Remanium GM 380+ 1 pc.
Remanium GM 380 + for making standard structures with high strength. Universal use in the technique of skeletal dentures.
Chemical composition:
- Every 64.6%
- Cr 29%
- Mo 4.5%
- other SI,Mn,N,C.
- Initial melting point 1300 °C.
- Final melting point 1370 °C.
Packaging:
- 1 piece.
Wironit extrahard - 1 piece BEGO
Wironit extrahard ideal alloy for casting elements of combined works.
Characteristics:
- Percent composition by weight Co - 63.0 Cr - 30.0 Mo - 5.0 Si,Mn,C < 2.
- Density 8.2g/cm3.
- Melting range 1260-1305 °C.
- Casting temperature 1420 °C.
- Elongation at break (A5) 4.1%.
- Tensile strength (Rm) 910 {MPa}.
- Yield strength (Rp 0.2) 625{MPa}.
- Modulus of elasticity 225{GPa}.
- hardness acc. Vickers (HV10) 375.
Packaging:
- 1 piece.
Remanium GM 800+ 1 cube
Remanium GM 800 + alloy for casting skeletal dentures. The mirror luster of the molten metal makes it possible to determine the correct casting moment.
Characteristics:
- The alloy has a high fracture resistance due to its excellent physical properties.
- The high modulus of elasticity allows for delicate, yet stable structures.
- The reduced hardness makes it easier to prepare and polish.
- High surface gloss after electropolishing.
- Perfect for laser welding.
Chemical composition:
- Every 63.3%.
- Cr 30.0%.
- Mo 5.0%.
- Si 1%.
- MN,C,N
parameters:
- Yield strength Rp 0.2 - 720 MPa.
- Tensile strength Rm - 960 MPa.
- Hardness HV 10 - 370.
- Total elongation at break A5 - 6.0%.
- Young's modulus - modulus of elasticity - 230000 MPa.
- Density - 8.2 g/cm3.
- temp. initial melting - 1240 degrees C.
- temp. final melting point - 1410 degrees C.
Packaging:
- 1 pc. / approx. 6g
Magnum H 60- 1 cube (formerly H75)
Magnum H60 steel, a dental alloy for cobalt-based skeletal dentures.
Characteristics:
- temperature of solidus-liquidus curves - 1321-1407 ° C
- melting point - 1460 ° C
- Vickers hardness - 394 HV 10
Chemical composition:
- Every 63%.
- Cr 29%.
- Mo 6.5%.
- other C, Si, Fe, Mn.
Package:
- 1 piece.
Biosil F1 cube
Biosil F resilient chrome-cobalt prosthetic alloy for casting of skeletal dentures. Thanks to its exceptional elasticity, it is recommended for the performance of skeletal works with long arms of retention clamps.
Features:
- Composition: Co - 64.8%, Cr - 28.5%, Mo - 5.3%, Si - 0.5%, Mn - 0.5%, C - 0.4%.
- Melting point: 1320-1380 ° C.
- Casting temperature: 1500 ° C.
- Mold annealing temperature: 1000 ° C.
- Vickers hardness: 400 HV 10.
- Tensile strength: 900 N / mm².
- Destruction limit: 5%.
- Density: 8.4 g / cm2.
- Yield point: 700 N / mm².
- Modulus of elasticity: 220 GPa.
Package:
- 1 piece.
Wironit LA Cr-Co - 1 pc
Co-Cr alloy for clasp dentures and combined work.
Chemical composition:
- Every 63.5
- Cr 29
- Mo: 5.0
- C max. 0.25
- Others: Si, Mn
Alloy Characteristics:
- Density [g / cm3] 8.2
- Hardness according to Vicker (HV 10) 360
- The yield point (Rp 0.2) [Mpa] 640
- Tensile strength (Rm) [Mpa] 940
- Elongation at break (A5) [%] 8
- Modulus of elasticity approx. [MPa] 220,000
- Melting range [° C] 1340-1300
- Casting temperature [° C] 1450
Package:
- 1 piece
DFS Diadur metal Co-Cr for skeletons - cube
Resilient alloy for skeletons, very well suited for thin plates. Biocompatible.
It pours very well.
Chemical composition:
- Every 62.5%
- Cr 30%
- Mo 5%
- Si 1%
- Mn 1%
- C 0.5%
Properties:
- density: 8.2 g / cm3
- melting range: 1260-1320 C
- pouring temperature: 1450 C
- breaking elongation: 4.5%
Package:
- 1 cube
Modelstar S 1kg.-alloy for Co-CR frames
Resilient base alloy for the fabrication of skeletal dentures with normal clasps and combined work based on cobalt, chromium and molybdenum. According to the requirements of ISO 22674, the alloy is classified as type 5 category. It does not contain beryllium, nickel and cadmium.
** THE PERCENTAGE COMPOSITION:**
- Every 62.7%
- Cr 29%
- Mo 6%
- other C, Fe, Si <1%
Technical data:
- The ductility limit (Rp 0.2) - 510-600 MPa
- Tensile strength - 770-780 MPa
- Strain at break> 3%
- Modulus of elasticity - 200-230 GPa
- Hardness on the Vickers scale - 355 HV 10
- Connecting with a laser - yes
- Density - 8.4 g / cm³
- Liquidity range - 1170 - 1390 ° C
- Temp. casting - 1490 - 1540 ° C
- Thermal expansion coefficient - 15-16 μm / m ° C
Package:
- 1 kg.
Modell EH stop CoCr Realloy 1 cube
Model EH
CoCr hard casting alloy, ideal for partial dentures
Features:
- Castable by all melting methods
- Also suitable for laser welding
- Corrosion resistant
- High stability
- Biocompatible
- High quality.
Chemical composition:
- Every 62.5%
- Cr 30.0%
- Mo 5.1%
- Si 1.0%
- Mn 1.0%
- C <1%
- This alloy is nickel and beryllium free and complies with EN ISO 22674, type 5
Technical data:
- Density 8.2 g / cmł
- Vickers hardness 375 (HV10)
- Melting range 1260 - 1320 (° C)
- Casting temperature 1490 (° C)
- Yield point (0.2%) 620 (MPa)
- Tensile strength 920 (MPa)
- E- module 220 (GPa)
- Elongation at Break (A5) 4.5 (%)
Package:
1 piece (about 6.17 g)
Wironit Co-Cr 1kg
Classic alloy for skeletal dentures based on cobalt and chromium (nickel free)
Chemical composition:
- Every 64,
- Cr 28.6,
- Mo 5.0,
- Si 1,
- Mn, C <1.
Alloy Characteristics:
density 8.2 g / cm3
melting temperature range 1260-1305 ˚C
casting temperature 1460 ˚C
elongation at break (A5) 10%
tensile strength (Rm) 880 {MPa}
yield point (Rp 0.2) 615 {MPa}
modulus of elasticity 225 {GPa}
hardness acc. to Vickers (HV10) 360
Magnum H60 1kg (formerly H75)
Magnum H60 steel, a dental alloy for cobalt-based skeletal dentures.
Characteristics:
- temperature of solidus-liquidus curves - 1321-1407 ° C
- melting point - 1460 ° C
- Vickers hardness - 394 HV 10
Chemical composition:
- Every 63%.
- Cr 29%.
- Mo 6.5%.
- other C, Si, Fe, Mn.
Package:
- 1 kg.l
Modell EH alloy CoCr Realloy 1kg for skeletons
Model EH
CoCr hard casting alloy ideal for use in partial dentures.
Characteristics:
- For casting by all methods
- Also suitable for laser welding
- Corrosion resistant
- High stability
- Biocompatible
- High quality
Chemical composition:
- Every 62.5%
- Cr 30.0%
- Mo 5.1%
- Si 1.0%
- Mn 1.0%
- C <1%
- This alloy is nickel and beryllium free and complies with EN ISO 22674, type 5
Technical data:
- Density 8.2 g / cm
- Vickers hardness 375 (HV10)
- Melting range 1260 - 1320 (° C)
- Casting temperature 1490 (° C)
- Yield point (0.2%) 620 (MPa)
- Tensile strength 920 (MPa)
- E- module 220 (GPa)
- Elongation at Break (A5) 4.5 (%)
Package:
- 1 kg
Wironit extrahard - 1kg. BEGO
Wironit extrahard is an ideal alloy for casting elements of combined work.
Characteristics:
- Composition by weight of Co - 63.0 Cr - 30.0 Mo - 5.0 Si, Mn, C <2.
- Density 8.2 g / cm3.
- Melting range 1260-1305 ° C.
- Casting temperature 1420 ° C.
- Elongation at Break (A5) 4.1%.
- Tensile strength (Rm) 910 {MPa}.
- The yield point (Rp 0.2) 625 {MPa}.
- Modulus of elasticity 225 {GPa}.
- Hardness acc. Vickers (HV10) 375.
Package:
- 1 kg.
Wironit LA Cr-Co - 1 kg
Co-Cr alloy for clasp dentures and combined work.
Chemical composition:
- Every 63.5
- Cr 29
- Mo: 5.0
- C max. 0.25
- Others: Si, Mn
Alloy Characteristics:
- Density [g / cm3] 8.2
- Hardness according to Vicker (HV 10) 360
- The yield point (Rp 0.2) [Mpa] 640
- Tensile strength (Rm) [Mpa] 940
- Elongation at break (A5) [%] 8
- Modulus of elasticity approx. [MPa] 220,000
- Melting range [° C] 1340-1300
- Casting temperature [° C] 1450
Package:
- 1 kg
Diadur DFS Metal Co-Cr for 1 kg frames
Characteristic:
Resilient alloy for skeletons, very well suited for thin plates. Biocompatible.
It pours very well.
Chemical composition:
- Every 62.5%
- Cr 30%
- Mo 5%
- Si 1%
- Mn 1%
- C 0.5%
Properties:
- density: 8.2 g / cm3
- melting range: 1260-1320 C
- pouring temperature: 1450 C
- breaking elongation: 4.5%
Package:
- 1 kg
Remanium GM 800 + 1 kg Promotion
Remanium GM 800 + Frame Denture Casting Alloy. The mirror-like luster of the molten metal makes it possible to determine the correct moment of casting.
Characteristics:
- The alloy has a high fracture resistance due to its excellent physical properties.
- The high modulus of elongated elasticity allows for obtaining delicate and yet stable structures.
- The reduced hardness facilitates processing and polishing.
- High surface gloss after electropolishing.
- Perfect for laser welding.
Chemical composition:
- Every 63.3%.
- Cr 30.0%.
- Mo 5.0%.
- Si 1%.
- MN, C, N.
Parameters:
- Yield point Rp 0.2 - 720 MPa.
- Tensile strength Rm - 960 MPa.
- Hardness HV 10 - 370.
- Total elongation after rupture A5 - 6.0%.
- Young's modulus - modulus of longitudinal elasticity - 230,000 MPa.
- Density - 8.2 g / cm3.
- Temp. initial melting - 1240 degrees C.
- Temp. final melting - 1410 degrees C.
Package:
- 1 kg
Remanium GM 380 + 1 kg Promotion
Remanium GM 380 + for the production of standard high-strength structures. Universal use in the technique of skeletal dentures.
Characteristics:
- Every 64.6%
- Cr 29%
- Mo 4.5%
- other SI, Mn, N, C.
- The initial melting temperature of 1300 degrees C.
- The final melting temperature is 1370 degrees C.
Package:
- 1 kg
Biosil F 1 kg
Biosil F, resilient chrome-cobalt prosthetic alloy for casting of skeletal dentures. Thanks to its exceptional elasticity, it is recommended for the performance of skeletal works with long arms of retention clamps.
Characteristics:
- Composition: Co - 64.8%, Cr - 28.5%, Mo - 5.3%, Si - 0.5%, Mn - 0.5%, C - 0.4%.
- Melting point: 1320-1380 ° C.
- Casting temperature: 1500 ° C.
- Mold annealing temperature: 1000 ° C.
- Vickers hardness: 400 HV 10.
- Tensile strength: 900 N / mm².
- Destruction limit: 5%.
- Density: 8.4 g / cm2.
- Yield point: 700 N / mm².
- Modulus of elasticity: 220 GPa.
Package:
- 1 kg.