Remanium wire 1.1mm round 10m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 1.1mm wire.
- Length 10m.
- Resilient - hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1800 - 2000.
Packaging:
- 1 Roll/10m
Futura Press LT Polymer 1000g
FuturaPress LT is an acrylic resin for cold curing.
Characteristics:
- For the production of acrylic elements of skeletal dentures.
- For relining and repairs.
Package:
- 1000g.
Felt cone 45x25mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 45x25mm.
Packaging:
- 1 piece.
The holder for the contra-angle
Holder for rubber bands and discs. For the contra-angle.
Package:
1 piece.
FuturAcryl 2000 Monomer 500ml
FuturAcryl 2000, acrylic liquid for hot polymerization.
Package:
500ml.
Hatho - brush 80mm white hard bristles + fleece
Hatho - brush 80mm white hard bristles + fleece. For thermoplastics and acrylic.
Package:
1 piece.
Erkoflex foil Ø 120mm x 2.0mm 50 pieces
Erkoflex foil 120x2.0mm
Characteristics:
- Soft.
- Diameter 120mm.
- For making rails for carrying locks and protectors for athletes.
- Made of ethylene vinyl acetate (EVA).
Packaging:
- 50 pcs.
Paladon 65 Polymer 1000g
Paladon 65, acrylic resin for making dentures. Hot polymerization.
Benefits:
- long-term stability of dentures,
- long, user-friendly development time,
- low shrinkage during polymerization,
- low content of residual monomers immediately after the prosthesis is made.
Package:
- 1000g.
Metal thickness gauge Schuler Dental
Steel thickness gauge for metal.
Features:
- Needle-shaped measuring tips.
- Accuracy 0.1 mm.
- Measurement range 0-10 mm.
- Scale on both sides.
Package:
1 piece.
String bags 20x25cm
String bags with dimensions of 20x25cm. Perfect for transporting impressions and finished prosthetic works.
Package:
100 pcs
Wirolyt 1000 ml.
Fluid for electrolytic polishing of chrome-cobalt alloys.
Wirolyt is suitable for devices from various manufacturers. Provides high effectiveness.
Packaging:
- 1000 ml
WiroFlex rubber rings
Rubber polishing wheels. WiroFlex.
Features:
- Very thin and flexible.
- Applicable to all dental alloys.
- Diameter 22x1.2mm.
Package:
1 piece.
Futura Press LT Monomer 500ml
Futura Press LT, acrylic liquid for cold polymerization.
Package:
500ml.
Large plaster separator
Two-sided separator with diamond coating. For cutting plaster models.
Description:
45mm diameter.
Diamond coating according to / ISO 514 (60/40 microns) - Fine
Diamond grit acc. To / ISO 524 (100/80 microns) - Coarse
Package:
- 1 piece.
Small plaster separator
Double-sided separator with a diamond coating for cutting gypsum models.
Description:
30mm diameter
Diamond coating according to / ISO 514 (60/40 microns) - Fine
Diamond grit acc. To / ISO 524 (100/80 microns) - Coarse
Package:
- 1 piece.
Bredent Crea.Lign GUM 5g
Crea.lign paste Tint GUM
Crea.lign veneering composite for permanent veneering of metal, ceramic and polymer substructures. The unique material properties adapt the flexibility and hardness of crea.lign to different framework materials. Crea.lign contains only nanoparticles and no ground glass filler. It consists of 50% opalescent ceramic filler and high-strength oligomer matrix.
Packaging:
- 5g
Yellow mud wax 200g Schuler Dental
Wax in blocks for sandwiches
Performing wax:
- Caps for crowns, using the soaking technique.
- Yellow super soft.
Features:
- exact match
- ready-to-dip wax temperature 85 - 90 degrees ° C.
- within 1 second of immersion, we will get a 0.4 mm thick cap
- solidification point of wax 74 degrees ° C ..
Package:
200 g
Remanium 2001
Remanium 2001 porcelain alloy. It is especially suitable for melting with an oxygen propane burner. Easily processed, soldered, welded, eroded and milled. Corrosion resistant. Free of nickel, beryllium and iron.
Chemical composition in%:
- Every 63%
- Cr 23%
- Mo 7.3%
- In 4.3%
- Si 1.6%
- Mn, N <1%.
Technical data:
- Yield point Rp0.2 - 660 MPa.
- Tensile strength Rm - 850 MPa.
- HV hardness 10 - 336.
- Total elongation after rupture A5 - 5.5%.
- Young's modulus (modulus of elasticity) - 195 GPa.
- Density - 8.6 g / cm3.
- WAK 25- 500 C - 14.2x10- 6K- 1.
- Initial melting temperature - 1325 degrees C.
- Final melting temperature - 1415 degrees C.
Package:
1 piece.
Prosthetic forceps KP-067-125-PMK
Concave-convex prosthetic forceps. For forming staples and wire. Made of high quality stainless steel.
- Length 125mm.
- For wire max.0.7mm
- The diameter of the working tip is 0.9 mm
Packaging:
- 1 piece.
Kramp prosthetic forceps KP-094-150-PMK
Universal Krampon prosthetic forceps. so-called dolphins. Made of high quality stainless steel.
- Length 150mm
- For wire max.1mm
Packaging:
- 1 piece.
GEO TK and Bonyhard wax stencils
GEO Bonyhard clasps, TK wax templates and Bonyhard clasps.
Renfert catalog number 6383010
Packaging:
- 10 panes/200 pcs.
Bego silicone ring
Silicone ring system.
Characteristics:
- Sizes 3,6,9
- Time saving compared to cuff systems, metal rings.
- Low consumption, therefore more economical compared to other systems.
- Easy mold release from the ring.
Packaging:
- 1 piece.
Mizzy stones number 5 22mm 1 piece or 50 pieces
MIZZY White stones are made of aluminum oxide.
Application:
- For porcelain.
- Precious and semi-precious metals.
Advantages:
- They cut quickly and accurately and wear evenly.
- Size 5 diameter 22.2 x 3.1mm.
Packaging:
- 1pcs or 50pcs
Packaging:
- 1pcs or 50pcs
Top Dent brush 55mm 22716
3-layer bristle brush, tapered. Universal with a diameter of 55mm.
Package:
1 piece.
Stain-Mix paint palette with black lid
Palette for mixing ceramic and composite paints.
Renfert catalog number 10650100
Advantages:
- The black cover protects light-curing materials.
- 30 small recesses with sharp edges for removing paint from the brush.
- 1 large well for glaze liquid.
Plate dimensions:
- 155x95mm
Packaging:
- 1 piece.
Bredent VKS-OC yellow dies 1.7 mm (8 pcs.)
Vario-Kugel-Snap yellow dies.
- 1.7mm.
Packaging:
- 1pack/8pcs
Bredent VKS-OC 1.7 Titanium Matrix Cases (2 pcs.)
Vario-Kugel-Snap titanium die housings.
- 1.7mm.
Packaging:
- 1pc/2pcs
Lamb brush Ø 80mm 1 piece
Cotton brush "lamb".
Characteristics:
- Very delicate.
- Diameter 80mm.
- For the polisher.
Packaging:
- 1 piece.
Lamb brush Ø 90mm 1 piece
Cotton brush "lamb".
Characteristics:
- Very delicate.
- Diameter 90mm.
- For the polisher.
Packaging:
- 1 piece.
4Shine Polishing paste 250g - NEW
Polishing paste for mirror polishing of acrylic, thermoplastic and metal materials.
Packaging:
- 250g
Suction nozzle for Renfert extractor
The suction tip allows you to connect dust extraction at the workplace.
Renfert catalog number 29250000
Advantages:
- Solid beech wood mounting.
- Secure attachment to a work table with a thickness of 20-40 mm.
- Connection of the suction hose on the right or left side.
- Removable sieve to prevent accidental sucking of elements from the table.
- Detachable suction part.
Technical data:
- The diameter of the suction hose connector is 40 mm.
Additional equipment:
- Protective glass. - To be ordered separately (number mikran1859)
Packaging:
- 1 piece without glass.
Splitter (crossover) for the extractor
Splitter and connectors for the exhaust hood.
Renfert catalog number 29260000
Advantages:
- It allows you to extract dust from 2 devices at the same time.
Packaging:
- Fume hood switch with 4 couplers (without hose)
Glass for the suction tip (glass only, without the suction tip)
Glass cover with handle (for suction opening)
Renfert catalog number 29251000
Packaging:
- 1 piece (glass only without suction tip)
Folia Erkolen Ø 120mm x 1,0mm 20szt
Folia Erkolen 1,0mm.
Cechy:
- Średnica 120mm.
- Spalają się bez pozostałości.
Do wykonywania:
- Prowizorkek koron i mostów.
- Utrzymywaczy przestrzeni dla żelowatych środków terapeutycznych.
Opakowanie:
- 20szt.
Zetaplus Intro Kit (Zetaplus + Oranwash + Indurent)
The kit consists of the following materials:
Zetaplus material intended for the first layer of a two-layer impression. Mass with increased hardness and resistance to deformation. It is a C-silicone produced on the basis of special spheroidal fillers, which facilitate the flow of the mass to hard-to-reach places in the prosthetic field. High final hardness is a unique advantage in the technique of two-layer two-time impression. In the technique of two-layer one-shot impression, the material is adapted to the consistency of the correction layer with a lower viscosity.
Oranwash L- (condensing) silicone with high fluidity. Due to the short time of working and taking an impression, it is recommended as a corrective mass in the technique of two-layer impressions. It is recommended to use Zetaplus as the base mass.
Indurent Gel is a universal catalyst for the base mass and correction mass type C. Indurent can be used for almost all condensation silicones produced by the Zhermack company (except for the impression materials of the Zetaflow line).
Package:
- Zetaplus 900 ml.
- Oranwsh 140 ml.
- Indurent Gel 60 ml.
Gypsum class III Stodent yellow 25kg
Stodent III is a type 3 hard plaster recommended for antagonist models and working models when making removable and skeletal dentures.
Description:
- Available in color: yellow.
- Small expansion.
- Good mechanical properties.
Advantages:
- Smooth surface.
- Easier model making thanks to high thixotropy.
- High resistance to fracture when released from the impression.
Technical data:
- Mixing proportions 30 ml / 100 g.
- Mixing time (vacuum) 30 s.
- Mixing time (manual) 60 – 90 s.
- Setting time 10 -14 min.
- Release time from the impression 45 min.
- Compressive resistance (after 1h ) 25 ± 2 MPa [> 20 MPa]
- Linear expansion (after 2 hours ) max. 0.15% [< 0.20 %]
Packaging:
- 25kg
Attention:
- Due to the heavy weight of the goods (25 kg), an additional fee will be added to the shipment.
Elite Double 8 1kg + 1kg
Addition silicone for duplicating models in the fabrication of skeletal dentures and other laboratory work.
Characteristics :
- Very high tear resistance of 320%.
- Ease of mixing.
- Perfect fluidity.
- Perfect reproduction of details.
- Long-term dimensional stability and resistance to deformation.
- Compatible with all types of gypsum, polyurethane resins, molding compounds and acrylic resins.
- Hardness - 8 Shore - A
Package:
- 1kg + 1kg.
Villacryl H Rapid 750g/400ml
Villacryl H Rapid, acrylic intended for rapid hot polymerization of basic plates of full and partial dentures.
Characteristics:
- Easy to prepare and process.
- Maximum shortening of hot polymerization time.
- High mechanical strength.
- Biologically neutral.
Packaging:
- 750/400ml.
Elite HD + Putty Normal 250ml + 250ml
Elite HD + Putty - silicone additive impression material for the first layer of double-layer impressions. The use of innovative nanotechnology enables very precise mapping of details. The mass is characterized by fluidity, tensile strength, resistance to deformation and temperature. Thanks to its properties, it is possible to accurately reproduce even in a humid environment.
Characteristic:
- For hand mixing.
- High precision and dimensional stability.
- High hardness after setting.
- Orange color.
Package:
250ml base + 250ml catalyst.
Elite HD + II layer
Elite HD + II layer hydrocompatible silicone addition impression material of low viscosity (light) and medium (regular) intended for the second layer of two-layer, two-time and simultaneous impressions. The selection of contrasting material colors allows you to see the smallest details. Elite HD + impression materials have excellent plasticity, high dimensional stability and tear resistance.
Characteristic:
- Mixing ratio 1: 1.
- Hydrocompatible.
- Thixotropic.
- Blue (light), purple (regular) colors.
- For dispensing into the impression material gun.
Package:
- 2x 50ml.
- 12 mixing tips.
Villacryl IT for individual spoons 750g/200 ml
Self-polymerizing acrylic material intended for making individual impression trays. The material is available in two colors: green and pink. Pink acrylic allows you to make occlusal patterns and try on the teeth positioned in wax directly on the plate (wax rolls).
Advantages:
- easy to prepare and process
- suitable for work immediately after mixing
- does not stick to hands
- short spoon preparation time
- does not contain heavy metals
Color:
- green
- pink
Technical data:
- Dough shelf life - 5'
- Time to prepare the dough for use - 30-60''
- Self-polymerization time - 9'
- Mixing proportions - 21 g of powder/6 ml (5.6 g) of liquid
- Breaking strength - >37 MPa
Packaging:
- 750g/200ml
Villacryl Hard relining material
Cold-cured acrylic. The material is intended for temporary relining of dentures directly in the patient's mouth.
Characteristics:
- Pink
- Low polymerization temperature in the patient's mouth
Benefits:
- Convenient for use in a dentist's office
- Easy to prepare and process
- Enables quick relining of the denture
- It bonds well with the denture plate
- It provides the patient with the comfort of using the prosthesis
- It does not contain heavy metals
- Biologically neutral
Package:
- 60 g + 40 ml + 10 ml
Tropicalgin impression material
Alginate chromatic impression material. It changes color from red to yellow. It has the consistency of a powder. It does not contain heavy metals and does not melt in the mouth. It guarantees exceptional accuracy of the impression. Pleasant and unique scent of exotic fruit ensures comfort for patients. Designed for taking impressions in the performance of partial dentures and skeletal dentures, for diagnostic models. The material has a 5-year warranty. It complies with the international ISO 1563 standards. It also has the European CE safety mark.
Advantages:
- Chromatic.
- Dust free.
- Pleasant smell of exotic fruit.
Application:
- For impressions when making removable dentures.
- At the buttons of diagnostic and working models.
- For making opposing impressions in the production of fixed and removable dentures.
Features:
- Mixing time 45 sec.
- Setting time on the spoon 2 min. 35 sec.
- Setting time in the mouth 1 min.
Package:
1 pack / 453 g.
lay:art evo brush size 2 NEW!!!
Lay:art evo is a premium brush with bionic bristles. The chemical composition of the newly developed fiber and its specific processing enable the brush bristles to absorb moisture and reproduce the flame shape known from high-class brushes. This allows for optimal moisture management. Lay:art evo fascinates with attention to detail and functionality.
Renfert catalog number 17240002
Advantages:
- Extraordinary durability thanks to innovative Bionic Hair.
- Optimal moisture removal thanks to the special molecular structure of the fiber.
- Perfect guidance of the ceramic mass when applying layers thanks to the delicacy, flexibility and dimensional stability of the brush tip.
- Various sized refill caps allow you to easily replace the brush tip and save money.
- Brush handles in various sizes made of high-quality anodized aluminum with refined ergonomics.
- Ergonomic design and low weight guarantee easy and relaxed work when applying layers of porcelain.
Packaging:
- 1 pc brush or 2 pcs refill