Triplex Hot monomer 500ml
Triplex Hot monomer.
Acrylic fluid for hot polymerization.
Packaging:
- 500ml
ProBase Hot polymer PinkV pink with veins 500g
ProBase Hot is an acrylic material that polymerizes at elevated temperatures.
Introduces a new quality standard for removable dentures made using the flask technique.
The physical and mechanical properties of the material guarantee ease and reliability of work regardless of the chosen polymerization technique.
Characteristics:
- Ease of use;
- Shape and color stability;
- Fine-grained structure;
- Several polymerization methods;
- No cadmium in the dye;
- Compliance with EN ISO 1567.
Indications :
- Complete dentures;
- Partial dentures;
- Combined dentures.
Packaging:
- 500g
ProBase Cold polymer 500g
ProBase Cold is a self-polymerizing acrylic material.
ProBase Cold dentures can be manufactured using two different techniques - pouring and applying.
In both cases, work of the highest quality is obtained.
Characteristics:
- Ease of working with the material;
- Constancy of shape and color;
- Two work techniques;
- No cadmium in the dye;
- Compliance with EN ISO 1567.
Indications:
- Complete dentures;
- Partial dentures;
- Relining of dentures;
- Repairs.
Packaging:
- 500g
Triplex Cold polymer PV 500 g
Triplex Cold powder, a cold polymerizing acrylic material.
Characteristics:
- Designed for making dentures using the pouring technique and repairs;
- Polymerization should take place in a pressure apparatus for 15 minutes at a temperature of 40 °C and a pressure of 2-6 bar;
- Color PV pink with veins.
Indications:
- Partial dentures;
- Combined dentures;
- Repairs;
- Relining.
Packaging:
- 500g
Vertex RS Rapid Simplified monomer 250ml
Vertex Rapid Simplified, acrylic fluid for heat polymerization.
Packaging:
- 250ml
Vertex Castapress monomer 250ml
Vertex Castapress acrylic fluid for cold polymerization.
Packaging:
- 250ml
Vertex RS Rapid Simplified polymer 1000g
Vertex Rapid Simplified acrylic for making full and partial dentures.
Characteristics:
- color 4: colorless;
- color 10: transparent pink with veins;
- for hot polymerization;
- Accelerated (20 min) or traditional polymerization can be used.
Application:
- complete dentures;
- partial dentures.
Technical specifications:
- dough phase 15 minutes;
- working time 30 minutes;
- curing time 20 minutes at 100°C;
- mixing ratio by volume 1 ml / 0.95 g liquid (monomer) 2.3 g powder (polymer);
- impact resistance 11.3 kJ/m²;
- bending strength ≥ 65 MPa;
- modulus of elasticity in bending ≥ 2000 MPa;
- water sorption ≤ 32 μg/mm³;
- solubility ≤ 1.6 µg/mm³.
Packaging:
- 1000g
Vertex RS Rapid Simplified polymer 500g
Vertex Rapid Simplified acrylic for making full and partial dentures.
Characteristics:
- color 4: colorless;
- color 10: transparent pink with veins;
- for hot polymerization;
- Accelerated (20 min) or traditional polymerization can be used.
Application:
- complete dentures;
- partial dentures.
Technical specifications:
- dough phase 15 minutes;
- working time 30 minutes;
- curing time 20 minutes at 100°C;
- mixing ratio by volume 1 ml / 0.95 g liquid (monomer) 2.3 g powder (polymer);
- impact resistance 11.3 kJ/m²;
- bending strength ≥ 65 MPa;
- modulus of elasticity in bending ≥ 2000 MPa;
- water sorption ≤ 32 μg/mm³;
- solubility ≤ 1.6 µg/mm³.
Packaging:
- 500g
Vertex Self Curing polymer 500g
Vertex Self Curing is a self-polymerizing acrylic material.
Characteristics:
- color 4: colorless;
- color 10: transparent pink with veins;
- short polymerization time 10 min. at 45-55 °C and 2.5 bar pressure;
- easy and convenient to use.
Application:
- denture repairs;
- denture relines;
- increasing the range of partial and complete dentures.
Packaging:
- 500g
Vertex Castapress polymer 500g
Vertex Castapres cold polymerizing acrylic.
Characteristics:
- color 4: colorless;
- color 10: transparent pink with veins;
- polymerizes at 55 °C under a pressure of 2.5 bar for 30 minutes;
- easy and convenient to use.
Application:
- complete dentures;
- partial dentures;
- frame prostheses;
- relining of dentures;
- denture repairs;
- Rebasing of full and partial dentures made of cold-curing acrylics.
Packaging:
- 500g
Villacryl S set 100g/50ml
Villacryl S, a self-polymerizing material intended for denture repairs.
Colors:
- 0 colorless;
- V2 milky pink veined;
- V4 pink veined.
Characteristics:
- easy to prepare and process;
- enables quick repair of the prosthesis;
- guarantees the aesthetics of the repair;
- bonds well with the denture plate;
- does not contain heavy metals;
- biologically neutral.
Packaging:
- 100g/50ml
Duracrol polymer 500g
Duracrol, a self-polymerizing acrylic resin for making custom spoons.
Characteristics:
- for making individual impression trays and phantom models;
- convenient and easy to use;
- yellow color.
Packaging:
- 500g
Duracryl Plus polymer pink color Z 500g
Self-polymerizing material for denture repairs.
Color:
- pink.
Application:
- extension of removable denture bases after extractions;
- immediate dentures;
- repairs of removable dentures.
Packaging:
- powder 500 g
Villacryl H plus set 750g+400ml
Villacryl H Plus is a heat-polymerized polymethacrylate material intended for the production of base plates for full and partial dentures.
Colors:
- 0 colorless;
- V2 milky pink veined;
- V4 pink veined.
Characteristics:
- easy to prepare and process;
- ensures comfort of using the prosthesis;
- high aesthetics of the prosthesis thanks to its natural color;
- increased mechanical strength;
- does not contain heavy metals and tertiary amines;
- biologically neutral.
Technical data:
- mixing proportions 24 g powder / 10 g (10.5 ml) liquid;
- dough preparation time: 20-25 min. (at 23 °C);
- dough shelf life: 25-30 min. (at 23 °C);
- polymerization process 30 min. – 60°C→100°C ,30 min. – 100 °C ,30 min. – air cooling;
- fracture strength > 65* MPa;
- solubility < 1.6* µg/mm³;
- Sorption < 32* µg/mm³.
Packaging:
- 750g powder/400ml liquid
Villacryl H Plus monomer 400ml
Villacryl H Plus, fluid for heat-polymerizing acrylic.
Packaging:
- 400ml
Vertex RS Rapid Simplified monomer 1000ml
Vertex Rapid Simplified.
Hot polymerization fluid.
Packaging:
- 1000ml
Vertex Rapid Simplified 4000g polymer color 10
Vertex Rapid Simplified acrylic for making full and partial dentures.
Characteristics:
- color 10 (transparent pink with veins);
- polymerizing under the influence of high temperature;
- adapted to accelerated (20 min.) and traditional polymerization.
Application:
- complete dentures;
- partial dentures.
Technical specifications:
- dough phase 15 minutes;
- working time 30 minutes;
- curing time 20 minutes at 100°C;
- mixing ratio by volume 1 ml / 0.95 g liquid (monomer) 2.3 g powder (polymer);
- impact resistance 11.3 kJ/m²;
- bending strength ≥ 65 MPa;
- modulus of elasticity in bending ≥ 2000 MPa;
- water sorption ≤ 32 μg/mm³;
- solubility ≤ 1.6 µg/mm³.
Packaging:
- 4000g
FuturaSelf polymer 500g
FuturaSelf cold polymerizing acrylic material.
Colors:
- pink veined;
- pink transparent veined.
Characteristics:
- for denture repairs;
- for denture relines.
Packaging:
- 500g
Vertex Castapress polymer 1000g
Vertex Castapress cold polymerizing acrylic.
Characteristics:
- color 10 pink with veins;
- color 4 colorless;
- Vertex Castapress polymerizes at 55 °C under a pressure of 2.5 bar for 30 minutes;
- easy and convenient to use.
Application:
- complete dentures;
- partial dentures;
- frame prostheses;
- denture relines;
- denture repairs;
- rebasing of full and partial dentures made of cold-curing acrylics.
Packaging:
- 1000g
Probase Hot Clear polymer 500g
ProBase Hot is an acrylic material that polymerizes at elevated temperatures.
Introduces a new quality standard for removable dentures made using the flask technique.
The physical and mechanical properties of the material guarantee ease and reliability of work regardless of the chosen polymerization technique.
Characteristics:
- colorless;
- easy to use;
- shape and color stability;
- fine-grained structure;
- several polymerization methods;
- no cadmium in the dye;
- compliance with EN ISO 1567.
Indications :
- complete dentures;
- partial dentures;
- combined dentures.
Packaging:
- 500g
ProBase Cold Clear polymer 500 g
ProBase Cold is a self-polymerizing acrylic material.
ProBase Cold dentures can be manufactured using two different techniques - pouring and applying.
In both cases, work of the highest quality is obtained.
Characteristics:
- colorless;
- ease of working with the material;
- constancy of shape and color;
- two work techniques;
- no cadmium in the dye;
- compliance with EN ISO 1567.
Indications:
- complete dentures;
- partial dentures;
- denture relining:
- repairs.
Packaging:
- 500g
Triplex Hot polymer PV 500g
Triplex Hot is an acrylic material that polymerizes at high temperature.
Characteristics:
- pink with veins;
- designed for making prostheses using the overlay technique;
Recommended polymerization method:
- place the can in the frame in a container with cold water;
- heat the water to 100 °C;
- keep boiling for 45 min.
Alternative polymerization method:
- Place the can in the frame in a pot of boiling water and keep boiling for 20 minutes.
Indications:
- complete dentures;
- partial dentures;
- combined dentures;
- relining.
Packaging:
- 500g
Futura Press LT polymer 1000g
FuturaPress LT is a cold polymerization acrylic.
Colors:
- colorless;
- pink with veins;
- pink transparent with veins.
Characteristics:
- for making acrylic elements of skeletal prostheses;
- for relining and repairing dentures.
Advantages:
- excellent physical properties;
- high color stability;
- low shrinkage.
Packaging:
- 1000g
FuturAcryl 2000 monomer 500ml
FuturAcryl 2000, acrylic fluid for hot polymerization.
Packaging:
- 500ml
Villacryl H Rapid set 750g/400ml
Villacryl H Rapid, acrylic designed for rapid hot polymerization of the basic plates of full and partial dentures.
Color:
- 0 colorless;
- V2 milky pink veined;
- V4 pink veined.
Characteristics:
- easy to prepare and process;
- minimizes hot polymerization time;
- high mechanical strength;
- biologically neutral.
Polymerization time:
- 10 minutes – 80 °C→100 °C
- 20 min - 100 °C
- 20 min. – cooling at room temperature
Technical data:
- mixing proportions: 24 g powder/10 g (10.5 ml) liquid;
- dough preparation time: 8-10 minutes;
- pot life: 20 minutes;
- fracture strength: > 65* MPa;
- solubility: < 1.6* µg/mm³;
- sorption: < 32* µg/mm³.
Packaging:
- 750g/400ml
Villacryl IT for individual spoons 750g/200ml
Self-polymerizing, acrylic material intended for making individual impression trays.
The material is available in two colours: green and pink.
Pink acrylic allows for the production of occlusal patterns and fitting of teeth set in wax directly on the plate (wax cylinders).
Advantages:
- easy to prepare and process;
- is ready to use immediately after mixing;
- does not stick to hands;
- short spoon preparation time;
- does not contain heavy metals.
Color:
- green;
- pink.
Technical data:
- shelf life of the dough - 5';
- time to prepare the dough for use - 30-60'';
- self-polymerization time - 9';
- mixing proportions - 21 g powder/6 ml (5.6 g) liquid;
- fracture strength - >37 MPa.
Packaging:
- 750g/200ml
FuturAcryl 2000 polymer 1000g
FuturAcryl 2000 is an acrylic material intended for hot polymerization.
Color:
- pink with veins;
- pink banners with veins;
- colorless.
Advantages:
- excellent mechanical properties;
- suitable for quick curing (approx. 20 minutes);
- high surface compression, making it great for polishing;
Characteristics:
- making full and partial dentures;
- It is suitable for making dentures using any technique, but has been specially developed for the packing or injection method and short polymerization.
Packaging:
- 1000g
Superacryl Plus polymer 500g
Superacryl Plus thermosetting acrylic resin.
Colors:
- From pink;
- X pink with veins;
- 0 colorless.
Characteristics:
- for the production of full and partial denture plates.
Packaging:
- 500g
Estetic S for repairs 100g/50ml
Estetic S self-polymerizing acrylic material for the repair of dentures and orthodontic appliances.
Available colors:
0 colorless;
8 pink without veins;
10 pink without veins;
8V pink with veins;
10V pink with veins;
Characteristics:
- for denture repairs;
- high quality material at a low price.
Technical data:
- mixing proportions: by weight powder/liquid - 2:1;
- dough preparation time: 2-5 minutes;
- Dough shelf life: 3.5 minutes;
- polymerization process: 20 min.; 40-50°C; 2 bar;
- residual monomer content: 3.46%;
- fracture strength: 62.5 Mpa;
- bending elasticity: 2043 MPa;
- solubility: 2.6 μg/mm³;
- sorption: 23.8 μg/mm³.
Packaging:
- 100g/50ml
Villacryl H Rapid monomer 400ml
Villacryl H Rapid, acrylic fluid for heat polymerization.
Packaging:
- 400ml
Villacryl SP 500g/300ml + Stodent plaster IV class cream vanilla 1kg
Acrylic material intended for the production of acrylic parts in skeletal dentures, as well as for the production of complete dentures using the pouring method.
It can also be used to repair dentures or to create temporary or immediate dentures.
Colors:
- 0 colorless;
- V2 milky pink veined;
- V4 pink veined.
Characteristics:
- easy to prepare and process;
- enables quick production of a prosthesis using the pouring method using silicone pre-pourings;
- ensures the patient's comfort when using the prosthesis;
- well masks the metal structure of the skeletal prosthesis;
- high aesthetics of the prosthesis thanks to its natural color;
- colour stability;
- does not contain heavy metals;
- biologically neutral.
Technical data:
- mixing proportions – acrylic parts of frame dentures: 10 g powder / 7 ml (6.5 g) liquid;
- casting time – acrylic parts of frame dentures: 60-90 s (23 °C);
- polymerization process – acrylic parts of frame dentures: 50-60 °C minimum 20 min. 2 bar;
- fracture strength: > 60* MPa;
- solubility: < 8* µg/mm³;
- sorption: < 32* µg/mm³;
- mixing proportions – infusion-based dentures: 10 g powder / 5.2 ml (5 g) liquid;
- casting time – poured dentures: 30-60 s (23 °C);
- polymerization process – poured dentures: 60 °C 30 min. 2 bar.
Packaging:
- 500g powder/300ml liquid
Villacryl H Plus color V4 polymer 2 kg
Villacryl H Plus, a heat-polymerized polymethacrylate material intended for the production of base plates for full and partial dentures.
Characteristics:
- easy to prepare and process;
- ensures comfort of using the prosthesis;
- high aesthetics of the prosthesis thanks to its natural color;
- increased mechanical strength;
- does not contain heavy metals and tertiary amines;
- biologically neutral.
Technical data:
- mixing proportions 24 g powder / 10 g (10.5 ml) liquid;
- dough preparation time: 20-25 min. (at 23 °C);
- dough shelf life: 25-30 min. (at 23 °C);
- polymerization process 30 min. – 60°C→100°C,30 min. – 100 °C,30 min. – air cooling;
- fracture strength > 65* MPa;
- solubility < 1.6* µg/mm³;
- Sorption < 32* µg/mm³.
Packaging:
- 2kg
Estetic hot melt acrylic polymer 500g
Estetic acrylic material for making denture plates, heat polymerizing.
Available colors:
- 0 colorless;
- 8 pink unveined;
- 10 pink without veins;
- 8V pink with veins;
- 10V pink with veins.
Characteristics:
- requires a short polymerization time;
- is characterized by low water and saliva absorption;
- excellent plasticity and ease of forming under press pressure does not cause increased short-circuit;
- can be combined with soft, flexible relines;
- the translucency of the mass allows the natural color of the patient's mucous membrane to be highlighted
- meets the requirements of the PN-EN ISO 20795-1 standard.
Technical data:
- mixing ratio: powder/liquid by weight - 2:1
- dough preparation time: 10-15 min.
- Shelf life of the dough: 15 min.
- residual monomer content: 1.33%
- fracture strength: 73.0 Mpa.
- bending elasticity: 2334 MPa.
- solubility: 0.1 μg/mm³
- sorption: 22.6 μg/mm³
Polymerization process:
- Place the can in boiling water (or, in the case of thick dentures, in cold water and bring to a boil)
- keep at 100°C for 20 min.
- cool in water to room temperature.
Packaging:
- 500g
Villacryl H Rapid color V4 polymer 750g
Villacryl H Rapid, acrylic for rapid hot polymerization, intended for the production of base plates for full and partial dentures.
Characteristics:
- easy to prepare and process;
- minimizes hot polymerization time;
- high mechanical strength;
- biologically neutral.
- Color V4 pink with veins.
Packaging:
- 750g powder
MERZ Dental Weropress cold acrylic polymer 1000 g
Cold-polymerizing, colour-stable plastic mass based on methyl methacrylate for the preparation of partial and full dentures by injection, extrusion, pressing or casting.
Colors:
- pink transparent with V-10 veins;
- dark pink opaque with veins C34.
Scope of application:
- complete dentures;
- hybrid and overlay dentures;
- finishing and completing combined fixed-removable dentures;
- fixing teeth on cast frames;
- relining;
- repairs, extensions;
- occlusal aids, production of splints.
Packaging:
- 1kg
Villacryl H Plus polymer 750g
Villacryl H Plus, a heat-polymerized polymethacrylate material intended for the production of base plates for full and partial dentures.
Colors:
- 0 colorless;
- V4 pink veined.
Characteristics:
- easy to prepare and process;
- ensures comfort of using the prosthesis;
- high aesthetics of the prosthesis thanks to its natural color;
- increased mechanical strength;
- does not contain heavy metals and tertiary amines;
- biologically neutral.
Technical data:
- mixing proportions 24 g powder / 10 g (10.5 ml) liquid;
- dough preparation time: 20-25 min. (at 23 °C);
- dough shelf life: 25-30 min. (at 23 °C);
- polymerization process 30 min. – 60°C→100°C ,30 min. – 100 °C ,30 min. – air cooling;
- fracture strength > 65* MPa;
- solubility < 1.6* µg/mm³;
- Sorption < 32* µg/mm³.
Packaging:
- 750g
