Diamond flame drill bit. Turbine (Ø1.60mm)

Packaging:

• 1 piece.

Long flame diamond drill bit. Turbine (Ø1.60mm)

Packaging:

• 1 piece.

Molds for the bases of plaster models.

Characteristics:

• Made of flexible rubber, they facilitate the formation of models, speed up the process of creating models and help keep them clean.
• Made of strong and easy to clean material.
• There are 2 types of OK maxilla and UK mandible.

Packaging:

• 1 piece.

Estetic S repair powder 500g.

Tear off securing tape around the nut:

Packaging:

• 1 piece

Synthetic brush No. 00 - for porcelain

Packaging:

• 1 piece.

Villacryl H Rapid, acrylic liquid for hot polymerization.

Package:

400 ml.

Hatho - brush soft green silicone cotton. For thermoplastics and acrylic.

Package:

1 piece

Telescopic crown forceps 13 cm.

Advantages:

• Tips with diamond grit.
• Excellent grip on indoor telescopes thanks to optimal geometry.
• The primary crown is firmly attached, so the secondary crown can be easily removed.
• Length approx. 13 cm.

Packaging:

• 1 piece.

A cuvette designed specifically for mixing alginate masses.

Renfert catalog number 18230500

Advantages:

• Thanks to the mixer designed specifically for mixing alginates, the mixture is free of air bubbles after mixing.
• Easy cleaning thanks to the surface of the litter box being covered with a special coating.

Packaging:

• 1 piece

Self-curing, burning without residue, Form Plast acrylic material is intended in particular for modeling prosthetic restorations, crowns, telescopic crowns, clasps, adhesive bridges, as well as for all auxiliary work in the dental technology laboratory and dental office.

Characteristic:

• It burns out without a trace

• Economical packaging

• Contrasting red color

Benefits:

• Minimal polymerization shrinkage

• Short polymerization time

Package:

• 30g / 2x12ml

• Thanks to the quick gelation of the mass, it does not run off the plaster model

Fastening screw for the Labo Mate 100 articulator

Package:

• 1 piece

TWEED prosthetic forceps. To form loops. Made of the highest quality stainless steel.

• Length 135mm.
• For wire max.0.5mm.
• Diameter of the working part - 1.2mm; 1.8mm;2.4mm.

Packaging:

• 1 piece.

Additional right tank, with sandblasting nozzle 1.2 mm 70-250 microns.

Renfert catalog number 29540250

• Tank assembly in just a few steps.
• Tool-free tank replacement with quick connector and color-coded system.

Packaging:

• 1 piece

Additional left tank for the Vario Basic sandblaster, with a 0.8mm 25-70 micron sandblasting nozzle.

Renfert catalog number 29540051

Advantages:

• Tank assembly in just a few steps.
• Tool-free tank replacement with quick connector and color-coded system.

Packaging:

• 1 piece

Silicone ring for IPS Empress 2, IPS Empress Esthetic and IPS e.max. Size small 100g.

Packaging:

1 piece.

Silicone ring for IPS Empress 2, IPS Empress Esthetic and IPS e.max.

• Large size 200g.

Packaging:

• 1 piece.

Zirconium ST Color A3.5 AG 89-71-18 mm - short expiry date.

Packaging:

• 1 piece

Plaster bowl No. 1.

Dimensions:

• diameter 11cm
• height 8cm

Package:

1 piece.

Steel wire brush 0.08 mm, without handle, diameter 21 mm.

Packaging:

• 1 piece

Blocks for making impression materials.

Dimensions:

• 9 x 16 cm

Packaging:

• 1 piece

The Klettfix system is an affordable solution for wet trimming, ensuring high cutting efficiency.

Renfert catalog number 18031100 - grit 80, 18031200 - grit 120

Advantages:

• Disc for MT Plus./ MT 3/ MT3 pro.
• Gradation 80 (coarse) or 120 (fine)
• Diameter 23.4 cm

Packaging:

• 1 piece.

LED lamp for hardening materials for individual trays and other light-curing materials.

Characteristics:

• Optimal lighting of the polymerization chamber: 4 LED fluorescent lamps emitting in the range of 365-405 nm.
• Fast hardening thanks to the special arrangement of efficient fluorescent lamps and reflectors.
• Uniform cure in 0-15 minutes with set exposure time and automatic shut-off function controlled by a mechanical timer.
• Large polymerization chamber that can accommodate up to 4 models at the same time.
• Simple operation.
• High level of safety thanks to well-insulated electronics that meet appropriate standards.
• Low space requirement thanks to compact design.

Technical data:

• External dimensions 215 (L) x 295 (W) x 115 (H) mm.
• Weight 2 kg.
• Voltage 220/240V 50Hz.
• Emission range 365~405 nm.
• Power consumption 9W.

Packaging:

• 1 piece

Acrylic material intended for making acrylic parts in frame dentures, as well as for making complete dentures using the pouring method. It can also be used to repair dentures or to make temporary or immediate dentures.

Characteristics:

• Easy to prepare and process.
• It allows for quick fabrication of a prosthesis using the pouring method using silicone precasts.
• Provides the patient with comfort when using the prosthesis.
• It masks the metal structure of the denture well.
• High aesthetics of the prosthesis thanks to natural colors.
• Color stability.
• Does not contain heavy metals.
• Biologically neutral.

Packaging:

• 500g powder/300ml liquid

A knife for silicone masses.

Package:

1 piece.

Abrasive metal strip. Width 8mm, length 13.5 cm.

Package:

12 pcs.

Anatomical tweezers 20cm.

Package:

1 piece.

Rubber base for ring no. 1

Dimensions:

• Diameter 30-32 mm

Packaging:

• 1 piece.

Smart- Pins for pinning machine.

• Smart-Pin small pin drill bit 1.57 mm x 3.0 mm

• Smart-Pin medium pin drill bit 1.59 mm x 3.0 mm

• Smart-Pin large pin drill bit 1.61 mm x 3.0 mm

Renfert catalog number 3670157 - 1.57mm

Renfert catalog number 3670159 - 1.59mm

Renfert catalog number 3670161 - 1.61mm

Advantages:

• Very high service life, special blade geometry ensures very low drilling resistance and maximum rotational symmetry
• Suitable for use with all pins with a head diameter of 1.6 mm, especially recommended for Smart-Pin/Profix.
• Drill shank diameter 3.0 mm (for pinning machine)
• Drilling depth 10.5 mm

Packaging:

• 1 piece.

Class IV plaster for model bases, perfectly flowing, dark blue in color.

Advantages:

• Very liquid consistency.
• It does not require work with a vibrating table.
• No air bubbles between the pins.
• Low expansion.
• Absolutely smooth surface.
• High final hardness.
• Big time savings.

Physical properties:

• Setting time 10-12 minutes.
• Dry compressive strength 70 MPa.

Linear expansion:

• after 2 hours 0.06%.

Preparation:

• Gypsum / distilled water: 100g / 23 ml.
• Operating temperature 23°C.

Packaging;

• 5kg

Duplicating silicone. hardness 22 acc. Shore - A. Red color.

Dublisil 22 Plus is a universal silicone for duplicating models in all prosthetic works. It is distinguished from others by its excellent mechanical properties, e.g. very high tear resistance. With proper handling during mixing and pouring (a thin stream of silicone) we can get a perfectly duplicated model. The cast molds are completely free of shrinkage, and the remarkable consistency and exceptionally long shelf life of the models have been achieved thanks to the use of platinum as one of the components of Dublisil 22 Plus.

The mold can be poured many times without losing the precision of the negative. The surface of the duplicated model is smooth and hard without any deformation or deviation.

Advantages:

• Very high tear resistance 250%.
• Resistance to deformation 99.6%
• Easy to mix.
• Excellent fluidity.
• Perfect reproduction of details.
• Long-term dimensional stability and resistance to deformation.
• Compatible with all types of gypsum, polyurethane resins, molding sands and acrylic resins.

Technical data:**

• Mixing time: 45 seconds (+/- 15 seconds).
• Setting time: 5 minutes (+/- 1 minute).
• Model release time 25 min (+/- 5 min).

It is recommended to mix and duplicate at room temperature 23 °C and air humidity of about 50%.

Packaging:

• 1kg + 1kg.

Denture cleaner powder - thanks to its cleaning properties, it effectively removes discoloration caused by consumed food or smoking nicotine.

Characteristic:

• It removes discoloration caused by consumed food and smoking nicotine

• It cleans the denture, giving it a whitening effect.

Advantages:

• Speed of action

• It does not deform the material from which the prosthesis is made

Package:

• 150g

Copy pencil.

The core of the pencils is made of erasable clay (not subject to firing), soaked in a water-soluble dye. The copy pencil leaves traces that are resistant to erasure.

• Pencils are available in two types with red or blue graphite.

Packaging:

• 1 piece.

Adapta putty for easy and quick forming of crown caps.

Packaging:

• 1 glass of moldyna.
• 1 foil holder.
• 50 Adapta foils 0.6 mm.
• 20 0.1 mm foils.

Oral Tips intraoral tips for light silicone materials, used for precise application of the material. It is applied to the mixing tip.

Packaging:

• 1 pc or 48 pcs

GEO assortment of casting wax, one color concept. All wax elements are colored turquoise. It has high translucency, which allows optimal cutting of the marked lines.

Renfert catalog number 6330000

Advantages:

• High stability under pressure.
• Smooth surface.
• Optimum flexibility when applying.
• Burns without residue.
• All parts of the set can be ordered separately.

Packaging:

• 4 pieces of casting wax, smooth 0.3 mm
• 4 pieces of pouring wax, finely textured, 0.35 mm and 0.5 mm
• 4 pieces of coarsely textured casting wax 0.5 mm
• 5 pcs. Casting- Wax 0.6 mm
• 3 pcs. Bonhard clasps
• 3 pcs. molar clasps
• 3 pcs. clasps for premolars
• 3 pcs. ring buckles
• 3 pieces of mesh retentions with round meshes
• 10 pieces of lower jaw arches
• 10 pieces of lower retention
• 10 pieces of wax wire in 0.8mm rods
• 30 g of modeling wax
• 30 g of wax to block undertones.

Erkoflex foil 120x1.5mm.

For making splints for whitening, fluoridation, bite splints, transfer splints for brackets, positioners.

Characteristics:

• Soft.
• Diameter 120mm.
• Made of ethylene vinyl acetate (EVA).

Packaging:

• 50 pcs.

Wiedent teeth by Vita, thanks to their three-layer structure and fluorescent effect, reproduce natural teeth almost perfectly. The varied assortment allows for permanent or removable replacement of all types of cavities in patients' teeth, both in terms of shape and color.

Characteristics:

• They are three-layered, with a fluorescent effect, and with anatomical shapes.
• They are manufactured in accordance with the PN EN ISO 3336:2000 and EN ISO 7491:2000 standards.
• They do not contain any of the harmful substances listed in Directive 67/548/EEC.
• They require cleaning of wax with boiling water and degreasing with acrylic monomer in order to obtain optimal connection with the denture base.
• They may be a source of dust during prosthetic work, it is recommended to use appropriate personal protective equipment to avoid dust inhalation.
• Dentures can only be cleaned with toothpaste, toothbrushes or denture care products.
• Store in a clean, dry and out of sunlight place.
• It is best to use it within no more than 9 years of production.

Applicable:

• Complete dentures.
• Partial dentures.
• Skeletal prostheses.

Packaging:

Flap 6 pcs.

Wiedent teeth according to Vita, thanks to its three-layer structure and fluorescent effect, reproduces natural teeth in a near perfect manner. The varied assortment allows for permanent or removable replacement of all types of cavities in patients' teeth, both in terms of shape and color.

Characteristics:

• They are three-layered, with a fluorescent effect, and with anatomical shapes.
• They are manufactured in accordance with the PN EN ISO 3336:2000 and EN ISO 7491:2000 standards.
• They do not contain any of the harmful substances listed in Directive 67/548/EEC.
• They require cleaning of wax with boiling water and degreasing with acrylic monomer in order to obtain optimal connection with the denture base.
• They may be a source of dust during prosthetic work, it is recommended to use appropriate personal protective equipment to avoid dust inhalation.
• Dentures can only be cleaned with toothpaste, toothbrushes or denture care products.
• Store in a clean, dry and out of sunlight place.
• It is best to use it within no more than 9 years of production.

Application:

• Complete dentures.
• Partial dentures.
• Skeletal prostheses.

Packaging:

Flap 8 pcs.

Acrybond a preparation that activates the connection between teeth and acrylic. Ensures that the teeth are permanently attached to an acrylic denture.

Package:

• 75 ml.

Edelweiss, a liquid for polishing plastics.

Package:

• 1000g.

Villacryl H Plus, a heat-polymerized polymethacrylate material, intended for making base plates of full and partial dentures.

Characteristics:

• Easy to prepare and process.
• It ensures the comfort of using the prosthesis.
• High aesthetics of the prosthesis thanks to natural colors.
• Increased mechanical strength.
• Free of heavy metals and tertiary amines.
• Biologically inert.

Packaging:

• 2 kg

Estetic acrylic material for making denture plates, polymerizing hot.

Available colours:

• 0 colorless
• 8 pink without veins
• 10 pink without veins
• 8V pink with veins
• 10V pink with veins

Characteristics:

• requires short polymerization time,
• characterized by low water and saliva absorption,
• excellent plasticity and ease of shaping under the pressure of the press does not increase the short-circuit,
• can be combined with soft, flexible bedding,
• translucency of the mass allows to bring out the natural color of the patient's mucosa,
• meets the requirements of the PN-EN ISO 20795-1 standard.

Technical data:

• mixing ratio: powder/liquid weight - 2:1,
• dough preparation time: 10-15 minutes,
• dough shelf life: 15 minutes,
• residual monomer content: 1.33%,
• breaking strength: 73.0 Mpa,
• bending elasticity: 2334 MPa,
• solubility: 0.1 μg/mm3,
• sorption: 22.6 μg/mm3.

Polymerization process:

• put the can in boiling water (in the case of thick dentures in cold water and bring to the boil),
• keep at 100°C for 20 minutes,
• cool in water to room temperature.

Packaging:

• 500g.

Estetic S, acrylic repair fluid.

Package:

50ml.

• Strong 207 prosthetic micromotor with powerful H450 handpiece [new type]

• Universal, brush prosthetic micromotor designed to work with all materials (acrylic, metal, ceramics) under medium and low load.

• The successor to the popular "Marathon N7r" engines

Characteristics:

• Power: 100 Watts
• Standard micromotor with low vibration carbon brushes.
• 45000rpm
• Torque: 6ncm
• Manually adjustable speed.
• Built-in microprocessor.
• Right/left rotation.
• 12 months warranty
• Foot pedal switch or after mounting under the tabletop, also with a knee with full smooth speed control.
• On/off switch and speed control also in the power supply on the table.
• Compliant with European Union CE standards

Packaging:

• 1 piece.

Plaster bowl size 3

Dimensions:

• Diameter 140mm

• The color blue

Package:

1 piece.

Corundum discs for cutting casting channels.

• Diameter 38 mm
• Thickness 1.0mm

Package:

• 1 piece

Villacryl Thermo Iso-clear High temperature resistant light-curing insulator. Perfect for all types of thermoplastics.

Package:

• 30 ml.

Futura Sep Plus is a one-component insulating material based on alginate for isolating plaster from plastics.

Packaging:

• 1l.

Standard instrument for capturing crowns.

Package:

1 piece.

Ceramic crucible for the Induret Compact vacuum-pressure foundry.

Packaging:

• 1 piece.