.

The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.

The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.

Characteristics:

• recommended operating speed - min. 6000 - max. 20000 rpm.
• diameter - 26 mm.

Packaging:

• 1pc.

Sponge eraser - medium-grained gray

Sponge eraser for working with thermoplastic materials, medium-grained.

The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.

The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.

Characteristics:

• recommended operating speed - min. 6000 - max. 20000 rpm.
• diameter - 26 mm.

Packaging:

• 1pc.

Sponge eraser - soft black

Sponge eraser for working with thermoplastic materials, fine-grained.

The scotch brite sponge material is embedded in rubber with appropriate abrasion resistance, which significantly extends its durability.

The flexibility of the rubber combined with the scotch brite material allows for very precise and long-lasting polishing of these difficult materials.

Characteristics:

• recommended operating speed - min. 6000 - max. 20000 rpm;
• diameter - 26 mm.

Packaging:

• 1pc.

Erkoloc-Pro round foil Ø 120mm x 1.3mm 20 pieces

Erkoloc PRO foil 120x1.3mm.

Two-layer plate, soft/hard for comfortable bite splints, miniplastic and anti-grinding splints.

Characteristics:

• round Ø 120mm thickness 1.3mm;
• soft-hard;
• the hard layer is made of polyethylene terephthalate glycol (PETG) and can be combined with an autopolymerizer;
• the soft side is made of thermoplastic polyurethane (TPU);
• the outer surface is hard and easy to process, can be sanded or built up with a quick polymer.

Packaging:

• 20pcs

Erkoflex foil Ø 125 mm x 2.0 mm 10 pieces

For making splints, for duplicating demonstration models, for making protective splints (radiological protectors), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• round, diameter 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex Bleach foil Ø 120mm x 1.0mm 20 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• round, diameter 120 mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected with heat.

Packaging:

• 20pcs.

Erkoflex foil Ø 120mm x 2.0mm 50 pieces

For making splints for duplicating demonstration models, making protective splints (radiological protectors), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

B-Form GRAMINOX granulate for molders 480g

Stainless steel granules for B-Form vacuum forming machines.

Characteristics:

• Adjusting the model's height: you can "sink" the model into the beads to the desired depth. This will ensure the foil adheres only to the line you define;
• the granulate prevents the formation of unwanted foil folds around the base of the model, which is common when forming without granulate;
• stabilizes the model: thanks to the large mass of the balls, the model does not move during the suction (vacuum) process;
• ball diameter approx. 1.2 mm – 1.5 mm.

Packaging:

• 1 pc.

Folia Erkolen Ø 120mm x 1,0mm 20szt

Folia Erkolen 1,0mm.

Cechy:

• Średnica 120mm.
• Spalają się bez pozostałości.

Do wykonywania:

• Prowizorkek koron i mostów.
• Utrzymywaczy przestrzeni dla żelowatych środków terapeutycznych.

Opakowanie:

• 20szt.

Block Out Resin 1.2ml 1 pc.

Ultradent LC Block-Out Resin is used to create gel reservoirs in whitening trays and is useful for other laboratory work, such as model repairs.

Application of Ultradent LC Block-Out Resin with the Black Mini Tip is quick and effective.

Characteristics:

• light curing is necessary;
• The resin is not intended for use in the oral cavity.

Use:

• To form the gel reservoirs, apply approximately 0.5 mm of Ultradent LC Block-Out resin to the labial surfaces, remaining approximately 1.5 mm from the gum line, and light cure.
• do not go beyond the incisal edges or chewing surfaces.

Packaging:

• 1.2 ml syringe.

B-Form Ghost Aligner Foils 125mmx125mm x 1.0mm 20pcs

Ghost Aligner, a thermoplastic plate for making orthodontic aligners, made of a special, transparent and flexible compound.

This specificity provides the orthodontist with significant benefits because it allows for a more precise fit, thus improving control over tooth movement.

Characteristics:

• square;
• 125mmx125mm;
• thickness 1.0mm;
• three-layer aluminum envelope protects the product from light and moisture.

Perfect fit and precision:

• the high flexibility of GHOST ALIGNER® optimizes the adjustment of the aligner to the morphology of the teeth, brackets (attachments) and interdental spaces, allowing for excellent results;
• A better fit provides a more stable point of contact, which helps maintain a constant force and therefore precise tooth movement.

Advanced polyurethane technology:

• GHOST ALIGNER® overlays fully utilize the technology and physical and mechanical properties of a special polyurethane mixture;
• This makes them much more effective and efficient than those made from older generation materials, such as pure PET-G.

Patient comfort:

• GHOST ALIGNER® aligners are comfortable to wear and remove thanks to greater flexibility;
• do not negatively affect speech;
• The process of putting them on and taking them off is extremely easy, and patients do not feel any discomfort in the gums and teeth.

Protection and aesthetics:

• GHOST ALIGNER® is coated on both sides with a very thin (20 microns) thermoplastic protective film;
• it can be removed after the thermoforming process, thanks to which the disc retains its original translucency and shine, avoiding dulling caused by the porous surface of 3D resin models.

Packaging:

• 20 pcs.

Erkoflex foil ■ 125mm x 125mm x 2.0mm 10 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil Ø 120mm x 3.0mm 10 pieces

For making positioners, for duplicating training models, splints for athletes, protective splints (radiological protectors).

Characteristics:

• soft, Shore A hardness: 82;
• thickness 3.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

DFS Synthetic Brush for Polishing Plastic 10 Pieces

Flexible synthetic fiber brushes (FLEECETECH) impregnated with abrasive material for processing and smoothing soft materials, plastics and thermoformable splints.

Characteristics:

• diameter: 26mm;
• recommended speed: 5-10000 rpm.
• assembly: the brushes are factory-mounted on the holder and centered, which ensures stable operation without wobbling.

Available in 3 grades:

• yellow - coarse;
• green color - medium;
• purple color - fine.

Packaging:

• 10 pcs.

Erkoflex foil ■ 125mm x 125mm x 3.0mm 10 pieces

For making positioners, for duplicating training models, splints for athletes, protective splints (radiological protectors).

Characteristics:

• soft, Shore A hardness: 82;
• thickness 3.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil Ø 120mm x 2.0mm 10 pieces

For making splints, for duplicating demonstration models, for making protective splints (radiological protectors), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• round, diameter 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkoflex foil Ø 120mm x 3.0mm 50 pieces

For making positioners, for duplicating training models, splints for athletes, protective splints (radiological protectors).

Characteristics:

• soft, Shore A hardness: 82;
• thickness 3.0mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkodur foil Ø 120mm x 0.5mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 0.5mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkoflex Bleach foil Ø 120mm x 1.0mm 100 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• round, diameter 120 mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 100pcs.

Erkodur foil Ø 120mm x 1.5mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 1.5mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

Erkodur foil Ø 120mm x 2.0mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 2.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

B-Form Ghost Aligner Foils 120mm 0.5mm 20pcs

Ghost Aligner, a thermoplastic plate for making orthodontic aligners, made of a special, transparent and flexible compound.

This specificity provides the orthodontist with significant benefits because it allows for a more precise fit, thus improving control over tooth movement.

Characteristics:

• round;
• diameter 120mm;
• thickness 0.5mm;
• three-layer aluminum envelope protects the product from light and moisture.

Perfect fit and precision:

• the high flexibility of GHOST ALIGNER® optimizes the adjustment of the aligner to the morphology of the teeth, brackets (attachments) and interdental spaces, allowing for excellent results;
• A better fit provides a more stable point of contact, which helps maintain a constant force and therefore precise tooth movement.

Advanced polyurethane technology:

• GHOST ALIGNER® overlays fully utilize the technology and physical and mechanical properties of a special polyurethane mixture;
• This makes them much more effective and efficient than those made from older generation materials, such as pure PET-G.

Patient comfort:

• GHOST ALIGNER® aligners are comfortable to wear and remove thanks to greater flexibility;
• do not negatively affect speech;
• The process of putting them on and taking them off is extremely easy, and patients do not feel any discomfort in the gums and teeth.

Protection and aesthetics:

• GHOST ALIGNER® is coated on both sides with a very thin (20 microns) thermoplastic protective film;
• it can be removed after the thermoforming process, thanks to which the disc retains its original translucency and shine, avoiding dulling caused by the porous surface of 3D resin models.

Packaging:

• 20 pcs.

B-Form Ghost Aligner Foils 120mm 0.75mm 20pcs

Ghost Aligner, a thermoplastic plate for making orthodontic aligners, made of a special, transparent and flexible compound.

This specificity provides the orthodontist with significant benefits because it allows for a more precise fit, thus improving control over tooth movement.

Characteristics:

• round;
• diameter 120mm;
• thickness 0.75mm;
• three-layer aluminum envelope protects the product from light and moisture.

Perfect fit and precision:

• the high flexibility of GHOST ALIGNER® optimizes the adjustment of the aligner to the morphology of the teeth, brackets (attachments) and interdental spaces, allowing for excellent results;
• A better fit provides a more stable point of contact, which helps maintain a constant force and therefore precise tooth movement.

Advanced polyurethane technology:

• GHOST ALIGNER® overlays fully utilize the technology and physical and mechanical properties of a special polyurethane mixture;
• This makes them much more effective and efficient than those made from older generation materials, such as pure PET-G.

Patient comfort:

• GHOST ALIGNER® aligners are comfortable to wear and remove thanks to greater flexibility;
• do not negatively affect speech;
• The process of putting them on and taking them off is extremely easy, and patients do not feel any discomfort in the gums and teeth.

Protection and aesthetics:

• GHOST ALIGNER® is coated on both sides with a very thin (20 microns) thermoplastic protective film;
• it can be removed after the thermoforming process, thanks to which the disc retains its original translucency and shine, avoiding dulling caused by the porous surface of 3D resin models.

Packaging:

• 20 pcs.

B-Form Ghost Aligner Foils 120mm 1.0mm 20pcs

Ghost Aligner, a thermoplastic plate for making orthodontic aligners, made of a special, transparent and flexible compound.

This specificity provides the orthodontist with significant benefits because it allows for a more precise fit, thus improving control over tooth movement.

Characteristics:

• round;
• diameter 120mm;
• thickness 1.0mm;
• three-layer aluminum envelope protects the product from light and moisture.

Perfect fit and precision:

• the high flexibility of GHOST ALIGNER® optimizes the adjustment of the aligner to the morphology of the teeth, brackets (attachments) and interdental spaces, allowing for excellent results;
• A better fit provides a more stable point of contact, which helps maintain a constant force and therefore precise tooth movement.

Advanced polyurethane technology:

• GHOST ALIGNER® overlays fully utilize the technology and physical and mechanical properties of a special polyurethane mixture;
• This makes them much more effective and efficient than those made from older generation materials, such as pure PET-G.

Patient comfort:

• GHOST ALIGNER® aligners are comfortable to wear and remove thanks to greater flexibility;
• do not negatively affect speech;
• The process of putting them on and taking them off is extremely easy, and patients do not feel any discomfort in the gums and teeth.

Protection and aesthetics:

• GHOST ALIGNER® is coated on both sides with a very thin (20 microns) thermoplastic protective film;
• it can be removed after the thermoforming process, thanks to which the disc retains its original translucency and shine, avoiding dullness caused by the porous surface of 3D resin models.

Packaging:

• 20 pcs.

B-Form Ghost Aligner Foils 125mm 0.5mm 20pcs

Ghost Aligner, a thermoplastic plate for making orthodontic aligners, made of a special, transparent and flexible compound.

This specificity provides the orthodontist with significant benefits because it allows for a more precise fit, thus improving control over tooth movement.

Characteristics:

• round;
• diameter 125mm;
• thickness 0.5mm;
• three-layer aluminum envelope protects the product from light and moisture.

Perfect fit and precision:

• the high flexibility of GHOST ALIGNER® optimizes the adjustment of the aligner to the morphology of the teeth, brackets (attachments) and interdental spaces, allowing for excellent results;
• A better fit provides a more stable point of contact, which helps maintain a constant force and therefore precise tooth movement.

Advanced polyurethane technology:

• GHOST ALIGNER® overlays fully utilize the technology and physical and mechanical properties of a special polyurethane mixture;
• This makes them much more effective and efficient than those made from older generation materials, such as pure PET-G.

Patient comfort:

• GHOST ALIGNER® aligners are comfortable to wear and remove thanks to greater flexibility;
• do not negatively affect speech;
• The process of putting them on and taking them off is extremely easy, and patients do not feel any discomfort in the gums and teeth.

Protection and aesthetics:

• GHOST ALIGNER® is coated on both sides with a very thin (20 microns) thermoplastic protective film;
• it can be removed after the thermoforming process, thanks to which the disc retains its original translucency and shine, avoiding dulling caused by the porous surface of 3D resin models.

Packaging:

• 20 pcs.

B-Form Ghost Aligner Foils 125mm 0.75mm 20pcs

Ghost Aligner, a thermoplastic plate for making orthodontic aligners, made of a special, transparent and flexible compound.

This specificity provides the orthodontist with significant benefits because it allows for a more precise fit, thus improving control over tooth movement.

Characteristics:

• round;
• diameter 125mm;
• thickness 0.75mm;
• three-layer aluminum envelope protects the product from light and moisture.

Perfect fit and precision:

• the high flexibility of GHOST ALIGNER® optimizes the adjustment of the aligner to the morphology of the teeth, brackets (attachments) and interdental spaces, allowing for excellent results;
• A better fit provides a more stable point of contact, which helps maintain a constant force and therefore precise tooth movement.

Advanced polyurethane technology:

• GHOST ALIGNER® overlays fully utilize the technology and physical and mechanical properties of a special polyurethane mixture;
• This makes them much more effective and efficient than those made from older generation materials, such as pure PET-G.

Patient comfort:

• GHOST ALIGNER® aligners are comfortable to wear and remove thanks to greater flexibility;
• do not negatively affect speech;
• The process of putting them on and taking them off is extremely easy, and patients do not feel any discomfort in the gums and teeth.

Protection and aesthetics:

• GHOST ALIGNER® is coated on both sides with a very thin (20 microns) thermoplastic protective film;
• it can be removed after the thermoforming process, thanks to which the disc retains its original translucency and shine, avoiding dulling caused by the porous surface of 3D resin models.

Packaging:

• 20 pcs.

Erkoflex foil Ø 120mm x 1.5mm 50 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

B-Form Smart seal for Splint foil 3 pieces

An intelligent locking system designed to tightly secure the aluminum protective envelopes containing the B-FORM Splint inserts after they have been opened for the first time.

Characteristics:

• seal length 19 cm;
• protection: provides 100% protection against external moisture;
• Compatibility: fits all tile envelopes up to 17 cm wide.

Packaging:

• 1 package/3 pieces

Granules for Erkoform 1.3 kg

Granules for the Erkoform pressing device.

Packaging:

• 1 piece.

B-Form Smart seal for Ghost aligner foil 3 pieces

An intelligent locking system designed to tightly secure the aluminum protective envelopes containing the Ghost Aligner® inserts after they have been opened for the first time.

Characteristics:

• seal length 23 cm;
• protection: provides 100% protection against external moisture;
• Compatibility: fits all tile envelopes up to 21 cm wide.

Packaging:

• 1 package/3 pieces

Erkoflex foil Ø 120mm x 1.5mm 10 pieces

For making splints for whitening, fluoridation, for duplicating demonstration models, making protective splints (radiological guards), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 1.5mm;
• round, diameter 120mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 10pcs.

Erkodur foil Ø 120mm x 3.0mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• round ⌀ 120 mm;
• thickness 3.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.

Erkoflex Bleach foil ■ 125mm x 125mm x 1.0mm 100 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• square 125mm x 125mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected with heat.

Packaging:

• 100pcs.

Lisko-S polishing discs for plastic 10 pieces

Polishing discs for plastic.

The material from which they are made is characterized by high durability.

Perfect for processing hard and soft foils such as erkoflex or erkodur.

Characteristics:

• turquoise color;
• fine-grained;
• disc diameter 28 mm;
• thickness about 2 - 3 mm;
• for mounting on a 2.35 mm thick mandrel;
• speed range 5,000 - 10,000 rpm;
• It is recommended to wear protective glasses when working with Lisko discs.

Packaging:

• 10 pcs. Lisko S shields.
• 1 pc. 2.35mm pin.
• 4 pcs. support discs.

Erkoflex foil ■ 125mm x 125mm x 3.0mm 50 pieces

For making positioners, for duplicating training models, splints for athletes, protective splints (radiological protectors).

Characteristics:

• soft, Shore A hardness: 82;
• thickness 3.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkoflex foil ■ 125mm x 125mm x2.0mm 50 pieces

For making splints, for duplicating demonstration models, for making protective splints (radiological protectors), splints for transferring orthodontic brackets and positioners.

Characteristics:

• soft, Shore A hardness: 82;
• thickness 2.0mm;
• square 125mm x 125mm;
• made of ethylene vinyl acetate (EVA);
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 50pcs.

Erkoflex Bleach foil ■ 125mm x 125mm x 1.0mm 20 pieces

For making splints for overlay teeth whitening, fluoridation and other drug carriers.

Characteristics:

• soft and flexible 92 shore A;
• square 125mm x 125mm;
• thickness 1.0mm;
• made of ethylene vinyl acetate (EVA),
• with insulating foil;
• does not combine with acrylic, can be corrected by heat.

Packaging:

• 20pcs.

Erkoloc PRO foil ■ 125mm x 125mm x 3.0mm 10 pieces

Erkoloc PRO foil 125x125x3.0mm.

Two-layer, soft/hard plate for comfortable, mini-plastic and anti-grinding bite splints.

Characteristics:

• Square 125mmx125mm.
• Soft-hard.
• The hard layer is made of polyethylene terephthalate-glycol (PETG) and can be combined with an autopolymerizer.
• The soft side is made of thermoplastic polyurethane (TPU).
• The outer surface is hard and easy to process, it can be sanded or built up with a quick polymer.

Packaging:

• 10 pcs

Erkodur foil ■ 125mm x 125mm x 1.0mm 20 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• square 125x125 mm;
• thickness 1.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 20 pcs.

Erkodur foil ■ 125mm x 125mm x 2.0mm 10 pieces

For the production of bite splints, molded components, caps, bruxism splints, Michigan splints, stabilization splints, temporary appliances, Silensor®-sl, dressing plates, planning and X-ray templates, protective splints, correction splints, overlays and retainers.

Characteristics:

• square 125x125 mm;
• thickness 2.0mm;
• very durable, hard material;
• burns without residue;
• bonds with acrylic;
• does not require pre-drying;
• transparent;
• with insulating foil;
• medical device class IIa;
• made of polyethylene terephthalate glycol (PETG).

Technical data (~):

• density 1.27 g/cm3;
• modulus of elasticity 2200 MPa;
• elongation at break 40%;
• bending strength 69 MPa;
• water absorption 0.2%;
• temperature resistance 63°C.

Packaging:

• 10 pcs.