Semicircular wax profiles 1.8 x 0.9 mm

Characteristics:

• No surface tension.
• Very smooth.

Packaging :

50g.

Ivanson thickness gauge for metal or wax.

Package:

• 1 piece.

Sublingual wax arches for the lower jaw

Features:

• Teardrop shape.
• 4.0x2.0mm.

Package :

65g / pack

RN wax templates and thick retention grid.

Characteristics:

• Made of the best raw materials.
• No fillers, burning without residue.

Packaging :

20 pcs/pack

Wax wire for casting channels.

Characteristics:

• green color
• medium-hard
• thickness 3.0 mm.
• easy to shape, does not bend and burns without residue.
• high resistance to deformation and compression during forming.

Packaging:

• Roll 250g. (approx. 36m)

Wax wire for casting channels.

Characteristics:

• Green color.
• Medium-hard.
• Thickness 3.5mm.
• Easy to shape, does not bend and burns without residue.
• High resistance to deformation and compression during forming.

Packaging:

• Roll 250g (approx. 28m)

Polishing brush, textile made of white cloth.

Characteristics:

• Diameter 95mm.
• Thickness 5.5 mm.
• Metal center.
• For use on a polisher.

Packaging:

• 1 piece.

Kromptypo 4. Class IV extra hard prosthetic plaster with chromatic setting phase indicator for making models with high compressive and abrasion resistance.

Characteristics:

• Final color: pastel yellow.
• Water to powder ratio: 22ml/100g.
• Absorption time: 20 seconds.
• Mixing time (manual): 60 seconds.
• Mixing time (mechanical): 30 seconds.
• Pouring time: 3 minutes.
• Setting time: 7 minutes.
• Separation time after setting: 25-30 minutes.
• Expansion setting (after 2 hours): 0.08%
• Compressive strength (after 24 hours): 81 MPa, 11,740 psi, 828 kg/cm2.
• Rockwell hardness (after 24 hours): 85 HRL.

Packaging:

• 5kg

Abrasive stones for finishing metal grinding, mounted on a mandrel.

Packaging:

• 1 piece.

A holder (mandrill) for rubber bands and brushes on a cylinder or disc handpiece.

Packaging:

• 1 piece.

Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.

• Dimensions 35x20 mm.

Packaging:

• 1 piece.

Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.

• Dimensions 40x20 mm.

Packaging:

• 1 piece.

The Basic Classic sandblaster is the perfect first step into the world of professional sandblasting techniques with pen sandblasters. Compact device in basic configuration with up to 2 tanks. Thanks to its slim design, the sand spreader finds its place even in the smallest spaces. Two sand tanks, e.g. filled with sand 25-70µ and 70-250µ, cover all standard requirements of dental technology, e.g. for precious metals and porcelain.

Renfert catalog number 29472025

Advantages:

• Precise work thanks to the unique technology used in the mixing chamber (using the Venturi principle).
• Tool-free expansion to 2 tanks.
• Using the tank switch located inside the sandblaster chamber ensures efficient operation.
• 36-month warranty

Technical data:

• Mains voltage 220-240 V, 50/60 Hz
• Working pressure 1-8 bar
• External connection pressure 5-8 bar
• Air consumption at 6 bar (87 psi) 98 l/min
• Lamp power 16 W
• Cable length 2 m
• Dimensions (width x height x depth) 350 x 270 x 470 mm
• The size of the sandblaster chamber is 14 l
• Capacity of 1 tank 1000 ml
• Weight (unfilled) 6.5 kg

Packaging:

• 1 piece.

Sand for the sandblaster 250 microns.

Composition:

• Al2O3 content: over 99%
• Admixtures: Na20, K20, CaO, SiO2 and Fe2O
• Specific density: 3.95 +/- 0.5 g/cm3
• Bulk density: 1.52- 1.85 g/cm3
• Hardness: over 9 on the Mohs scale
• Grain shape: sharp-edged

Packaging:

• 5kg.

Reinforced mandrel for 8mm handpiece, for rubber bands, brushes and stones.

Packaging:

• 1 piece.

Wax profiles of clasps for molars and premolars, medium-hard, maintaining their shape.

Characteristics:

• On the molars and premolars, the semi-drop cross-section prevents the deposition of food remains and increases the stability along the entire length of the clasps, giving it a very slim shape.
• Very good acceptance by patients.

Packaging:

• 280 pcs of buckles/pack.

Textured casting wax (morka), green.

• Plate thickness 0.6mm
• Medium veined (mittel)
• Size 15x7.5cm.

Characteristics:

• Proven wax for modeling maxillary denture plates.
• The wax texture gives the denture plate a more anatomical surface.
• It adapts well and adheres precisely to the model.

Packaging:

• 15 pcs/pack

Chamois leather brush for polisher.

• The material from which the brush is made dries out after some time and must be moistened to regain its properties.

• Brush diameter 80 x 5.5 mm.

Packaging:

• 1 piece.

Armored shield for a polisher.

• Diameter 100mm.

Packaging:

• 1 piece.

Stodent III Ortho is a type 3 hard orthodontic plaster recommended for archival, diagnostic and working models when making removable orthodontic appliances.

Description:

• Glossy white color.
• Small expansion.

Advantages:

• Smooth surface.
• Easy to prepare and process.
• Surface resistance to abrasion.

Technical data:

• Mixing proportions approx. 28-30 ml / 100 g.
• Mixing time (vacuum) 30 s.
• Mixing time (manual) 60 – 90 s.
• Setting time 10 -14 min.
• Release time from the impression 45 min.
• Compressive resistance (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2 hours ) max. 0.15% [< 0.20 %]

Packaging:

• 25kg

Attention:

• Due to the heavy weight of the goods (25 kg), an additional fee will be added to the shipment.

Retentions of split models.

• Elements connecting plaster layers in split models.
• They provide a very good connection.
• They don't drown.
• They can be easily cut without damaging the saw blades.

Packaging :

• 500 pcs.

Villacryl H Plus, a hot-polymerized polymethacrylate material, intended for making base plates of full and partial dentures.

Characteristics:

• Easy to prepare and process.
• Provides comfort when using the prosthesis.
• High aesthetics of the prosthesis thanks to natural colors.
• Increased mechanical strength.
• Does not contain heavy metals and tertiary amines.
• Biologically neutral.

Technical data:

• Mixing proportions 24 g powder / 10 g (10.5 ml) liquid.
• Dough preparation time 20-25 minutes. (at 23 °C)
• The shelf life of the dough is 25-30 minutes. (at 23 °C)
• Polymerization process 30 min. – 60°C→100°C, 30 min. – 100 °C, 30 min. – air cooling.
• Breaking strength > 65* MPa.
• Solubility < 1.6* µg/mm3.
• Sorption < 32* µg/mm3.

Packaging:

• 750g powder/400ml liquid

Remanium CSe alloy of the latest generation for ceramics in the crown and bridge technique.

Characteristics:

• Very good ceramic adhesion, even after several firings.
• Contains no beryllium, biologically compatible.
• Resistant to corrosion in the mouth.

Chemical composition:

• Ni 61%.
• Cr 26%.
• Mo 11%.
• Si 1.5%.
• Co,Fe,Al,Ce <1%.

Technical data:

• Yield strength Rp0.2 - 340 MPa.
• Tensile strength Rm - 580 MPa.
• Hardness HV 10 - 195.
• Total elongation after tearing A5 - 15%.
• Yung modulus (longitudinal elasticity coefficient) - 170,000 MPa.
• Density - 8.2 g/cm3.
• WAK (25- 500 C) 14x10- 6K- 1.
• Initial melting point - 1280 °C.
• Final melting point 1350 °C.

Packaging:

• 1 piece

Solder sticks for all cobalt chrome alloys for framework dentures.

Characteristics:

• Melting range 1100-1150 °C.
• Operating temperature 1180 °C.
• Fluxol - Fluxol.
• Percent composition by weight : Cr 61; Cr 28.5; Mo 3.5; Si 4; Fe;B;C.

Packaging:

• min 4g.

A plastic casting ring with a base 34x55mm.

Package:

1 piece.

Plastic casting ring with a base 50x55mm.

Package:

1 piece.

Separating Fluid exhibits exceptional separating properties and thus optimally insulates all denture base materials and ensures smooth surfaces.

• Insulation: plaster / acrylic, plaster / plaster.

Package:

• 500 ml.

Stodent III is a type 3 hard plaster recommended for antagonist models and working models when making removable and skeletal dentures.

Description:

• Light green color enriched with mango aroma.
• Small expansion.
• Good mechanical properties.

Advantages:

• Smooth surface.
• Easier model making thanks to high thixotropy.
• High resistance to fracture when released from the impression.

Technical data:

• Mixing proportions 30 ml / 100 g.
• Mixing time (vacuum) 30 s.
• Mixing time (manual) 60 – 90 s.
• Setting time 10 -14 min.
• Release time from the impression 45 min.
• Compressive resistance (after 1h ) 25 ± 2 MPa [> 20 MPa]
• Linear expansion (after 2 hours ) max. 0.15% [< 0.20 %]

Packaging:

• 3kg.

Abrasive metal strips. Width 4mm, length 13.5 cm.

Package:

12 pcs.

Diadur - Ceramic stones with diamond coating.

Embankment:

• coarse

Advantages:

• maintains its shape during wear.
• excellent durability
• heat resistant, does not overheat during operation.
• recommended working speed 10,000 - 15,000 rpm. max. 35,000 minutes

Packaging:

1 piece.

For finishing and polishing porcelain restorations.

• Diameter 22 mm.

Advantages:

• The silicone bond adapts to the surface being treated
• Silicon carbide abrasive.

Packaging:

• 10 pcs

For finishing and polishing porcelain restorations.

• Diameter 22mm.

Advantages:

• The silicone bond adapts to the surface being treated
• Silicon carbide abrasive

Packaging:

• 10 pcs

Iris Scissors for Gums 11cm.

Characteristics:

• Simple.
• Bent.

Package:

• 1 piece.

Needle holder Mathieu 14cm.

Package:

1 piece.

Spirit burner.

Packaging:

1 piece

MicroTorch Type I burner

Characteristics:

• Once filled, it is enough for 60 minutes of continuous operation.
• For use in dental and prosthetic offices.
• Filled with lighter gas (propane-butane).
• Easy to use.
• Achievable temperature: 1300 °C
• 3 months warranty.

Packaging:

• 1 piece.

Flexible, Habras brushes are made of soft polyamide impregnated with grinding and polishing agents. Color-coded Habras discs are versatile. For polishing precious metal alloys, cast alloys, denture plastics, non-hardening and thermoplastics, orthodontic plastics, etc. without polishing paste.

Characteristics:

• assembled.
• shank diameter 2.35 mm.
• ø 25mm.
• Recommended operating speed 5000 rpm.
• 3 dials on one mandrel.
• Grit 36, extra coarse .
• Brown color.

Packaging:

• 1 piece

Flexible, Habras brushes are made of soft polyamide impregnated with grinding and polishing agents. They do not generate heat during operation. Color-coded Habras discs are versatile. For polishing precious metal alloys, cast alloys, denture plastics, non-hardening and thermoplastics, orthodontic plastics, etc. without polishing paste.

Characteristics:

• assembled.
• shank diameter 2.35 mm.
• ø 25mm.
• Recommended operating speed 5000 rpm.
• 3 dials on one mandrel.
• Grit 50, very coarse .
• Green color.

Packaging:

• 1 piece

Nickel-chrome prosthetic alloy, non-precious, for cast crowns and bridges veneered with acrylic or composite. Chromium-nickel steel enriched with molybdenum allows the use of all known methods of melting. The best results can be achieved by melting the alloy in the casting machine with high or medium frequency current. An oxy-acetylene torch or an electric arc can also be used.

Composition in percent:

• Ni - 27%.
• Cr - 22%.
• Fe - 42%.
• Si - 4%.
• Mo - 3%.
• Other - C, Mn, Cu.

Melting temperature range:

• 1333 - 1380 °C

temp. casting:

• 1420 °C

Packaging :

• 1 piece.

Polishing brush, hard, convergent, diameter 80mm.

Packaging:

• 1 piece.

Armored shield for a polisher.

• Diameter 64mm.

Packaging:

• 1 piece.

BEGO smooth casting wax. It adheres strongly and burns without residue.

Characteristics:

• Dimensions 17.5x8cm.
• Thickness 0.5mm.
• Green color.

Packaging:

• 15pcs/pack

Flexible, Habras brushes are made of soft polyamide impregnated with grinding and polishing agents. They do not generate heat during operation. Color-coded Habras discs are versatile. For polishing precious metal alloys, cast alloys, denture plastics, non-hardening and thermoplastics, orthodontic plastics, etc. without polishing paste.

Characteristics:

• assembled.
• shank diameter 2.35 mm.
• ø 25mm.
• Recommended operating speed 5000 rpm.
• 3 dials on one mandrel.
• Grit 120, medium.
• White color.

Packaging:

• 1 piece

Flexible, Habras brushes are made of soft polyamide impregnated with grinding and polishing agents. They do not generate heat during operation. Color-coded Habras discs are versatile. For polishing precious metal alloys, cast alloys, denture plastics, non-hardening and thermoplastics, orthodontic plastics, etc. without polishing paste.

Characteristics:

• assembled.
• shank diameter 2.35 mm.
• ø 25mm.
• Recommended operating speed 5000 rpm.
• 3 dials on one mandrel.
• Grit 400, fine.
• Blue color.

Packaging:

• 1 piece

Takanishi synthetic brush, size 8, ideal for applying porcelain.

Renfert catalog number 17140008

Characteristics:

• Tip diameter at the widest point: 4.5 mm.
• Tip length: 12 mm.
• Handle length: 43 mm.
• It remains flexible and stable for a long time.

Packaging:

• 1 piece.

Stodent IV is a super-hard type 4 dental plaster recommended for making working models of fixed frame dentures and flexible dentures, combined works, and post-implantation dentures.

Description:

• Cream color with a vanilla scent.
• Small expansion.
• Good liquidity.

Advantages:

• Very good detail reproduction.
• Smooth surface.
• High resistance to mechanical damage.

Technical data:

• Mixing proportions 20 ml / 100 g
• Mixing time (vacuum) 30 s
• Mixing time (manual) 60 – 90 s
• Setting time 8 -12 min.
• Compressive resistance (after 1h ) 45 ± 2 MPa [> 35 MPa]
• Linear expansion (after 2 hours ) max. 0.10% [< 0.15 %]
• Linear expansion after 24 hours < 0.18* %

Packaging:

• 3kg

Stodent IV is a super-hard type 4 dental plaster recommended for making working models of fixed frame dentures and flexible dentures, combined works, and post-implantation dentures.

Description:

• Ash color with strawberry scent.
• Small expansion.
• Good liquidity.

Advantages:

• Very good detail reproduction.
• Smooth surface.
• High resistance to mechanical damage.

Technical data:

• Mixing proportions 20 ml / 100 g
• Mixing time (vacuum) 30 s
• Mixing time (manual) 60 – 90 s
• Setting time 8 -12 min.
• Compressive resistance (after 1h ) 45 ± 2 MPa [> 35 MPa]
• Linear expansion (after 2 hours ) max. 0.10% [< 0.15 %]
• Linear expansion after 24 hours < 0.18* %

Packaging:

• 3kg

Villacryl H Plus, liquid for hot polymerizing acrylic.

Packaging:

• 400ml.

Die lube pin insulator liquid. For isolating plaster, plastic and metal stumps from wax, porcelain and plastic.

Characteristics:

• It guarantees easy removal of caps shaped in wax.
• It is also used to smooth milled metal surfaces.
• Does not contain oil.
• Does not react with silicone.

Package:

• 50ml.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 °C. As the outer layer wears away, more sharp diamond particles emerge.

Characteristics:

• Diamond Micro 15,000 - 30,000 rpm.
• Application - chrome - cobalt, palladium, porcelain.

Packaging:

• 1 piece.