Vertex Rapid Simplified acrylic for making full and partial dentures.

Characteristics:

• Color 10 (transparent pink with veins)
• Polymerizing under the influence of high temperature.
• Suitable for accelerated polymerization (20 minutes) and traditional polymerization.

Application:

• Complete dentures.
• Partial dentures.

Technical Specifications:

• Dough phase 15 minutes.
• Working time 30 minutes.
• Curing time 20 minutes at 100°C.
• Mixing ratio by volume 1 ml / 0.95 g liquid (monomer) 2.3 g powder (polymer).
• Impact resistance 11.3 kJ/m2.
• Bending strength ≥ 65 MPa.
• Flexural modulus ≥ 2000 MPa.
• Water sorption ≤ 32 μg/mm³.
• Solubility ≤ 1.6 µg/mm3.

Packaging:

• 4000g

Moskito forceps, straight or curved.

• Length 13cm.

Packaging:

• 1 piece.

Brushes and applicators for applying varnish and other auxiliary works. Disposable, attached to a holder.

Packaging:

• 100 pcs

Holder for bonding or application brushes.

Packaging:

• 1 piece.

NEW!!! Set with extension for orthodontics for MT premium

Advantages:

• Fast and precise cutting of orthodontic models using an intuitive template and a special cutting table.
• Greater precision and optimal positioning of the central palatal suture thanks to the use of a guiding light (MT premium only).
• Producing accurate three-dimensional jaw models that take into account all planes of the skull.
• Thanks to the special guide concept, the template is not permanently attached to the device and can therefore be easily removed without tools.
• Easy, quick and tool-free cleaning of all elements.
• Step-by-step instructions with reference models of the upper jaw and lower jaw (also suitable for process documentation).

Technical data:

• Energy consumption 150 mW
• Dimensions (W x H x D) 25 x 42 x 115 mm
• Weight ~40 g
• Laser class 1

Packaging:

• ORTHO MT premium guide set

SR Link is a material that enables a strong bond between composite material and metal.

Characteristics:

• Due to the phosphate groups, SR Link forms a bond with metal oxides, and the methacrylate group of the SR Link molecule reacts with monomers from SR Nexco Opaker. This type of connection is very durable and allows you to reduce the number of retention beads, and thus preparation for the restoration can be much more economical for hard tooth tissues.

Packaging:

• 5ml.

Brush made of linen.

Characteristics:

• Soft.
• Diameter 100mm.
• max. revolutions 3.600/min

Packaging:

• 1 piece.

Acrylic polishers.

Characteristics:

• Gray, medium-grain elastics.
• Work in the range: 5,000- 20,000 rpm.

Packaging:

• 1 piece.

Magnum H60 steel, a dental alloy for cobalt-based skeletal dentures.

Characteristics:

• temperature of solidus-liquidus curves - 1321-1407 ° C
• melting point - 1460 ° C
• Vickers hardness - 394 HV 10

Chemical composition:

• Every 63%.
• Cr 29%.
• Mo 6.5%.
• other C, Si, Fe, Mn.

Package:

• 1 piece.

Izofix 2000 is a film-free gypsum-gypsum insulator for isolating gypsum layers in foldable models.

Advantages:

• Seals the plaster surface without creating a film.
• It penetrates deeply into the surface of the plaster model, clogging the pores and does not change the size of the model.
• The plaster surface hardens and becomes smooth and non-absorbent.

Packaging:

• 2 cans x1000 ml.

Kolinsky natural brush. Perfect for porcelain.

Renfert catalog number 17131006

Advantages:

• Delicate, flexible brush tips.
• Optimal fluid storage.
• Natural bristles combine quality and aesthetics.

Packaging:

• 1 piece

Takanishi synthetic brushes size 6.

Renfert catalog number 17140006

Advantages:

• Tip diameter at the widest point: 3.5 mm.
• Tip length: 18 mm.
• Handle length: 33 mm.
• They remain flexible for a long time.
• They have a wide range of shapes.

Packaging:

• 1 piece.

FuturaSelf cold-curing acrylic material.

Characteristics:

• For repairing dentures.
• For denture relines.

Packaging:

• 500g

Futura Self, cold polymerization liquid.

Packaging:

• 500 ml.

Textured casting wax (morka).

• Green color.
• Clearly veined.
• Thickness 0.4mm.
• Size 15x7.5cm.

Characteristics:

• Proven wax for modeling maxillary denture plates.
• The wax texture gives the denture plate a more anatomical surface.
• It adapts well and adheres precisely to the model.

Packaging :

• 15 pcs/pack

Flexible silicone polishing erasers.

For processing:

• Porcelain.
• Precious alloys.
• Acrylic.

Characteristics:

• White, coarse-grained eraser.
• For pre-treatment.
• Speed: 7,000- 10,000 rpm.
• Size 22x4mm.

Packaging:

• 1 pc or 100 pcs

Moldyna for adaptation - supplement.

Packaging:

• 1 piece.

Remanium 2000 + alloy has excellent physical properties due to continuous casting production.

Application:

• Crowns and bridges.
• Telescopic crowns.
• Prosthetic restorations on implants.
• Glued bridges.
• Secondary elements in skeletal prostheses (combined works).
• The alloy does not require oxidation.

Chemical composition in %:

• every 61st
• Cr 25.
• Mo 7.
• In 5.
• Si 1.5.
• Mn,N < 1%.

Technical data :

• Yield strength Rp 0.2 - 700 MPa.
• Tensile strength Rm - 900 MPa.
• Hardness HV 10 - 340.
• Total elongation at break A5 - 7.0%.
• Young's modulus (modulus of elasticity) - 200,000 MPa.
• Density - 8.6g/cm3.
• WAK 25- 500 C 14x10- 6K- 1.
• Initial melting point - 1325 °C.
• Final melting point - 1415 °C.

Packaging:

• 1 piece.

Medium-hard, inorganic modeling wax for conventional crown and bridge techniques. Optimized for modeling with an electric wax knife.

Renfert catalog number 4950200

Characteristics:

• Opaque gray color.
• It allows for optimal operation at low temperatures and cools down very quickly.
• It achieves high modeling precision.

Packaging:

• 1pc/75g

GEO cervical wax, burgundy transparent.

Renfert catalog number 4861000

Characteristics:

• Wax for shaping the edges of crowns.
• Very little shrinkage, stable, can be applied precisely and thinly to the edge of the fitting.
• It has good surface treatment properties.

Packaging:

• 1pc/75g.

GEO-Dip yellow wax for the soaking technique.

Renfer catalog number 4823000

Characteristics:

• Wax for use in electric heaters.
• Produced in the form of practical granules.
• Thanks to its excellent quality and flexibility, it enables precise production of wax caps.

Packaging:

• 1pc/200g.

Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.

• Dimensions 25x15mm.

Packaging:

• 1 piece.

Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.

• Dimensions 20x10mm.

Packaging:

• 1 piece.

Silicone glass size L

• 65ml.

Packaging:

• 1 piece.

A polishing cloth made of delicate cotton, irreplaceable in every laboratory.

Characteristics:

• Soft.
• For the polisher.
• Diameter 100 mm
• Thickness 7 mm.

Packaging:

• 1 piece.

Stiffened rag with a diameter of 100 mm.

Packaging:

• 1 piece.

Carborundum discs for cutting Cr-Co.

Characteristics:

• Size 25x06mm.

Packaging:

• 1 piece.

Hotty LED wax melting pot.

Renfert catalog number 14610000

Advantages:

• Suitable for all dipping waxes due to the temperature setting of 60 – 110°C.
• Uniform thickness of the wax layer in the cap thanks to uniform temperature distribution.
• Fast and precise hat making.
• The temperature is entered via a foil-covered keyboard and displayed on the LED display.
• 3 years warranty

Technical data:

• Permissible mains voltage 220 - 240 V
• Permissible mains frequency 50 - 60 Hz
• Power consumption 25 W
• Temperature range 60 - 110°C
• Weight 400 g
• Dimensions (width x height x depth) 90 x 65 x 98 mm

Packaging:

• 1 piece.

Takanishi synthetic brushes size 1.

Renfert catalog number 17140001

Characteristics:

• Tip diameter at the widest point: 0.8 mm.
• Tip length: 7 mm.
• Handle length: 28 mm.
• They remain flexible for a long time.
• They have a wide range of shapes.

Packaging:

• 1 piece.

• Keystone spirit burner.

Advantages:

• The wick is durable and maintains a steady flame.
• Made of durable plastic.

Packaging:

• 1 piece.

Silicone glass size M

• 25ml.

Packaging:

• 1 piece.

The highest quality hard polishing rubbers.

Suitable for machining materials such as chrome, cobalt, precious and non-precious alloys.

Characteristics:

• Blue, coarse-grained eraser.
• For pre-treatment.
• Speed : 5,000- 10,000 rpm.
• Diameter 22x3mm

Packaging:

• 1 piece.

Moore's Disc Mandrel.

For contra-angles.

Packaging:

• 1 piece.

SR Ivocron Press Liquid.

Liquid for pressure polymerization (canning technique).

Application:

• Veneering crowns and bridges.

Packaging:

• 100 ml.

Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.

• Dimensions 30x15mm.

Packaging:

• 1 piece.

Rolloblast polishing beads,

Grain:

• 50 µm Renfert catalog number 15941305
• 110 µm Renfert catalog number 15891005

Characteristics:

• For sandblasting metals.
• For cleaning all-ceramic crowns.

Packaging:

• 5kg.

Grinding discs.

Characteristics:

• Very durable.
• For grinding after cutting off the casting channels.
• Disc diameter 22x3mm.

Packaging:

• 1 piece.

Wax Stencils KR Retention Comb.

Characteristics:

• Made of the best raw materials.
• No fillers.
• Burning without residue.

Packaging:

• 200pcs/pack

Sandpaper holder.

• Maximum speed 16000 rpm

Packaging:

• 1 piece.

Vertex Divosep Blue.

• Preparation for isolating acrylic from plaster and plaster from plaster.
• Universally applicable to both cold and hot curing acrylics.

Packaging:

• 1000 ml

Empty aluminum tubes with caps for injection of thermoplastic materials.

• Diameter 22mm
• Height 90 mm

Packaging:

• 30 pcs

Empty aluminum tubes with caps for injection of thermoplastic materials.

• Diameter 22mm
• Height 120 mm

Packaging:

• 30 pcs

The best in every way. When high-quality tools are required, there is no alternative to the KaVo KPOWERgrip.

Advantages

• Micro motor with exceptionally high torque (up to 7 Ncm) guarantees full versatility of work in all conditions and with any materials.
• The noiseless and vibration-free operation of the induction motor promotes concentration at work.
• The reduced weight of the handpiece and the ultra-flexible cable allow freedom of action when performing prosthetic works.
• The modern, specially developed grip surface for the KPOWERgrip guarantees a comfortable and secure grip of the handpiece.
• 12 months warranty.

Characteristics:

• 20% more efficient cooling.
• Modern construction technology guarantees reduced heating of the handpiece.
• Secure and stable grip of the tool during work.
• A completely new cover has been developed for the K-POWERgrip to make it easier to work properly.
• More power in every situation.
• The new micromotor has increased power and torque.
• More freedom while working.

Technical data:

• Rotation range 1.000 - 50.000 rpm
• Max torque 7Ncm
• Drive without brushed DC motor
• Power on the cutter 150 W

Packaging:

• 1 piece.

Dry polishing paste.

Characteristics:

• The wax-bound paste enables clean and largely dust-free work.
• It does not contain quartz harmful to health.
• Blue paste for initial and final polishing of cobalt chrome alloys.

Packaging:

• 1pc/500g

Surgical blades.

Characteristics:

• Made of carbon steel.
• Sterile.
• Disposable.
• Available in several sizes and for 2 types of handles.

Packaging:

• 100pcs

Vertex Castapress cold curing acrylic.

Characteristics:

• Color 10 pink with veins
• Vertex Castapress polymerizes at 55 °C under 2.5 bar pressure for 30 minutes.
• Easy and convenient to use.

Application:

• Complete dentures.
• Partial dentures.
• skeletal prostheses.
• Denture relines.
• Denture repairs.
• Rebasing of full and partial dentures made of cold-curing acrylics.

Packaging:

• 1000g

Plastic casting ring with base 75x75mm.

Packaging:

• 1 piece.

Cotton brush "lamb"

Characteristics:

• Very delicate.
• Diameter 60mm.
• For the polisher.

Packaging:

• 1 piece.

Felt cone made of high-quality felt - mounted on a pin to the handpiece.

• Different shapes.

Packaging:

• 1 piece

Unipurol is a concentrate for removing impurities after gypsum, cement, alginates, polishing pastes for degreasing and derusting surfaces.

Characteristics:

• Especially recommended for ultrasonic cleaners.
• The liquid does not affect the structure of metal, varnished and plastic surfaces.
• Does not expose to aggressive action in case of direct contact with the skin /pH 5/.
• Removal of plaster from dentures and interdental spaces as well as calculus from used dentures.
• Degreasing metal parts after polishing or before electropolishing.
• Cleaning trays and tools from alginate impression materials, gypsum and cement residues.
• Due to the degreasing effect of the liquid, cleaning of spoons and tools can be combined with pre-washing.

Packaging:

• 1l.